@@ -156,7 +156,7 @@
#define AST_EP_DMA_DESC_PID_DATA1 (2 << 14)
#define AST_EP_DMA_DESC_PID_MDATA (3 << 14)
#define EP_DESC1_IN_LEN(x) ((x) & 0x1fff)
-#define AST_EP_DMA_DESC_MAX_LEN (7680) /* Max packet length for trasmit in 1 desc */
+#define AST_EP_DMA_DESC_MAX_LEN (7680) /* Max packet length for transmit in 1 desc */
struct ast_udc_request {
struct usb_request req;
@@ -80,7 +80,7 @@ module_param_named(num, mod_data.num, uint, S_IRUGO);
MODULE_PARM_DESC(num, "number of emulated controllers");
/*-------------------------------------------------------------------------*/
-/* gadget side driver data structres */
+/* gadget side driver data structures */
struct dummy_ep {
struct list_head queue;
unsigned long last_io; /* jiffies timestamp */
@@ -511,7 +511,7 @@ static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num)
out_8(&epparam->tbmr, rtfcr);
tmp = (u16)(ep->ep.maxpacket + USB_CRC_SIZE);
- /* MRBLR must be divisble by 4 */
+ /* MRBLR must be divisible by 4 */
tmp = (u16)(((tmp >> 2) << 2) + 4);
out_be16(&epparam->mrblr, tmp);
@@ -1413,7 +1413,7 @@ static int ep_txframe_handle(struct qe_ep *ep)
return 0;
}
-/* confirm the already trainsmited bd */
+/* confirm the already transmitted bd */
static int qe_ep_txconf(struct qe_ep *ep)
{
struct qe_bd __iomem *bd;
@@ -2196,7 +2196,7 @@ static int tx_irq(struct qe_udc *udc)
}
-/* setup packect's rx is handle in the function too */
+/* setup packet's rx is handle in the function too */
static void rx_irq(struct qe_udc *udc)
{
struct qe_ep *ep;
@@ -1297,7 +1297,7 @@ static void init_controller(struct fusb300 *fusb300)
reg |= val;
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR);
- /*set u1 u2 timmer*/
+ /*set u1 u2 timer*/
fusb300_set_u2_timeout(fusb300, 0xff);
fusb300_set_u1_timeout(fusb300, 0xff);
@@ -2097,7 +2097,7 @@ static irqreturn_t net2272_irq(int irq, void *_dev)
}
/* check dma interrupts */
#endif
- /* Platform/devcice interrupt handler */
+ /* Platform/device interrupt handler */
#if !defined(PLX_PCI_RDK)
net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1));
net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0));
@@ -2482,7 +2482,7 @@ static int usbf_handle_ep0_setup(struct usbf_ep *ep0)
ep0->delayed_status = 0;
if ((crq.ctrlreq.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
- /* This is not a USB standard request -> delelate */
+ /* This is not a USB standard request -> delegate */
goto delegate;
}
@@ -2707,7 +2707,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev)
/* write fifo */
udc_txfifo_write(ep, &req->req);
- /* lengh bytes transferred */
+ /* length bytes transferred */
len = req->req.length - req->req.actual;
if (len > ep->ep.maxpacket)
len = ep->ep.maxpacket;
Correctly spelled comments make it easier for the reader to understand the code. Fix typos: 'trasmit' -> 'transmit', 'structres' -> 'structures', 'divisble' -> 'divisible', 'trainsmited' -> 'transmitted', 'packect's' -> 'packet's', 'timmer' -> 'timer', 'devcice' -> 'device', 'delelate' -> 'delegate', 'lengh' -> 'length'. Signed-off-by: Yan Zhen <yanzhen@vivo.com> --- drivers/usb/gadget/udc/aspeed_udc.c | 2 +- drivers/usb/gadget/udc/dummy_hcd.c | 2 +- drivers/usb/gadget/udc/fsl_qe_udc.c | 6 +++--- drivers/usb/gadget/udc/fusb300_udc.c | 2 +- drivers/usb/gadget/udc/net2272.c | 2 +- drivers/usb/gadget/udc/renesas_usbf.c | 2 +- drivers/usb/gadget/udc/snps_udc_core.c | 2 +- 7 files changed, 9 insertions(+), 9 deletions(-)