Message ID | 20241019084738.3370489-11-claudiu.beznea.uj@bp.renesas.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add RTC support for the Renesas RZ/G3S SoC | expand |
Hi Claudiu, On Sat, Oct 19, 2024 at 10:48 AM Claudiu <claudiu.beznea@tuxon.dev> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Enable the VBATTB controller. It provides the clock for RTC. > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > --- > > Changes in v4: > - added assigned-clocks, assigned-clock-parents properties > - set vbattb_xtal status = "okay" > - collected tags Thanks for the update! > --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi > +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi > @@ -346,6 +347,18 @@ mux { > }; > }; > > +&vbattb { > + assigned-clocks = <&vbattb VBATTB_MUX>; > + assigned-clock-parents = <&vbattb VBATTB_XC>; > + quartz-load-femtofarads = <12500>; > + status = "okay"; > +}; > + > +&vbattb_xtal { > + clock-frequency = <32768>; > + status = "okay"; With status not disabled in r9a08g045.dtsi, this line should not be needed. > +}; > + > &wdt0 { > timeout-sec = <60>; > status = "okay"; Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index 21bfa4e03972..6be0ffdcb87e 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2023 Renesas Electronics Corp. */ +#include <dt-bindings/clock/renesas,r9a08g045-vbattb.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> @@ -346,6 +347,18 @@ mux { }; }; +&vbattb { + assigned-clocks = <&vbattb VBATTB_MUX>; + assigned-clock-parents = <&vbattb VBATTB_XC>; + quartz-load-femtofarads = <12500>; + status = "okay"; +}; + +&vbattb_xtal { + clock-frequency = <32768>; + status = "okay"; +}; + &wdt0 { timeout-sec = <60>; status = "okay";