new file mode 100644
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed AST2700 Interrupt Controller
+
+description:
+ This interrupt controller hardware is second level interrupt controller that
+ is hooked to a parent interrupt controller. It's useful to combine multiple
+ interrupt sources into 1 interrupt to parent interrupt controller.
+
+maintainers:
+ - Kevin Chen <kevin_chen@aspeedtech.com>
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2700-intc-ic
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell is the IRQ number, the second cell is the trigger
+ type as defined in interrupt.txt in this directory.
+
+ interrupts:
+ maxItems: 6
+ description: |
+ Depend to which INTC0 or INTC1 used.
+ INTC0 and INTC1 are two kinds of interrupt controller with enable and raw
+ status registers for use.
+ INTC0 is used to assert GIC if interrupt in INTC1 asserted.
+ INTC1 is used to assert INTC0 if interrupt of modules asserted.
+ +-----+ +-------+ +---------+---module0
+ | GIC |---| INTC0 |--+--| INTC1_0 |---module2
+ | | | | | | |---...
+ +-----+ +-------+ | +---------+---module31
+ |
+ | +---------+---module0
+ +---| INTC1_1 |---module2
+ | | |---...
+ | +---------+---module31
+ ...
+ | +---------+---module0
+ +---| INTC1_5 |---module2
+ | |---...
+ +---------+---module31
+
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-controller@12101b00 {
+ compatible = "aspeed,ast2700-intc-ic";
+ reg = <0 0x12101b00 0 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
The ASPEED AST27XX interrupt controller(INTC) contains second level and third level interrupt controller. INTC0: The second level INTC, which used to assert GIC if interrupt in INTC1 asserted. INTC1_x: The third level INTC, which used to assert INTC0 if interrupt in modules of INTC asserted. The relationship is like the following: +-----+ +-------+ +---------+---module0 | GIC |---| INTC0 |--+--| INTC1_0 |---module1 | | | | | | |---... +-----+ +-------+ | +---------+---module31 | | +---------+---module0 +---| INTC1_1 |---module1 | | |---... | +---------+---module31 ... | +---------+---module0 +---| INTC1_5 |---module1 | |---... +---------+---module31 Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com> --- .../aspeed,ast2700-intc.yaml | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml