| Message ID | 20241020083124.174724-3-ryan@testtoast.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ASoC: add Allwinner H616 audio codec support | expand |
On Sun, 20 Oct 2024 21:30:52 +1300, Ryan Walklin wrote: > The H616 has an audio codec compatible with the sun4i-a10 driver. > > The codec is relatively cut down compared to some of the other Allwinner > SoCs and only has a single line-out route (relying on a separate digital > microphone IP block for input). HDMI and SPDIF audio are handled > separately by an audio hub IP block, which is not currently implemented > in mainline kernels. This requires some additional flexibility in the > DMA bindings. > > Add compatible string and routing for the H616 audio codec, and update > the required DMA descriptions. > > Signed-off-by: Ryan Walklin <ryan@testtoast.com> > > --- > Changelog v1..v2: > - Remove PLL_AUDIO_4X clock from definition (defined internally but > not used by driver and so not required in DTSI) > - Restrict TX-only DMA definition to H616 > --- > .../sound/allwinner,sun4i-a10-codec.yaml | 53 ++++++++++++++++--- > 1 file changed, 47 insertions(+), 6 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml:239:5: [error] duplication of key "if" in mapping (key-duplicates) ./Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml:245:5: [error] duplication of key "then" in mapping (key-duplicates) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml: ignoring, error parsing file ./Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml:239:5: found duplicate key "if" with value "{}" (original value: "{}") make[2]: *** Deleting file 'Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.example.dts' Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml:239:5: found duplicate key "if" with value "{}" (original value: "{}") make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.example.dts] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1442: dt_binding_check] Error 2 make: *** [Makefile:224: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241020083124.174724-3-ryan@testtoast.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index 78273647f7665..db4fde5122686 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -22,6 +22,7 @@ properties: - allwinner,sun8i-a23-codec - allwinner,sun8i-h3-codec - allwinner,sun8i-v3s-codec + - allwinner,sun50i-h616-codec reg: maxItems: 1 @@ -40,14 +41,20 @@ properties: - const: codec dmas: - items: - - description: RX DMA Channel - - description: TX DMA Channel + oneOf: + - items: + - description: RX DMA Channel + - description: TX DMA Channel + - items: + - description: TX DMA Channel dma-names: - items: - - const: rx - - const: tx + oneOf: + - items: + - const: rx + - const: tx + - items: + - const: tx resets: maxItems: 1 @@ -229,6 +236,40 @@ allOf: - Mic - Speaker + if: + properties: + compatible: + enum: + - allwinner,sun50i-h616-codec + + then: + properties: + allwinner,audio-routing: + items: + enum: + - LINEOUT + - Line Out + + dmas: + items: + - description: TX DMA Channel + + dma-names: + items: + - const: tx + + else: + properties: + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + unevaluatedProperties: false examples:
The H616 has an audio codec compatible with the sun4i-a10 driver. The codec is relatively cut down compared to some of the other Allwinner SoCs and only has a single line-out route (relying on a separate digital microphone IP block for input). HDMI and SPDIF audio are handled separately by an audio hub IP block, which is not currently implemented in mainline kernels. This requires some additional flexibility in the DMA bindings. Add compatible string and routing for the H616 audio codec, and update the required DMA descriptions. Signed-off-by: Ryan Walklin <ryan@testtoast.com> --- Changelog v1..v2: - Remove PLL_AUDIO_4X clock from definition (defined internally but not used by driver and so not required in DTSI) - Restrict TX-only DMA definition to H616 --- .../sound/allwinner,sun4i-a10-codec.yaml | 53 ++++++++++++++++--- 1 file changed, 47 insertions(+), 6 deletions(-)