diff mbox series

[v7,4/7] gpio: aspeed: Remove the name for bank array

Message ID 20241008081450.1490955-5-billy_tsai@aspeedtech.com (mailing list archive)
State New, archived
Headers show
Series Add Aspeed G7 gpio support | expand

Commit Message

Billy Tsai Oct. 8, 2024, 8:14 a.m. UTC 
The bank array name is only used to determine if the GPIO offset is valid,
and this condition can be replaced by checking if the offset exceeds the
ngpio property.

Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/gpio/gpio-aspeed.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index c49c55ae962b..61a531962de3 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -77,7 +77,6 @@  struct aspeed_gpio_bank {
 	uint16_t	debounce_regs;
 	uint16_t	tolerance_regs;
 	uint16_t	cmdsrc_regs;
-	const char	names[4][3];
 };
 
 /*
@@ -104,7 +103,6 @@  static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.debounce_regs = 0x0040,
 		.tolerance_regs = 0x001c,
 		.cmdsrc_regs = 0x0060,
-		.names = { "A", "B", "C", "D" },
 	},
 	{
 		.val_regs = 0x0020,
@@ -113,7 +111,6 @@  static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.debounce_regs = 0x0048,
 		.tolerance_regs = 0x003c,
 		.cmdsrc_regs = 0x0068,
-		.names = { "E", "F", "G", "H" },
 	},
 	{
 		.val_regs = 0x0070,
@@ -122,7 +119,6 @@  static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.debounce_regs = 0x00b0,
 		.tolerance_regs = 0x00ac,
 		.cmdsrc_regs = 0x0090,
-		.names = { "I", "J", "K", "L" },
 	},
 	{
 		.val_regs = 0x0078,
@@ -131,7 +127,6 @@  static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.debounce_regs = 0x0100,
 		.tolerance_regs = 0x00fc,
 		.cmdsrc_regs = 0x00e0,
-		.names = { "M", "N", "O", "P" },
 	},
 	{
 		.val_regs = 0x0080,
@@ -140,7 +135,6 @@  static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.debounce_regs = 0x0130,
 		.tolerance_regs = 0x012c,
 		.cmdsrc_regs = 0x0110,
-		.names = { "Q", "R", "S", "T" },
 	},
 	{
 		.val_regs = 0x0088,
@@ -149,7 +143,6 @@  static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.debounce_regs = 0x0160,
 		.tolerance_regs = 0x015c,
 		.cmdsrc_regs = 0x0140,
-		.names = { "U", "V", "W", "X" },
 	},
 	{
 		.val_regs = 0x01E0,
@@ -158,7 +151,6 @@  static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.debounce_regs = 0x0190,
 		.tolerance_regs = 0x018c,
 		.cmdsrc_regs = 0x0170,
-		.names = { "Y", "Z", "AA", "AB" },
 	},
 	{
 		.val_regs = 0x01e8,
@@ -167,7 +159,6 @@  static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.debounce_regs = 0x01c0,
 		.tolerance_regs = 0x01bc,
 		.cmdsrc_regs = 0x01a0,
-		.names = { "AC", "", "", "" },
 	},
 };
 
@@ -280,11 +271,11 @@  static inline const struct aspeed_bank_props *find_bank_props(
 static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset)
 {
 	const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
-	const struct aspeed_gpio_bank *bank = to_bank(offset);
-	unsigned int group = GPIO_OFFSET(offset) / 8;
 
-	return bank->names[group][0] != '\0' &&
-		(!props || ((props->input | props->output) & GPIO_BIT(offset)));
+	if (offset >= gpio->chip.ngpio)
+		return false;
+
+	return (!props || ((props->input | props->output) & GPIO_BIT(offset)));
 }
 
 static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)