@@ -208,6 +208,59 @@ rgmii_phy: ethernet-phy@1 {
};
};
+&package_thermal {
+ trips {
+ package_active1: trip-active1 {
+ temperature = <45000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ package_active2: trip-active2 {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ package_active3: trip-active3 {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ package_active4: trip-active4 {
+ temperature = <70000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ package_active5: trip-active5 {
+ temperature = <80000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&package_active1>;
+ cooling-device = <&fan 1 1>;
+ };
+ map2 {
+ trip = <&package_active2>;
+ cooling-device = <&fan 2 2>;
+ };
+ map3 {
+ trip = <&package_active3>;
+ cooling-device = <&fan 3 3>;
+ };
+ map4 {
+ trip = <&package_active4>;
+ cooling-device = <&fan 4 4>;
+ };
+ map5 {
+ trip = <&package_active5>;
+ cooling-device = <&fan 5 5>;
+ };
+ };
+};
+
&pcie2x1l1 {
linux,pci-domain = <1>;
pinctrl-names = "default";
This patch adds thermal trip points and cooling maps to the Turing RK1 in order to enable automatic control of the external PWM fan. The fan is not active below 45C, as the heatsink alone can generally keep the chip in this temperature region at idle load. This cooling profile errs on the side of quietness, since the RK1 is commonly deployed in a Turing Pi 2 clusterboard alongside three others, with additional cooling provided at the chassis level. Helped-by: soxrok2212 <soxrok2212@gmail.com> Signed-off-by: Sam Edwards <CFSworks@gmail.com> --- .../boot/dts/rockchip/rk3588-turing-rk1.dtsi | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+)