| Message ID | 20241008071540.32607-1-macpaul.lin@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] arm64: dts: mediatek: mt8195: Fix dtbs_check error for tphy | expand |
Il 08/10/24 09:15, Macpaul Lin ha scritto: > The u3phy1 node in mt8195.dtsi was triggering a dtbs_check error. > The error message was: > t-phy@11e30000: 'power-domains' does not match any of the regexes: > '^(usb|pcie|sata)-phy@[0-9a-f]+$', 'pinctrl-[0-9]+' > Fix this issue by dropping 'power-domains' of u3phy1 node. > > This is because MediaTek tphy dose not need to add mtcmos. It is not > necessary to add 'power-domains'. If the power of the tphy is turned off, > it will affect other functions. From the current USB hardware design > perspective, even if mtcmos is added to the phy, it is always on. > > Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board") > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 - > 1 file changed, 1 deletion(-) > > Changes for v2: > - Add detail description of the tphy design for explaining the reason > of this change. > > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi > index ade685ed2190..1c6f08dde31c 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi > @@ -1920,7 +1920,6 @@ u3phy1: t-phy@11e30000 { > #address-cells = <1>; > #size-cells = <1>; > ranges = <0 0 0x11e30000 0xe00>; > - power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; > status = "disabled"; > > u2port1: usb-phy@0 {
On 10/8/24 17:09, AngeloGioacchino Del Regno wrote: > Il 08/10/24 09:15, Macpaul Lin ha scritto: >> The u3phy1 node in mt8195.dtsi was triggering a dtbs_check error. >> The error message was: >> t-phy@11e30000: 'power-domains' does not match any of the regexes: >> '^(usb|pcie|sata)-phy@[0-9a-f]+$', 'pinctrl-[0-9]+' >> Fix this issue by dropping 'power-domains' of u3phy1 node. >> >> This is because MediaTek tphy dose not need to add mtcmos. It is not >> necessary to add 'power-domains'. If the power of the tphy is turned off, >> it will affect other functions. From the current USB hardware design >> perspective, even if mtcmos is added to the phy, it is always on. >> >> Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and >> evaluation board") >> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > > Reviewed-by: AngeloGioacchino Del Regno > <angelogioacchino.delregno@collabora.com> Sorry for bothering, it seems MediaTek internal still have some discussion about according to Conor's suggestion: [1] https://lore.kernel.org/lkml/20241008-disorder-slacking-d8196ceb68f7@spud/T/#mccf978d76f52cc26970f3f3be6120055e4698fe6 Please don't to pick this patch until if MediaTek could have some conclusions. >> --- >> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 - >> 1 file changed, 1 deletion(-) >> >> Changes for v2: >> - Add detail description of the tphy design for explaining the reason >> of this change. >> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi >> b/arch/arm64/boot/dts/mediatek/mt8195.dtsi >> index ade685ed2190..1c6f08dde31c 100644 >> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi >> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi >> @@ -1920,7 +1920,6 @@ u3phy1: t-phy@11e30000 { >> #address-cells = <1>; >> #size-cells = <1>; >> ranges = <0 0 0x11e30000 0xe00>; >> - power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; >> status = "disabled"; >> u2port1: usb-phy@0 { > > Thanks! Macpaul Lin
On 10/9/24 17:21, Macpaul Lin wrote: > > > On 10/8/24 17:09, AngeloGioacchino Del Regno wrote: >> Il 08/10/24 09:15, Macpaul Lin ha scritto: >>> The u3phy1 node in mt8195.dtsi was triggering a dtbs_check error. >>> The error message was: >>> t-phy@11e30000: 'power-domains' does not match any of the regexes: >>> '^(usb|pcie|sata)-phy@[0-9a-f]+$', 'pinctrl-[0-9]+' >>> Fix this issue by dropping 'power-domains' of u3phy1 node. >>> >>> This is because MediaTek tphy dose not need to add mtcmos. It is not >>> necessary to add 'power-domains'. If the power of the tphy is turned >>> off, >>> it will affect other functions. From the current USB hardware design >>> perspective, even if mtcmos is added to the phy, it is always on. >>> >>> Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and >>> evaluation board") >>> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> >> >> Reviewed-by: AngeloGioacchino Del Regno >> <angelogioacchino.delregno@collabora.com> > > Sorry for bothering, it seems MediaTek internal still have some > discussion about according to Conor's suggestion: > > [1] > https://lore.kernel.org/lkml/20241008-disorder-slacking-d8196ceb68f7@spud/T/#mccf978d76f52cc26970f3f3be6120055e4698fe6 > > > Please don't to pick this patch until if MediaTek could have some > conclusions. Update: This patch could be dropped since the correct fix in TPHY's DT Schema has been accepted. [2] https://lore.kernel.org/all/172917936283.288841.9548294790735623997.b4-ty@kernel.org/ >>> --- >>> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 - >>> 1 file changed, 1 deletion(-) >>> >>> Changes for v2: >>> - Add detail description of the tphy design for explaining the reason >>> of this change. >>> >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi >>> b/arch/arm64/boot/dts/mediatek/mt8195.dtsi >>> index ade685ed2190..1c6f08dde31c 100644 >>> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi >>> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi >>> @@ -1920,7 +1920,6 @@ u3phy1: t-phy@11e30000 { >>> #address-cells = <1>; >>> #size-cells = <1>; >>> ranges = <0 0 0x11e30000 0xe00>; >>> - power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; >>> status = "disabled"; >>> u2port1: usb-phy@0 { >> >> > > Thanks! > Macpaul Lin Thanks! Macpaul Lin
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index ade685ed2190..1c6f08dde31c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1920,7 +1920,6 @@ u3phy1: t-phy@11e30000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0x11e30000 0xe00>; - power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; status = "disabled"; u2port1: usb-phy@0 {
The u3phy1 node in mt8195.dtsi was triggering a dtbs_check error. The error message was: t-phy@11e30000: 'power-domains' does not match any of the regexes: '^(usb|pcie|sata)-phy@[0-9a-f]+$', 'pinctrl-[0-9]+' Fix this issue by dropping 'power-domains' of u3phy1 node. This is because MediaTek tphy dose not need to add mtcmos. It is not necessary to add 'power-domains'. If the power of the tphy is turned off, it will affect other functions. From the current USB hardware design perspective, even if mtcmos is added to the phy, it is always on. Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 - 1 file changed, 1 deletion(-) Changes for v2: - Add detail description of the tphy design for explaining the reason of this change.