Message ID | 20240920080227.711691-1-Delphine_CC_Chiu@wiwynn.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting for TPM | expand |
On Fri, 2024-09-20 at 16:02 +0800, Delphine CC Chiu wrote: > From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > > Enable spi-gpio setting for TPM device in yosemite4. > Thanks, I've applied this to be picked up through the BMC tree. Andrew
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index 98477792aa00..869aa8b3f411 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -34,6 +34,24 @@ iio-hwmon { <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, <&adc1 0>, <&adc1 1>; }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <33000000>; + }; + }; }; &uart1 {