diff mbox series

[v2,6/9] ARM: dts: bcm6846: Add ARM PL081 DMA block

Message ID 20241016-genexis-xg6846b-base-v2-6-6a7cc2ee57eb@linaro.org (mailing list archive)
State New, archived
Headers show
Series ARM: dts: Add some BCM6846 device tree | expand

Commit Message

Linus Walleij Oct. 16, 2024, 6:41 a.m. UTC 
The ARM PL081 DMA controller can be found in the BCM6846
memory map, and it turns out to work.

The block may be used as DMA engine for some of the
peripherals (maybe the EMMC controller found in the same
group of peripherals?) but it can always be used as a
memcpy engine, which is a generic "blitter".

I tested it with the dmatest module, and it copies
lots of data very fast and fires hundreds of thousands
of interrupts so it works just fine.

Add it to the BCM6846 DTSI file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/broadcom/bcm6846.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
index 371c16af27f3..131e1802bd86 100644
--- a/arch/arm/boot/dts/broadcom/bcm6846.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
@@ -240,5 +240,18 @@  mdio: mdio@2060 {
 			#address-cells = <0>;
 			status = "disabled";
 		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };