| Message ID | 20241017094222.1014936-8-wenst@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | platform/chrome: Introduce DT hardware prober | expand |
Hi, On Thu, Oct 17, 2024 at 2:42 AM Chen-Yu Tsai <wenst@chromium.org> wrote: > > Instead of having them all available, mark them all as "fail-needs-probe" > and have the implementation try to probe which one is present. > > Also remove the shared resource workaround by moving the pinctrl entry > for the trackpad interrupt line back into the individual trackpad nodes. It could be worth noting in the description that it's a really bad idea to pick this patch if you don't also have the patch ("platform/chrome: Introduce device tree hardware prober"). > @@ -35,6 +37,7 @@ touchscreen@40 { > hid-descr-addr = <0x0001>; > interrupt-parent = <&pio>; > interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + status = "fail-needs-probe"; It's a little weird that there's no pinctrl definition for the touchscreens but there is one for the trackpad, but that predates your patch and is unlikely to be a big deal. > }; > }; > > @@ -47,6 +50,8 @@ &i2c4 { > trackpad2: trackpad@2c { > compatible = "hid-over-i2c"; > interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&trackpad_irq>; > reg = <0x2c>; I should have noticed before, but officially the order above is slightly off. According to: https://docs.kernel.org/devicetree/bindings/dts-coding-style.html The "reg" property should be higher (right after compatible). It's not a new problem with your patch but since you're inserting a new property you might as well match the new dts style. In any case, nothing is a huge deal. Reviewed-by: Douglas Anderson <dianders@chromium.org>
On Fri, Oct 18, 2024 at 5:16 AM Doug Anderson <dianders@chromium.org> wrote: > > Hi, > > On Thu, Oct 17, 2024 at 2:42 AM Chen-Yu Tsai <wenst@chromium.org> wrote: > > > > Instead of having them all available, mark them all as "fail-needs-probe" > > and have the implementation try to probe which one is present. > > > > Also remove the shared resource workaround by moving the pinctrl entry > > for the trackpad interrupt line back into the individual trackpad nodes. > > It could be worth noting in the description that it's a really bad > idea to pick this patch if you don't also have the patch > ("platform/chrome: Introduce device tree hardware prober"). I found that there's a stable tag one can add to reject AUTOSEL. Sounds like the perfect thing to add here. > > @@ -35,6 +37,7 @@ touchscreen@40 { > > hid-descr-addr = <0x0001>; > > interrupt-parent = <&pio>; > > interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + status = "fail-needs-probe"; > > It's a little weird that there's no pinctrl definition for the > touchscreens but there is one for the trackpad, but that predates your > patch and is unlikely to be a big deal. To be honest I'm in favor of getting rid of pinctrl settings that do nothing more than mux in a GPIO, as mentioned in my talk at ELCE. Such settings are already implied by the interrupts or gpios properties. The fact that the OS doesn't enforce exclusiveness between the subsystems is not something the DT should deal with. > > }; > > }; > > > > @@ -47,6 +50,8 @@ &i2c4 { > > trackpad2: trackpad@2c { > > compatible = "hid-over-i2c"; > > interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&trackpad_irq>; > > reg = <0x2c>; > > I should have noticed before, but officially the order above is > slightly off. According to: > > https://docs.kernel.org/devicetree/bindings/dts-coding-style.html > > The "reg" property should be higher (right after compatible). It's not > a new problem with your patch but since you're inserting a new > property you might as well match the new dts style. The entry in mt8173-elm.dtsi is also in the wrong order. I think I'll do a patch later on to just fix it up if it's a major eyesore. Angelo what do you think? > In any case, nothing is a huge deal. > > Reviewed-by: Douglas Anderson <dianders@chromium.org> Thanks! ChenYu
Hi, On Mon, Oct 28, 2024 at 2:14 AM Chen-Yu Tsai <wenst@chromium.org> wrote: > > > > @@ -35,6 +37,7 @@ touchscreen@40 { > > > hid-descr-addr = <0x0001>; > > > interrupt-parent = <&pio>; > > > interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > > + status = "fail-needs-probe"; > > > > It's a little weird that there's no pinctrl definition for the > > touchscreens but there is one for the trackpad, but that predates your > > patch and is unlikely to be a big deal. > > To be honest I'm in favor of getting rid of pinctrl settings that > do nothing more than mux in a GPIO, as mentioned in my talk at ELCE. > Such settings are already implied by the interrupts or gpios properties. > The fact that the OS doesn't enforce exclusiveness between the > subsystems is not something the DT should deal with. One could also argue that the fact that the Linux kernel happens to auto-mux pins to GPIO is not something that the device tree should assume. Personally I have never liked the "auto-mux" behavior of Linux and I've found that it can get in the way when you need to do more advanced pinmuxing, like when a driver needs to sometimes use a pin in "special function" mode and sometimes in GPIO mode. The auto-muxing happens behind the back of the driver which then needs to account for this fact and work around it. Just sayin. :-P
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi index e03474702cad..d9abd68da369 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi @@ -14,6 +14,7 @@ touchscreen2: touchscreen@34 { compatible = "melfas,mip4_ts"; reg = <0x34>; interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; + status = "fail-needs-probe"; }; /* @@ -26,6 +27,7 @@ touchscreen3: touchscreen@20 { reg = <0x20>; hid-descr-addr = <0x0020>; interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; + status = "fail-needs-probe"; }; /* Lenovo Ideapad C330 uses G2Touch touchscreen as a 2nd source touchscreen */ @@ -35,6 +37,7 @@ touchscreen@40 { hid-descr-addr = <0x0001>; interrupt-parent = <&pio>; interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + status = "fail-needs-probe"; }; }; @@ -47,6 +50,8 @@ &i2c4 { trackpad2: trackpad@2c { compatible = "hid-over-i2c"; interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; reg = <0x2c>; hid-descr-addr = <0x0020>; /* @@ -56,6 +61,7 @@ trackpad2: trackpad@2c { /* post-power-on-delay-ms = <100>; */ vdd-supply = <&mt6397_vgp6_reg>; wakeup-source; + status = "fail-needs-probe"; }; }; @@ -80,3 +86,11 @@ pins_wp { }; }; }; + +&touchscreen { + status = "fail-needs-probe"; +}; + +&trackpad { + status = "fail-needs-probe"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index b4d85147b77b..eee64461421f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -358,12 +358,12 @@ touchscreen: touchscreen@10 { &i2c4 { clock-frequency = <400000>; status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&trackpad_irq>; trackpad: trackpad@15 { compatible = "elan,ekth3000"; interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; reg = <0x15>; vcc-supply = <&mt6397_vgp6_reg>; wakeup-source;
Instead of having them all available, mark them all as "fail-needs-probe" and have the implementation try to probe which one is present. Also remove the shared resource workaround by moving the pinctrl entry for the trackpad interrupt line back into the individual trackpad nodes. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> --- Changes since v7: - Mark touchscreen@40 as "fail-needs-probe" as well Changes since v6: none Changes since v5: none Changes since v4: - Rebased Changes since v3: - Also remove second source workaround, i.e. move the interrupt line pinctrl entry from the i2c node back to the components. Changes since v2: - Drop class from status --- arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi | 14 ++++++++++++++ arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 ++-- 2 files changed, 16 insertions(+), 2 deletions(-)