diff mbox series

[3/5] arm64: dts: ti: k3-j7200: Add PCIe ctrl node to scm_conf region

Message ID 20241016233044.240699-4-afd@ti.com (mailing list archive)
State New, archived
Headers show
Series Use ti,j784s4-pcie-ctrl for PCIe CTRL spaces | expand

Commit Message

Andrew Davis Oct. 16, 2024, 11:30 p.m. UTC 
This region is used for controlling the function of the PCIe IP. It is
compatible with "ti,j784s4-pcie-ctrl", add this here and use it with
the PCIe node.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 9386bf3ef9f68..45091aa0fb1b0 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -32,6 +32,11 @@  scm_conf: scm-conf@100000 {
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
+		pcie1_ctrl: pcie-ctrl@4074 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4074 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x4080 0x20>;
@@ -745,7 +750,7 @@  pcie1_rc: pcie@2910000 {
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <4>;
 		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;