| Message ID | 20240913121250.2995351-8-quic_srichara@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add minimal boot support for IPQ5424 | expand |
On Fri, Sep 13, 2024 at 05:42:49PM GMT, Sricharan R wrote: > From: Sricharan Ramabadhran <quic_srichara@quicinc.com> > > Add initial device tree support for the Qualcomm IPQ5424 SoC and > rdp466 board. > > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 63 +++++ > arch/arm64/boot/dts/qcom/ipq5424.dtsi | 294 ++++++++++++++++++++ > 3 files changed, 358 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq5424.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 197ab325c0b9..46c4eb758799 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq5424-rdp466.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > new file mode 100644 > index 000000000000..c8597a9ba175 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > @@ -0,0 +1,63 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * IPQ5018 MP03.1-C2 board device tree source > + * > + * Copyright (c) 2023 The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq5424.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ5424 RDP466"; > + compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424"; > + > + aliases { > + serial0 = &uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; Drop > +}; > + > +&tlmm { > + sdc_default_state: sdc-default-state { > + clk-pins { > + pins = "gpio5"; > + function = "sdc_clk"; > + drive-strength = <8>; > + bias-disable; > + }; > + > + cmd-pins { > + pins = "gpio4"; > + function = "sdc_cmd"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + data-pins { > + pins = "gpio0", "gpio1", "gpio2", "gpio3"; > + function = "sdc_data"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + }; > +}; > + > +&uart1 { > + pinctrl-0 = <&uart1_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&sleep_clk { sleep comes between tlmm and uart1 > + clock-frequency = <32000>; > +}; > + > +&xo_board { > + clock-frequency = <24000000>; > +}; > + > diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi > new file mode 100644 > index 000000000000..b6c08fac9482 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi > @@ -0,0 +1,294 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * IPQ5424 device tree source > + * > + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. > + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,ipq5424-gcc.h> > +#include <dt-bindings/reset/qcom,ipq5424-gcc.h> > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&intc>; > + > + clocks { > + xo_board: xo-board-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; I think Krzysztof lately suggested moving these clocks to board DT files. > + }; > + > + cpus: cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x0>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + L2_0: l2-cache { lowercase all labels > + compatible = "cache"; > + cache-level = <2>; > + cache-unified; > + next-level-cache = <&L3_0>; empty line (here and afterwards, before new subnodes. > + L3_0: l3-cache { > + compatible = "cache"; > + cache-level = <3>; > + cache-unified; > + }; > + }; > + }; > + > + CPU1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + enable-method = "psci"; > + reg = <0x100>; > + next-level-cache = <&L2_100>; > + L2_100: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + cache-unified; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU2: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + enable-method = "psci"; > + reg = <0x200>; > + next-level-cache = <&L2_200>; > + L2_200: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + cache-unified; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU3: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + enable-method = "psci"; > + reg = <0x300>; > + next-level-cache = <&L2_300>; > + L2_300: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + cache-unified; > + next-level-cache = <&L3_0>; > + }; > + }; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + /* We expect the bootloader to fill in the size */ > + reg = <0x0 0x80000000 0x0 0x0>; > + }; > + > + pmu { > + compatible = "arm,cortex-a55-pmu"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; I don't think you need CPU_MASK for GICv3 hosts. > + }; > + > + pmu-v7 { > + compatible = "arm,cortex-a7-pmu"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + dsu-pmu { > + compatible = "arm,dsu-pmu"; > + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; > + cpus = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>; > + status = "okay"; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + tz@8a600000 { > + reg = <0x0 0x8a600000 0x0 0x200000>; > + no-map; > + }; > + }; > + > + soc@0 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0 0 0 0 0x10 0>; > + > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq5424-tlmm"; > + reg = <0 0x01000000 0 0x300000>; > + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 0 50>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + uart1_pins: uart1-state { > + pins = "gpio43", "gpio44"; > + function = "uart1"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + }; > + > + gcc: clock-controller@1800000 { > + compatible = "qcom,ipq5424-gcc"; > + reg = <0 0x01800000 0 0x40000>; > + clocks = <&xo_board>, > + <&sleep_clk>, > + <0>, > + <0>, > + <0>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #interconnect-cells = <1>; > + }; > + > + qupv3: geniqup@1ac0000 { > + compatible = "qcom,geni-se-qup"; > + reg = <0 0x01ac0000 0 0x2000>; > + clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>, > + <&gcc GCC_QUPV3_AHB_SLV_CLK>; > + clock-names = "m-ahb", "s-ahb"; > + ranges; > + #address-cells = <2>; > + #size-cells = <2>; > + > + status = "okay"; > + > + uart1: serial@1a84000 { > + compatible = "qcom,geni-debug-uart"; > + reg = <0 0x01a84000 0 0x4000>; > + clocks = <&gcc GCC_QUPV3_UART1_CLK>; > + clock-names = "se"; > + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; > + status = "okay"; > + }; > + }; > + > + intc: interrupt-controller@f200000 { > + compatible = "arm,gic-v3"; > + reg = <0 0xf200000 0 0x10000>, /* GICD */ > + <0 0xf240000 0 0x80000>; /* GICR * 4 regions */ > + #interrupt-cells = <0x3>; > + interrupt-controller; > + #redistributor-regions = <1>; > + redistributor-stride = <0x0 0x20000>; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + mbi-ranges = <672 128>; > + msi-controller; No ITS? > + }; > + > + sdhc: mmc@7804000 { > + compatible = "qcom,ipq5424-sdhci", "qcom,sdhci-msm-v5"; > + reg = <0 0x07804000 0 0x1000>, <0 0x07805000 0 0x1000>; Please sort all nodes following the device addresses. > + reg-names = "hc", "cqhci"; > + > + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "hc_irq", "pwr_irq"; > + > + clocks = <&gcc GCC_SDCC1_AHB_CLK>, > + <&gcc GCC_SDCC1_APPS_CLK>, > + <&xo_board>; > + clock-names = "iface", "core", "xo"; > + > + status = "disabled"; > + }; > + > + timer@f420000 { > + compatible = "arm,armv7-timer-mem"; > + reg = <0 0xf420000 0 0x1000>; > + ranges = <0 0 0 0x10000000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + frame@f421000 { > + reg = <0xf421000 0x1000>, > + <0xf422000 0x1000>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; > + frame-number = <0>; > + }; > + > + frame@f423000 { > + reg = <0xf423000 0x1000>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + frame-number = <1>; > + status = "disabled"; > + }; > + > + frame@f425000 { > + reg = <0xf425000 0x1000>, > + <0xf426000 0x1000>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + frame-number = <2>; > + status = "disabled"; > + }; > + > + frame@f427000 { > + reg = <0xf427000 0x1000>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + frame-number = <3>; > + status = "disabled"; > + }; > + > + frame@f429000 { > + reg = <0xf429000 0x1000>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + frame-number = <4>; > + status = "disabled"; > + }; > + > + frame@f42b000 { > + reg = <0xf42b000 0x1000>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + frame-number = <5>; > + status = "disabled"; > + }; > + > + frame@f42d000 { > + reg = <0xf42d000 0x1000>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + frame-number = <6>; > + status = "disabled"; > + }; > + }; > + > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + }; > +}; > -- > 2.34.1 >
On 9/13/2024 6:22 PM, Dmitry Baryshkov wrote: > On Fri, Sep 13, 2024 at 05:42:49PM GMT, Sricharan R wrote: >> From: Sricharan Ramabadhran <quic_srichara@quicinc.com> >> >> Add initial device tree support for the Qualcomm IPQ5424 SoC and >> rdp466 board. >> >> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 63 +++++ >> arch/arm64/boot/dts/qcom/ipq5424.dtsi | 294 ++++++++++++++++++++ >> 3 files changed, 358 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5424.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 197ab325c0b9..46c4eb758799 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq5424-rdp466.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts >> new file mode 100644 >> index 000000000000..c8597a9ba175 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts >> @@ -0,0 +1,63 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * IPQ5018 MP03.1-C2 board device tree source >> + * >> + * Copyright (c) 2023 The Linux Foundation. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq5424.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ5424 RDP466"; >> + compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424"; >> + >> + aliases { >> + serial0 = &uart1; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; > > Drop > ok >> +}; >> + >> +&tlmm { >> + sdc_default_state: sdc-default-state { >> + clk-pins { >> + pins = "gpio5"; >> + function = "sdc_clk"; >> + drive-strength = <8>; >> + bias-disable; >> + }; >> + >> + cmd-pins { >> + pins = "gpio4"; >> + function = "sdc_cmd"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + >> + data-pins { >> + pins = "gpio0", "gpio1", "gpio2", "gpio3"; >> + function = "sdc_data"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + }; >> +}; >> + >> +&uart1 { >> + pinctrl-0 = <&uart1_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&sleep_clk { > > sleep comes between tlmm and uart1 > ok >> + clock-frequency = <32000>; >> +}; >> + >> +&xo_board { >> + clock-frequency = <24000000>; >> +}; >> + >> diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi >> new file mode 100644 >> index 000000000000..b6c08fac9482 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi >> @@ -0,0 +1,294 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * IPQ5424 device tree source >> + * >> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >> + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,ipq5424-gcc.h> >> +#include <dt-bindings/reset/qcom,ipq5424-gcc.h> >> +#include <dt-bindings/gpio/gpio.h> >> + >> +/ { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&intc>; >> + >> + clocks { >> + xo_board: xo-board-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; > > I think Krzysztof lately suggested moving these clocks to board DT > files. > ok will move >> + }; >> + >> + cpus: cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + CPU0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + reg = <0x0>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + L2_0: l2-cache { > > lowercase all labels > ok >> + compatible = "cache"; >> + cache-level = <2>; >> + cache-unified; >> + next-level-cache = <&L3_0>; > > empty line (here and afterwards, before new subnodes. > ok will add >> + L3_0: l3-cache { >> + compatible = "cache"; >> + cache-level = <3>; >> + cache-unified; >> + }; >> + }; >> + }; >> + >> + CPU1: cpu@100 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + enable-method = "psci"; >> + reg = <0x100>; >> + next-level-cache = <&L2_100>; >> + L2_100: l2-cache { >> + compatible = "cache"; >> + cache-level = <2>; >> + cache-unified; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU2: cpu@200 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + enable-method = "psci"; >> + reg = <0x200>; >> + next-level-cache = <&L2_200>; >> + L2_200: l2-cache { >> + compatible = "cache"; >> + cache-level = <2>; >> + cache-unified; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU3: cpu@300 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + enable-method = "psci"; >> + reg = <0x300>; >> + next-level-cache = <&L2_300>; >> + L2_300: l2-cache { >> + compatible = "cache"; >> + cache-level = <2>; >> + cache-unified; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + }; >> + >> + memory@80000000 { >> + device_type = "memory"; >> + /* We expect the bootloader to fill in the size */ >> + reg = <0x0 0x80000000 0x0 0x0>; >> + }; >> + >> + pmu { >> + compatible = "arm,cortex-a55-pmu"; >> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > > I don't think you need CPU_MASK for GICv3 hosts. > ok >> + }; >> + >> + pmu-v7 { >> + compatible = "arm,cortex-a7-pmu"; >> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; >> + }; >> + >> + dsu-pmu { >> + compatible = "arm,dsu-pmu"; >> + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; >> + cpus = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>; >> + status = "okay"; >> + }; >> + >> + psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; >> + >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + tz@8a600000 { >> + reg = <0x0 0x8a600000 0x0 0x200000>; >> + no-map; >> + }; >> + }; >> + >> + soc@0 { >> + compatible = "simple-bus"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges = <0 0 0 0 0x10 0>; >> + >> + tlmm: pinctrl@1000000 { >> + compatible = "qcom,ipq5424-tlmm"; >> + reg = <0 0x01000000 0 0x300000>; >> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + gpio-ranges = <&tlmm 0 0 50>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + uart1_pins: uart1-state { >> + pins = "gpio43", "gpio44"; >> + function = "uart1"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + }; >> + >> + gcc: clock-controller@1800000 { >> + compatible = "qcom,ipq5424-gcc"; >> + reg = <0 0x01800000 0 0x40000>; >> + clocks = <&xo_board>, >> + <&sleep_clk>, >> + <0>, >> + <0>, >> + <0>; >> + #clock-cells = <1>; >> + #reset-cells = <1>; >> + #interconnect-cells = <1>; >> + }; >> + >> + qupv3: geniqup@1ac0000 { >> + compatible = "qcom,geni-se-qup"; >> + reg = <0 0x01ac0000 0 0x2000>; >> + clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>, >> + <&gcc GCC_QUPV3_AHB_SLV_CLK>; >> + clock-names = "m-ahb", "s-ahb"; >> + ranges; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + status = "okay"; >> + >> + uart1: serial@1a84000 { >> + compatible = "qcom,geni-debug-uart"; >> + reg = <0 0x01a84000 0 0x4000>; >> + clocks = <&gcc GCC_QUPV3_UART1_CLK>; >> + clock-names = "se"; >> + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; >> + status = "okay"; >> + }; >> + }; >> + >> + intc: interrupt-controller@f200000 { >> + compatible = "arm,gic-v3"; >> + reg = <0 0xf200000 0 0x10000>, /* GICD */ >> + <0 0xf240000 0 0x80000>; /* GICR * 4 regions */ >> + #interrupt-cells = <0x3>; >> + interrupt-controller; >> + #redistributor-regions = <1>; >> + redistributor-stride = <0x0 0x20000>; >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + mbi-ranges = <672 128>; >> + msi-controller; > > No ITS? ITS/LPI is not supported. > >> + }; >> + >> + sdhc: mmc@7804000 { >> + compatible = "qcom,ipq5424-sdhci", "qcom,sdhci-msm-v5"; >> + reg = <0 0x07804000 0 0x1000>, <0 0x07805000 0 0x1000>; > > Please sort all nodes following the device addresses. > ok Regards, Sricharan
On Tue, Sep 17, 2024 at 11:58:29AM GMT, Sricharan Ramabadhran wrote: > > > On 9/13/2024 6:22 PM, Dmitry Baryshkov wrote: > > On Fri, Sep 13, 2024 at 05:42:49PM GMT, Sricharan R wrote: > > > From: Sricharan Ramabadhran <quic_srichara@quicinc.com> > > > > > > Add initial device tree support for the Qualcomm IPQ5424 SoC and > > > rdp466 board. > > > > > > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > > > --- > > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > > arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 63 +++++ > > > arch/arm64/boot/dts/qcom/ipq5424.dtsi | 294 ++++++++++++++++++++ > > > 3 files changed, 358 insertions(+) > > > create mode 100644 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > > > create mode 100644 arch/arm64/boot/dts/qcom/ipq5424.dtsi > > > > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > > > index 197ab325c0b9..46c4eb758799 100644 > > > --- a/arch/arm64/boot/dts/qcom/Makefile > > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > > @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb > > > +dtb-$(CONFIG_ARCH_QCOM) += ipq5424-rdp466.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb > > > diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > > > new file mode 100644 > > > index 000000000000..c8597a9ba175 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > > > + intc: interrupt-controller@f200000 { > > > + compatible = "arm,gic-v3"; > > > + reg = <0 0xf200000 0 0x10000>, /* GICD */ > > > + <0 0xf240000 0 0x80000>; /* GICR * 4 regions */ > > > + #interrupt-cells = <0x3>; > > > + interrupt-controller; > > > + #redistributor-regions = <1>; > > > + redistributor-stride = <0x0 0x20000>; > > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > > > + mbi-ranges = <672 128>; > > > + msi-controller; > > > > No ITS? > ITS/LPI is not supported. Ack
On 13/09/2024 14:12, Sricharan R wrote: > From: Sricharan Ramabadhran <quic_srichara@quicinc.com> > > Add initial device tree support for the Qualcomm IPQ5424 SoC and > rdp466 board. > > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 63 +++++ > arch/arm64/boot/dts/qcom/ipq5424.dtsi | 294 ++++++++++++++++++++ > 3 files changed, 358 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq5424.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 197ab325c0b9..46c4eb758799 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq5424-rdp466.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > new file mode 100644 > index 000000000000..c8597a9ba175 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts > @@ -0,0 +1,63 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * IPQ5018 MP03.1-C2 board device tree source > + * > + * Copyright (c) 2023 The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq5424.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ5424 RDP466"; > + compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424"; > + > + aliases { > + serial0 = &uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&tlmm { > + sdc_default_state: sdc-default-state { > + clk-pins { > + pins = "gpio5"; > + function = "sdc_clk"; > + drive-strength = <8>; > + bias-disable; > + }; > + > + cmd-pins { > + pins = "gpio4"; > + function = "sdc_cmd"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + data-pins { > + pins = "gpio0", "gpio1", "gpio2", "gpio3"; > + function = "sdc_data"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + }; > +}; > + > +&uart1 { > + pinctrl-0 = <&uart1_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&sleep_clk { > + clock-frequency = <32000>; > +}; > + > +&xo_board { > + clock-frequency = <24000000>; > +}; > + > diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi > new file mode 100644 > index 000000000000..b6c08fac9482 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi > @@ -0,0 +1,294 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * IPQ5424 device tree source > + * > + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. > + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,ipq5424-gcc.h> > +#include <dt-bindings/reset/qcom,ipq5424-gcc.h> > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&intc>; > + > + clocks { > + xo_board: xo-board-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + }; > + > + cpus: cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { Lowercase labels please. I am in process of fixing it everywhere. > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x0>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + L2_0: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + cache-unified; > + next-level-cache = <&L3_0>; > + L3_0: l3-cache { > + compatible = "cache"; > + cache-level = <3>; > + cache-unified; > + }; > + }; > + }; > + > + CPU1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + enable-method = "psci"; > + reg = <0x100>; > + next-level-cache = <&L2_100>; > + L2_100: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + cache-unified; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU2: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + enable-method = "psci"; > + reg = <0x200>; > + next-level-cache = <&L2_200>; > + L2_200: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + cache-unified; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU3: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + enable-method = "psci"; > + reg = <0x300>; > + next-level-cache = <&L2_300>; > + L2_300: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + cache-unified; > + next-level-cache = <&L3_0>; > + }; > + }; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + /* We expect the bootloader to fill in the size */ > + reg = <0x0 0x80000000 0x0 0x0>; > + }; > + > + pmu { pmu-a55 > + compatible = "arm,cortex-a55-pmu"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + pmu-v7 { pmu-a7 but... where is the A7 CPU? > + compatible = "arm,cortex-a7-pmu"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; Same interrupts? Huh? > + }; > + > + dsu-pmu { pmu-dsu? > + compatible = "arm,dsu-pmu"; > + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; > + cpus = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>; > + status = "okay"; Drop > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + tz@8a600000 { > + reg = <0x0 0x8a600000 0x0 0x200000>; > + no-map; > + }; > + }; > + > + soc@0 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0 0 0 0 0x10 0>; > + > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq5424-tlmm"; > + reg = <0 0x01000000 0 0x300000>; > + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 0 50>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + uart1_pins: uart1-state { > + pins = "gpio43", "gpio44"; > + function = "uart1"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + }; > + > + gcc: clock-controller@1800000 { > + compatible = "qcom,ipq5424-gcc"; > + reg = <0 0x01800000 0 0x40000>; > + clocks = <&xo_board>, > + <&sleep_clk>, > + <0>, > + <0>, > + <0>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #interconnect-cells = <1>; > + }; > + > + qupv3: geniqup@1ac0000 { > + compatible = "qcom,geni-se-qup"; > + reg = <0 0x01ac0000 0 0x2000>; > + clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>, > + <&gcc GCC_QUPV3_AHB_SLV_CLK>; > + clock-names = "m-ahb", "s-ahb"; > + ranges; > + #address-cells = <2>; > + #size-cells = <2>; > + > + status = "okay"; Please do not upstream your downstream code... > + > + uart1: serial@1a84000 { > + compatible = "qcom,geni-debug-uart"; > + reg = <0 0x01a84000 0 0x4000>; > + clocks = <&gcc GCC_QUPV3_UART1_CLK>; > + clock-names = "se"; > + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; > + status = "okay"; Work on upstream instead. > + }; > + }; > + Best regards, Krzysztof
