diff mbox series

regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel)

Message ID 20240913-regulator-typos-v1-1-92781c93f638@linaro.org (mailing list archive)
State New, archived
Headers show
Series regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel) | expand

Commit Message

André Draszik Sept. 13, 2024, 11:43 a.m. UTC
Some comments here are referring to a non-existent
regulator_ops::get_voltage_vsel() where ::get_voltage_sel() is meant,
and similar for ::set_voltage_vsel() / ::set_voltage_sel().

Update the comments.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/regulator/helpers.c          | 8 ++++----
 drivers/regulator/mt6357-regulator.c | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)


---
base-commit: 5acd9952f95fb4b7da6d09a3be39195a80845eb6
change-id: 20240913-regulator-typos-5c918985e91e

Best regards,

Comments

Mark Brown Sept. 13, 2024, 4:11 p.m. UTC | #1
On Fri, 13 Sep 2024 12:43:58 +0100, André Draszik wrote:
> Some comments here are referring to a non-existent
> regulator_ops::get_voltage_vsel() where ::get_voltage_sel() is meant,
> and similar for ::set_voltage_vsel() / ::set_voltage_sel().
> 
> Update the comments.
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel)
      commit: fb9ce84a01582c9d67dc51d5330136ea684172ef

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 6e1ace660b8c..0def82eb8b46 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -125,7 +125,7 @@  static int regulator_range_selector_to_index(struct regulator_dev *rdev,
  *
  * Regulators that use regmap for their register I/O and use pickable
  * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask
- * fields in their descriptor and then use this as their get_voltage_vsel
+ * fields in their descriptor and then use this as their get_voltage_sel
  * operation, saving some code.
  */
 int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
@@ -195,7 +195,7 @@  static int write_separate_vsel_and_range(struct regulator_dev *rdev,
  *
  * Regulators that use regmap for their register I/O and use pickable
  * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask
- * fields in their descriptor and then use this as their set_voltage_vsel
+ * fields in their descriptor and then use this as their set_voltage_sel
  * operation, saving some code.
  */
 int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
@@ -250,7 +250,7 @@  EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_pickable_regmap);
  *
  * Regulators that use regmap for their register I/O can set the
  * vsel_reg and vsel_mask fields in their descriptor and then use this
- * as their get_voltage_vsel operation, saving some code.
+ * as their get_voltage_sel operation, saving some code.
  */
 int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
@@ -276,7 +276,7 @@  EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
  *
  * Regulators that use regmap for their register I/O can set the
  * vsel_reg and vsel_mask fields in their descriptor and then use this
- * as their set_voltage_vsel operation, saving some code.
+ * as their set_voltage_sel operation, saving some code.
  */
 int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
 {
diff --git a/drivers/regulator/mt6357-regulator.c b/drivers/regulator/mt6357-regulator.c
index c0439a4e0b50..1eb69c7a6acb 100644
--- a/drivers/regulator/mt6357-regulator.c
+++ b/drivers/regulator/mt6357-regulator.c
@@ -123,7 +123,7 @@  struct mt6357_regulator_info {
  *
  * Regulators that use regmap for their register I/O can set the
  * da_vsel_reg and da_vsel_mask fields in the info structure and
- * then use this as their get_voltage_vsel operation.
+ * then use this as their get_voltage_sel operation.
  */
 static int mt6357_get_buck_voltage_sel(struct regulator_dev *rdev)
 {