diff mbox series

[v3,2/2] arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication

Message ID 20240828112713.2668526-3-b-padhi@ti.com (mailing list archive)
State New, archived
Headers show
Series Add Remoteproc Support for TI's J722S SoCs | expand

Commit Message

Beleswar Prasad Padhi Aug. 28, 2024, 11:27 a.m. UTC
From: Apurva Nandan <a-nandan@ti.com>

The K3 J722S-EVM platform is based on the J722S SoC which has one
single-core Arm Cortex-R5F processor in each of the WAKEUP, MCU and MAIN
voltage domain, and two C71x DSP subsystems in MAIN voltage domain.

The Inter-Processor communication between the A72 cores and these R5F
and DSP remote cores is achieved through shared memory and Mailboxes.
Thus, add the memory carveouts and enable the mailbox clusters required
for communication.

Also, The remoteproc firmware like of R5F and DSPs in the MAIN voltage
domain use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash during booting of remotecores. Usage is
described as below:

	+===================+=============+
	|  Remoteproc Node  | Timer Node  |
	+===================+=============+
	| main_r5fss0_core0 | main_timer0 |
	+-------------------+-------------+
	| c7x_0             | main_timer1 |
	+-------------------+-------------+
	| c7x_1             | main_timer2 |
	+-------------------+-------------+

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
[ Enabled mailbox instances and Reserved timer nodes ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
---
v3: Changelog:
1) Reserved conflicting timer nodes with remoteproc firmware (reflected the same
in commit message).
2) Simplified $subject to clarify that this patch enables IPC and transferred
the details into commit message.

Link to v2:
https://lore.kernel.org/all/20240612112259.1131653-3-b-padhi@ti.com/

v2: Changelog:
1) Squashed Patch 2 and 3 from V1 into Patch 2 in V2 as they were doing
the same logical thing.

Links to v1:
https://lore.kernel.org/all/20240607090433.488454-3-b-padhi@ti.com/
https://lore.kernel.org/all/20240607090433.488454-4-b-padhi@ti.com/

 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 153 ++++++++++++++++++++++++
 1 file changed, 153 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index dd3b5f7039d7..cda6725cd254 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -51,12 +51,71 @@  secure_ddr: optee@9e800000 {
 			no-map;
 		};
 
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
 		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
 
+		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_0_memory_region: c7x-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_1_memory_region: c7x-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x1c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
 	};
 
 	vmain_pd: regulator-0 {
@@ -494,6 +553,100 @@  &sdhci1 {
 	bootph-all;
 };
 
+&mailbox0_cluster0 {
+	status = "okay";
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	mbox_main_r5_0: mbox-main-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c7x_1: mbox-c7x-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0 {
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+};
+
+&c7x_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
+	memory-region = <&c7x_1_dma_memory_region>,
+			<&c7x_1_memory_region>;
+};
+
 &serdes_ln_ctrl {
 	idle-states = <J722S_SERDES0_LANE0_USB>,
 		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;