On 13/09/2024 14:52, Dmitry Baryshkov wrote: > On Fri, Sep 13, 2024 at 05:42:49PM GMT, Sricharan R wrote: >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&intc>; >> + >> + clocks { >> + xo_board: xo-board-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; > > I think Krzysztof lately suggested moving these clocks to board DT > files. > The node can stay. Just the frequency goes to DTSI. See also DTS coding style document. Best regards, Krzysztof
On 9/19/2024 6:01 PM, Krzysztof Kozlowski wrote: > On 13/09/2024 14:52, Dmitry Baryshkov wrote: >> On Fri, Sep 13, 2024 at 05:42:49PM GMT, Sricharan R wrote: > >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + interrupt-parent = <&intc>; >>> + >>> + clocks { >>> + xo_board: xo-board-clk { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + sleep_clk: sleep-clk { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + }; >> >> I think Krzysztof lately suggested moving these clocks to board DT >> files. >> > > The node can stay. Just the frequency goes to DTSI. See also DTS coding > style document. ok, will check Regards, Sricharan
On 9/19/2024 6:00 PM, Krzysztof Kozlowski wrote: [..] >> + >> diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi >> new file mode 100644 >> index 000000000000..b6c08fac9482 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi >> @@ -0,0 +1,294 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * IPQ5424 device tree source >> + * >> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >> + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,ipq5424-gcc.h> >> +#include <dt-bindings/reset/qcom,ipq5424-gcc.h> >> +#include <dt-bindings/gpio/gpio.h> >> + >> +/ { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&intc>; >> + >> + clocks { >> + xo_board: xo-board-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; >> + }; >> + >> + cpus: cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + CPU0: cpu@0 { > > Lowercase labels please. > > I am in process of fixing it everywhere. > ok >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + reg = <0x0>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + L2_0: l2-cache { >> + compatible = "cache"; >> + cache-level = <2>; >> + cache-unified; >> + next-level-cache = <&L3_0>; >> + L3_0: l3-cache { >> + compatible = "cache"; >> + cache-level = <3>; >> + cache-unified; >> + }; >> + }; >> + }; >> + >> + CPU1: cpu@100 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + enable-method = "psci"; >> + reg = <0x100>; >> + next-level-cache = <&L2_100>; >> + L2_100: l2-cache { >> + compatible = "cache"; >> + cache-level = <2>; >> + cache-unified; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU2: cpu@200 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + enable-method = "psci"; >> + reg = <0x200>; >> + next-level-cache = <&L2_200>; >> + L2_200: l2-cache { >> + compatible = "cache"; >> + cache-level = <2>; >> + cache-unified; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU3: cpu@300 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + enable-method = "psci"; >> + reg = <0x300>; >> + next-level-cache = <&L2_300>; >> + L2_300: l2-cache { >> + compatible = "cache"; >> + cache-level = <2>; >> + cache-unified; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + }; >> + >> + memory@80000000 { >> + device_type = "memory"; >> + /* We expect the bootloader to fill in the size */ >> + reg = <0x0 0x80000000 0x0 0x0>; >> + }; >> + >> + pmu { > > pmu-a55 > ok >> + compatible = "arm,cortex-a55-pmu"; >> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; >> + }; >> + >> + pmu-v7 { > > pmu-a7 but... where is the A7 CPU? > oops, by mistake. Renamed to a55 above, but missed deleting here. >> + compatible = "arm,cortex-a7-pmu"; >> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > > Same interrupts? Huh? > will be removed. >> + }; >> + >> + dsu-pmu { > > pmu-dsu? > ok >> + compatible = "arm,dsu-pmu"; >> + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; >> + cpus = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>; >> + status = "okay"; > > Drop > ok >> + }; >> + >> + psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; >> + >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + tz@8a600000 { >> + reg = <0x0 0x8a600000 0x0 0x200000>; >> + no-map; >> + }; >> + }; >> + >> + soc@0 { >> + compatible = "simple-bus"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges = <0 0 0 0 0x10 0>; >> + >> + tlmm: pinctrl@1000000 { >> + compatible = "qcom,ipq5424-tlmm"; >> + reg = <0 0x01000000 0 0x300000>; >> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + gpio-ranges = <&tlmm 0 0 50>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + uart1_pins: uart1-state { >> + pins = "gpio43", "gpio44"; >> + function = "uart1"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + }; >> + >> + gcc: clock-controller@1800000 { >> + compatible = "qcom,ipq5424-gcc"; >> + reg = <0 0x01800000 0 0x40000>; >> + clocks = <&xo_board>, >> + <&sleep_clk>, >> + <0>, >> + <0>, >> + <0>; >> + #clock-cells = <1>; >> + #reset-cells = <1>; >> + #interconnect-cells = <1>; >> + }; >> + >> + qupv3: geniqup@1ac0000 { >> + compatible = "qcom,geni-se-qup"; >> + reg = <0 0x01ac0000 0 0x2000>; >> + clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>, >> + <&gcc GCC_QUPV3_AHB_SLV_CLK>; >> + clock-names = "m-ahb", "s-ahb"; >> + ranges; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + status = "okay"; > > Please do not upstream your downstream code... > Sure, will remove here and below place Regards, Sricharan >> + >> + uart1: serial@1a84000 { >> + compatible = "qcom,geni-debug-uart"; >> + reg = <0 0x01a84000 0 0x4000>; >> + clocks = <&gcc GCC_QUPV3_UART1_CLK>; >> + clock-names = "se"; >> + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; >> + status = "okay"; > > Work on upstream instead. > >> + }; >> + }; >> + > > > Best regards, > Krzysztof >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 197ab325c0b9..46c4eb758799 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5424-rdp466.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts new file mode 100644 index 000000000000..c8597a9ba175 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * IPQ5018 MP03.1-C2 board device tree source + * + * Copyright (c) 2023 The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5424.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5424 RDP466"; + compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi new file mode 100644 index 000000000000..b6c08fac9482 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ5424 device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,ipq5424-gcc.h> +#include <dt-bindings/reset/qcom,ipq5424-gcc.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + clocks { + xo_board: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x100>; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x200>; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x300>; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pmu-v7 { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + dsu-pmu { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + cpus = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>; + status = "okay"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz@8a600000 { + reg = <0x0 0x8a600000 0x0 0x200000>; + no-map; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5424-tlmm"; + reg = <0 0x01000000 0 0x300000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 50>; + interrupt-controller; + #interrupt-cells = <2>; + + uart1_pins: uart1-state { + pins = "gpio43", "gpio44"; + function = "uart1"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq5424-gcc"; + reg = <0 0x01800000 0 0x40000>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; + + qupv3: geniqup@1ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x01ac0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>, + <&gcc GCC_QUPV3_AHB_SLV_CLK>; + clock-names = "m-ahb", "s-ahb"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + status = "okay"; + + uart1: serial@1a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x01a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_UART1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0 0xf200000 0 0x10000>, /* GICD */ + <0 0xf240000 0 0x80000>; /* GICR * 4 regions */ + #interrupt-cells = <0x3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + mbi-ranges = <672 128>; + msi-controller; + }; + + sdhc: mmc@7804000 { + compatible = "qcom,ipq5424-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x07804000 0 0x1000>, <0 0x07805000 0 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + status = "disabled"; + }; + + timer@f420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0xf420000 0 0x1000>; + ranges = <0 0 0 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@f421000 { + reg = <0xf421000 0x1000>, + <0xf422000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@f423000 { + reg = <0xf423000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@f425000 { + reg = <0xf425000 0x1000>, + <0xf426000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@f427000 { + reg = <0xf427000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@f429000 { + reg = <0xf429000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@f42b000 { + reg = <0xf42b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@f42d000 { + reg = <0xf42d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +};