@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/soc/ti/ti-msgmgr.h>
#include <linux/soc/ti/ti_sci_protocol.h>
+#include <linux/suspend.h>
#include <linux/sys_soc.h>
#include <linux/reboot.h>
@@ -1654,6 +1655,68 @@ static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle,
return ret;
}
+/**
+ * ti_sci_cmd_prepare_sleep() - Prepare system for system suspend
+ * @handle: pointer to TI SCI handle
+ * @mode: Device identifier
+ * @ctx_lo: Low part of address for context save
+ * @ctx_hi: High part of address for context save
+ * @debug_flags: Debug flags to pass to firmware
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_prepare_sleep(const struct ti_sci_handle *handle, u8 mode,
+ u32 ctx_lo, u32 ctx_hi, u32 debug_flags)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_prepare_sleep *req;
+ struct ti_sci_msg_hdr *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PREPARE_SLEEP,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+
+ req = (struct ti_sci_msg_req_prepare_sleep *)xfer->xfer_buf;
+ req->mode = mode;
+ req->ctx_lo = ctx_lo;
+ req->ctx_hi = ctx_hi;
+ req->debug_flags = debug_flags;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+ if (!ti_sci_is_response_ack(resp)) {
+ dev_err(dev, "Failed to prepare sleep\n");
+ ret = -ENODEV;
+ }
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
/**
* ti_sci_msg_cmd_query_fw_caps() - Get the FW/SoC capabilities
* @handle: Pointer to TI SCI handle
@@ -1715,6 +1778,61 @@ static int ti_sci_msg_cmd_query_fw_caps(const struct ti_sci_handle *handle,
return ret;
}
+/**
+ * ti_sci_cmd_set_io_isolation() - Enable IO isolation in LPM
+ * @handle: Pointer to TI SCI handle
+ * @state: The desired state of the IO isolation
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_set_io_isolation(const struct ti_sci_handle *handle,
+ u8 state)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_set_io_isolation *req;
+ struct ti_sci_msg_hdr *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_IO_ISOLATION,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_set_io_isolation *)xfer->xfer_buf;
+ req->state = state;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+ if (!ti_sci_is_response_ack(resp)) {
+ dev_err(dev, "Failed to set IO isolation\n");
+ ret = -ENODEV;
+ }
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
{
struct ti_sci_info *info;
@@ -3326,6 +3444,81 @@ static int tisci_reboot_handler(struct sys_off_data *data)
return NOTIFY_BAD;
}
+static int ti_sci_prepare_system_suspend(struct ti_sci_info *info)
+{
+ /*
+ * Map and validate the target Linux suspend state to TISCI LPM.
+ * Default is to let Device Manager select the low power mode.
+ */
+ switch (pm_suspend_target_state) {
+ case PM_SUSPEND_MEM:
+ if (info->fw_caps & MSG_FLAG_CAPS_LPM_DM_MANAGED) {
+ /*
+ * For the DM_MANAGED mode the context is reserved for
+ * internal use and can be 0
+ */
+ return ti_sci_cmd_prepare_sleep(&info->handle,
+ TISCI_MSG_VALUE_SLEEP_MODE_DM_MANAGED,
+ 0, 0, 0);
+ } else {
+ /* DM Managed is not supported by the firmware. */
+ dev_err(info->dev, "Suspend to memory is not supported by the firmware\n");
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ /*
+ * Do not fail if we don't have action to take for a
+ * specific suspend mode.
+ */
+ return 0;
+ }
+}
+
+static int __maybe_unused ti_sci_suspend(struct device *dev)
+{
+ struct ti_sci_info *info = dev_get_drvdata(dev);
+ int ret;
+
+ ret = ti_sci_prepare_system_suspend(info);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int __maybe_unused ti_sci_suspend_noirq(struct device *dev)
+{
+ struct ti_sci_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = ti_sci_cmd_set_io_isolation(&info->handle, TISCI_MSG_VALUE_IO_ENABLE);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int __maybe_unused ti_sci_resume_noirq(struct device *dev)
+{
+ struct ti_sci_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = ti_sci_cmd_set_io_isolation(&info->handle, TISCI_MSG_VALUE_IO_DISABLE);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct dev_pm_ops ti_sci_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ti_sci_suspend,
+ .suspend_noirq = ti_sci_suspend_noirq,
+ .resume_noirq = ti_sci_resume_noirq,
+#endif
+};
+
/* Description for K2G */
static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = {
.default_host_id = 2,
@@ -3494,6 +3687,7 @@ static struct platform_driver ti_sci_driver = {
.name = "ti-sci",
.of_match_table = of_match_ptr(ti_sci_of_match),
.suppress_bind_attrs = true,
+ .pm = &ti_sci_pm_ops,
},
};
module_platform_driver(ti_sci_driver);
@@ -6,7 +6,7 @@
* The system works in a message response protocol
* See: https://software-dl.ti.com/tisci/esd/latest/index.html for details
*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2015-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef __TI_SCI_H
@@ -36,6 +36,10 @@
#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d
#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e
+/* Low Power Mode Requests */
+#define TI_SCI_MSG_PREPARE_SLEEP 0x0300
+#define TI_SCI_MSG_SET_IO_ISOLATION 0x0307
+
/* Resource Management Requests */
#define TI_SCI_MSG_GET_RESOURCE_RANGE 0x1500
@@ -567,6 +571,45 @@ struct ti_sci_msg_resp_get_clock_freq {
u64 freq_hz;
} __packed;
+/**
+ * struct tisci_msg_req_prepare_sleep - Request for TISCI_MSG_PREPARE_SLEEP.
+ *
+ * @hdr TISCI header to provide ACK/NAK flags to the host.
+ * @mode Low power mode to enter.
+ * @ctx_lo Low 32-bits of physical pointer to address to use for context save.
+ * @ctx_hi High 32-bits of physical pointer to address to use for context save.
+ * @debug_flags Flags that can be set to halt the sequence during suspend or
+ * resume to allow JTAG connection and debug.
+ *
+ * This message is used as the first step of entering a low power mode. It
+ * allows configurable information, including which state to enter to be
+ * easily shared from the application, as this is a non-secure message and
+ * therefore can be sent by anyone.
+ */
+struct ti_sci_msg_req_prepare_sleep {
+ struct ti_sci_msg_hdr hdr;
+
+#define TISCI_MSG_VALUE_SLEEP_MODE_DM_MANAGED 0xfd
+ u8 mode;
+ u32 ctx_lo;
+ u32 ctx_hi;
+ u32 debug_flags;
+} __packed;
+
+/**
+ * struct tisci_msg_set_io_isolation_req - Request for TI_SCI_MSG_SET_IO_ISOLATION.
+ *
+ * @hdr: Generic header
+ * @state: The deseared state of the IO isolation.
+ *
+ * This message is used to enable/disable IO isolation for low power modes.
+ * Response is generic ACK / NACK message.
+ */
+struct ti_sci_msg_req_set_io_isolation {
+ struct ti_sci_msg_hdr hdr;
+ u8 state;
+} __packed;
+
#define TI_SCI_IRQ_SECONDARY_HOST_INVALID 0xff
/**
@@ -195,6 +195,10 @@ struct ti_sci_clk_ops {
u64 *current_freq);
};
+/* TISCI LPM IO isolation control values */
+#define TISCI_MSG_VALUE_IO_ENABLE 1
+#define TISCI_MSG_VALUE_IO_DISABLE 0
+
/**
* struct ti_sci_resource_desc - Description of TI SCI resource instance range.
* @start: Start index of the first resource range.