| Message ID | 20241022155920.17511-1-adrian.hunter@intel.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
On 22/10/24 18:59, Adrian Hunter wrote: > Hi > > Note for V14: > KVM patches dropped. ping > > Note for V12: > There was a small conflict between the Intel PT changes in > "KVM: x86: Fix Intel PT Host/Guest mode when host tracing" and the > changes in this patch set, so I have put the patch sets together, > along with outstanding fix "perf/x86/intel/pt: Fix buffer full but > size is 0 case" > > Cover letter for KVM changes (patches 2 to 4): > > There is a long-standing problem whereby running Intel PT on host and guest > in Host/Guest mode, causes VM-Entry failure. > > The motivation for this patch set is to provide a fix for stable kernels > prior to the advent of the "Mediated Passthrough vPMU" patch set: > > https://lore.kernel.org/kvm/20240801045907.4010984-1-mizhang@google.com/ > > which would render a large part of the fix unnecessary but likely not be > suitable for backport to stable due to its size and complexity. > > Ideally, this patch set would be applied before "Mediated Passthrough vPMU" > > Note that the fix does not conflict with "Mediated Passthrough vPMU", it > is just that "Mediated Passthrough vPMU" will make the code to stop and > restart Intel PT unnecessary. > > Note for V11: > Moving aux_paused into a union within struct hw_perf_event caused > a regression because aux_paused was being written unconditionally > even though it is valid only for AUX (e.g. Intel PT) PMUs. > That is fixed in V11. > > Hardware traces, such as instruction traces, can produce a vast amount of > trace data, so being able to reduce tracing to more specific circumstances > can be useful. > > The ability to pause or resume tracing when another event happens, can do > that. > > These patches add such a facilty and show how it would work for Intel > Processor Trace. > > Maintainers of other AUX area tracing implementations are requested to > consider if this is something they might employ and then whether or not > the ABI would work for them. Note, thank you to James Clark (ARM) for > evaluating the API for Coresight. Suzuki K Poulose (ARM) also responded > positively to the RFC. > > Changes to perf tools are now (since V4) fleshed out. > > Please note, Intel® Architecture Instruction Set Extensions and Future > Features Programming Reference March 2024 319433-052, currently: > > https://cdrdv2.intel.com/v1/dl/getContent/671368 > > introduces hardware pause / resume for Intel PT in a feature named > Intel PT Trigger Tracing. > > For that more fields in perf_event_attr will be necessary. The main > differences are: > - it can be applied not just to overflows, but optionally to > every event > - a packet is emitted into the trace, optionally with IP > information > - no PMI > - works with PMC and DR (breakpoint) events only > > Here are the proposed additions to perf_event_attr, please comment: > > diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h > index 0c557f0a17b3..05dcc43f11bb 100644 > --- a/tools/include/uapi/linux/perf_event.h > +++ b/tools/include/uapi/linux/perf_event.h > @@ -369,6 +369,22 @@ enum perf_event_read_format { > PERF_FORMAT_MAX = 1U << 5, /* non-ABI */ > }; > > +enum { > + PERF_AUX_ACTION_START_PAUSED = 1U << 0, > + PERF_AUX_ACTION_PAUSE = 1U << 1, > + PERF_AUX_ACTION_RESUME = 1U << 2, > + PERF_AUX_ACTION_EMIT = 1U << 3, > + PERF_AUX_ACTION_NR = 0x1f << 4, > + PERF_AUX_ACTION_NO_IP = 1U << 9, > + PERF_AUX_ACTION_PAUSE_ON_EVT = 1U << 10, > + PERF_AUX_ACTION_RESUME_ON_EVT = 1U << 11, > + PERF_AUX_ACTION_EMIT_ON_EVT = 1U << 12, > + PERF_AUX_ACTION_NR_ON_EVT = 0x1f << 13, > + PERF_AUX_ACTION_NO_IP_ON_EVT = 1U << 18, > + PERF_AUX_ACTION_MASK = ~PERF_AUX_ACTION_START_PAUSED, > + PERF_AUX_PAUSE_RESUME_MASK = PERF_AUX_ACTION_PAUSE | PERF_AUX_ACTION_RESUME, > +}; > + > #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ > #define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ > #define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ > @@ -515,10 +531,19 @@ struct perf_event_attr { > union { > __u32 aux_action; > struct { > - __u32 aux_start_paused : 1, /* start AUX area tracing paused */ > - aux_pause : 1, /* on overflow, pause AUX area tracing */ > - aux_resume : 1, /* on overflow, resume AUX area tracing */ > - __reserved_3 : 29; > + __u32 aux_start_paused : 1, /* start AUX area tracing paused */ > + aux_pause : 1, /* on overflow, pause AUX area tracing */ > + aux_resume : 1, /* on overflow, resume AUX area tracing */ > + aux_emit : 1, /* generate AUX records instead of events */ > + aux_nr : 5, /* AUX area tracing reference number */ > + aux_no_ip : 1, /* suppress IP in AUX records */ > + /* Following apply to event occurrence not overflows */ > + aux_pause_on_evt : 1, /* on event, pause AUX area tracing */ > + aux_resume_on_evt : 1, /* on event, resume AUX area tracing */ > + aux_emit_on_evt : 1, /* generate AUX records instead of events */ > + aux_nr_on_evt : 5, /* AUX area tracing reference number */ > + aux_no_ip_on_evt : 1, /* suppress IP in AUX records */ > + __reserved_3 : 13; > }; > }; > > > Changes in V14: > Dropped KVM patches > > perf/x86/intel/pt: Add support for pause / resume > Set pt->handle_nmi after configuration is completed instead of during > > Changes in V13: > perf/core: Add aux_pause, aux_resume, aux_start_paused > Do aux_resume at the end of __perf_event_overflow() so as to trace > less of perf itself > > perf tools: Add missing_features for aux_start_paused, aux_pause, aux_resume > Add error message also in EOPNOTSUPP case (Leo) > > Changes in V12: > Add previously sent patch "perf/x86/intel/pt: Fix buffer full > but size is 0 case" > > Add previously sent patch set "KVM: x86: Fix Intel PT Host/Guest > mode when host tracing" > > Rebase on current tip plus patch set "KVM: x86: Fix Intel PT Host/Guest > mode when host tracing" > > Changes in V11: > perf/core: Add aux_pause, aux_resume, aux_start_paused > Make assignment to event->hw.aux_paused conditional on > (pmu->capabilities & PERF_PMU_CAP_AUX_PAUSE). > > perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling > Remove definition of has_aux_action() because it has > already been added as an inline function. > > perf/x86/intel/pt: Fix sampling synchronization > perf tools: Enable evsel__is_aux_event() to work for ARM/ARM64 > perf tools: Enable evsel__is_aux_event() to work for S390_CPUMSF > Dropped because they have already been applied > > Changes in V10: > perf/core: Add aux_pause, aux_resume, aux_start_paused > Move aux_paused into a union within struct hw_perf_event. > Additional comment wrt PERF_EF_PAUSE/PERF_EF_RESUME. > Factor out has_aux_action() as an inline function. > Use scoped_guard for irqsave. > Move calls of perf_event_aux_pause() from __perf_event_output() > to __perf_event_overflow(). > > Changes in V9: > perf/x86/intel/pt: Fix sampling synchronization > New patch > > perf/core: Add aux_pause, aux_resume, aux_start_paused > Move aux_paused to struct hw_perf_event > > perf/x86/intel/pt: Add support for pause / resume > Add more comments and barriers for resume_allowed and > pause_allowed > Always use WRITE_ONCE with resume_allowed > > > Changes in V8: > > perf tools: Parse aux-action > Fix clang warning: > util/auxtrace.c:821:7: error: missing field 'aux_action' initializer [-Werror,-Wmissing-field-initializers] > 821 | {NULL}, > | ^ > > Changes in V7: > > Add Andi's Reviewed-by for patches 2-12 > Re-base > > Changes in V6: > > perf/core: Add aux_pause, aux_resume, aux_start_paused > Removed READ/WRITE_ONCE from __perf_event_aux_pause() > Expanded comment about guarding against NMI > > Changes in V5: > > perf/core: Add aux_pause, aux_resume, aux_start_paused > Added James' Ack > > perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling > New patch > > perf tools > Added Ian's Ack > > Changes in V4: > > perf/core: Add aux_pause, aux_resume, aux_start_paused > Rename aux_output_cfg -> aux_action > Reorder aux_action bits from: > aux_pause, aux_resume, aux_start_paused > to: > aux_start_paused, aux_pause, aux_resume > Fix aux_action bits __u64 -> __u32 > > coresight: Have a stab at support for pause / resume > Dropped > > perf tools > All new patches > > Changes in RFC V3: > > coresight: Have a stab at support for pause / resume > 'mode' -> 'flags' so it at least compiles > > Changes in RFC V2: > > Use ->stop() / ->start() instead of ->pause_resume() > Move aux_start_paused bit into aux_output_cfg > Tighten up when Intel PT pause / resume is allowed > Add an example of how it might work for CoreSight > > > Adrian Hunter (11): > perf/x86/intel/pt: Fix buffer full but size is 0 case > perf/core: Add aux_pause, aux_resume, aux_start_paused > perf/x86/intel/pt: Add support for pause / resume > perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling > perf tools: Add aux_start_paused, aux_pause and aux_resume > perf tools: Add aux-action config term > perf tools: Parse aux-action > perf tools: Add missing_features for aux_start_paused, aux_pause, aux_resume > perf intel-pt: Improve man page format > perf intel-pt: Add documentation for pause / resume > perf intel-pt: Add a test for pause / resume > > arch/x86/events/intel/core.c | 4 +- > arch/x86/events/intel/pt.c | 84 +++- > arch/x86/events/intel/pt.h | 6 + > include/linux/perf_event.h | 28 ++ > include/uapi/linux/perf_event.h | 11 +- > kernel/events/core.c | 75 +++- > kernel/events/internal.h | 1 + > tools/include/uapi/linux/perf_event.h | 11 +- > tools/perf/Documentation/perf-intel-pt.txt | 596 ++++++++++++++++++----------- > tools/perf/Documentation/perf-record.txt | 4 + > tools/perf/builtin-record.c | 4 +- > tools/perf/tests/shell/test_intel_pt.sh | 28 ++ > tools/perf/util/auxtrace.c | 67 +++- > tools/perf/util/auxtrace.h | 6 +- > tools/perf/util/evsel.c | 15 + > tools/perf/util/evsel.h | 1 + > tools/perf/util/evsel_config.h | 1 + > tools/perf/util/parse-events.c | 10 + > tools/perf/util/parse-events.h | 1 + > tools/perf/util/parse-events.l | 1 + > tools/perf/util/perf_event_attr_fprintf.c | 3 + > tools/perf/util/pmu.c | 1 + > 22 files changed, 716 insertions(+), 242 deletions(-) > > > Regards > Adrian
On 30/10/24 15:16, Adrian Hunter wrote: > On 22/10/24 18:59, Adrian Hunter wrote: >> Hi >> >> Note for V14: >> KVM patches dropped. > > ping ping > >> >> Note for V12: >> There was a small conflict between the Intel PT changes in >> "KVM: x86: Fix Intel PT Host/Guest mode when host tracing" and the >> changes in this patch set, so I have put the patch sets together, >> along with outstanding fix "perf/x86/intel/pt: Fix buffer full but >> size is 0 case" >> >> Cover letter for KVM changes (patches 2 to 4): >> >> There is a long-standing problem whereby running Intel PT on host and guest >> in Host/Guest mode, causes VM-Entry failure. >> >> The motivation for this patch set is to provide a fix for stable kernels >> prior to the advent of the "Mediated Passthrough vPMU" patch set: >> >> https://lore.kernel.org/kvm/20240801045907.4010984-1-mizhang@google.com/ >> >> which would render a large part of the fix unnecessary but likely not be >> suitable for backport to stable due to its size and complexity. >> >> Ideally, this patch set would be applied before "Mediated Passthrough vPMU" >> >> Note that the fix does not conflict with "Mediated Passthrough vPMU", it >> is just that "Mediated Passthrough vPMU" will make the code to stop and >> restart Intel PT unnecessary. >> >> Note for V11: >> Moving aux_paused into a union within struct hw_perf_event caused >> a regression because aux_paused was being written unconditionally >> even though it is valid only for AUX (e.g. Intel PT) PMUs. >> That is fixed in V11. >> >> Hardware traces, such as instruction traces, can produce a vast amount of >> trace data, so being able to reduce tracing to more specific circumstances >> can be useful. >> >> The ability to pause or resume tracing when another event happens, can do >> that. >> >> These patches add such a facilty and show how it would work for Intel >> Processor Trace. >> >> Maintainers of other AUX area tracing implementations are requested to >> consider if this is something they might employ and then whether or not >> the ABI would work for them. Note, thank you to James Clark (ARM) for >> evaluating the API for Coresight. Suzuki K Poulose (ARM) also responded >> positively to the RFC. >> >> Changes to perf tools are now (since V4) fleshed out. >> >> Please note, Intel® Architecture Instruction Set Extensions and Future >> Features Programming Reference March 2024 319433-052, currently: >> >> https://cdrdv2.intel.com/v1/dl/getContent/671368 >> >> introduces hardware pause / resume for Intel PT in a feature named >> Intel PT Trigger Tracing. >> >> For that more fields in perf_event_attr will be necessary. The main >> differences are: >> - it can be applied not just to overflows, but optionally to >> every event >> - a packet is emitted into the trace, optionally with IP >> information >> - no PMI >> - works with PMC and DR (breakpoint) events only >> >> Here are the proposed additions to perf_event_attr, please comment: >> >> diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h >> index 0c557f0a17b3..05dcc43f11bb 100644 >> --- a/tools/include/uapi/linux/perf_event.h >> +++ b/tools/include/uapi/linux/perf_event.h >> @@ -369,6 +369,22 @@ enum perf_event_read_format { >> PERF_FORMAT_MAX = 1U << 5, /* non-ABI */ >> }; >> >> +enum { >> + PERF_AUX_ACTION_START_PAUSED = 1U << 0, >> + PERF_AUX_ACTION_PAUSE = 1U << 1, >> + PERF_AUX_ACTION_RESUME = 1U << 2, >> + PERF_AUX_ACTION_EMIT = 1U << 3, >> + PERF_AUX_ACTION_NR = 0x1f << 4, >> + PERF_AUX_ACTION_NO_IP = 1U << 9, >> + PERF_AUX_ACTION_PAUSE_ON_EVT = 1U << 10, >> + PERF_AUX_ACTION_RESUME_ON_EVT = 1U << 11, >> + PERF_AUX_ACTION_EMIT_ON_EVT = 1U << 12, >> + PERF_AUX_ACTION_NR_ON_EVT = 0x1f << 13, >> + PERF_AUX_ACTION_NO_IP_ON_EVT = 1U << 18, >> + PERF_AUX_ACTION_MASK = ~PERF_AUX_ACTION_START_PAUSED, >> + PERF_AUX_PAUSE_RESUME_MASK = PERF_AUX_ACTION_PAUSE | PERF_AUX_ACTION_RESUME, >> +}; >> + >> #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ >> #define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ >> #define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ >> @@ -515,10 +531,19 @@ struct perf_event_attr { >> union { >> __u32 aux_action; >> struct { >> - __u32 aux_start_paused : 1, /* start AUX area tracing paused */ >> - aux_pause : 1, /* on overflow, pause AUX area tracing */ >> - aux_resume : 1, /* on overflow, resume AUX area tracing */ >> - __reserved_3 : 29; >> + __u32 aux_start_paused : 1, /* start AUX area tracing paused */ >> + aux_pause : 1, /* on overflow, pause AUX area tracing */ >> + aux_resume : 1, /* on overflow, resume AUX area tracing */ >> + aux_emit : 1, /* generate AUX records instead of events */ >> + aux_nr : 5, /* AUX area tracing reference number */ >> + aux_no_ip : 1, /* suppress IP in AUX records */ >> + /* Following apply to event occurrence not overflows */ >> + aux_pause_on_evt : 1, /* on event, pause AUX area tracing */ >> + aux_resume_on_evt : 1, /* on event, resume AUX area tracing */ >> + aux_emit_on_evt : 1, /* generate AUX records instead of events */ >> + aux_nr_on_evt : 5, /* AUX area tracing reference number */ >> + aux_no_ip_on_evt : 1, /* suppress IP in AUX records */ >> + __reserved_3 : 13; >> }; >> }; >> >> >> Changes in V14: >> Dropped KVM patches >> >> perf/x86/intel/pt: Add support for pause / resume >> Set pt->handle_nmi after configuration is completed instead of during >> >> Changes in V13: >> perf/core: Add aux_pause, aux_resume, aux_start_paused >> Do aux_resume at the end of __perf_event_overflow() so as to trace >> less of perf itself >> >> perf tools: Add missing_features for aux_start_paused, aux_pause, aux_resume >> Add error message also in EOPNOTSUPP case (Leo) >> >> Changes in V12: >> Add previously sent patch "perf/x86/intel/pt: Fix buffer full >> but size is 0 case" >> >> Add previously sent patch set "KVM: x86: Fix Intel PT Host/Guest >> mode when host tracing" >> >> Rebase on current tip plus patch set "KVM: x86: Fix Intel PT Host/Guest >> mode when host tracing" >> >> Changes in V11: >> perf/core: Add aux_pause, aux_resume, aux_start_paused >> Make assignment to event->hw.aux_paused conditional on >> (pmu->capabilities & PERF_PMU_CAP_AUX_PAUSE). >> >> perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling >> Remove definition of has_aux_action() because it has >> already been added as an inline function. >> >> perf/x86/intel/pt: Fix sampling synchronization >> perf tools: Enable evsel__is_aux_event() to work for ARM/ARM64 >> perf tools: Enable evsel__is_aux_event() to work for S390_CPUMSF >> Dropped because they have already been applied >> >> Changes in V10: >> perf/core: Add aux_pause, aux_resume, aux_start_paused >> Move aux_paused into a union within struct hw_perf_event. >> Additional comment wrt PERF_EF_PAUSE/PERF_EF_RESUME. >> Factor out has_aux_action() as an inline function. >> Use scoped_guard for irqsave. >> Move calls of perf_event_aux_pause() from __perf_event_output() >> to __perf_event_overflow(). >> >> Changes in V9: >> perf/x86/intel/pt: Fix sampling synchronization >> New patch >> >> perf/core: Add aux_pause, aux_resume, aux_start_paused >> Move aux_paused to struct hw_perf_event >> >> perf/x86/intel/pt: Add support for pause / resume >> Add more comments and barriers for resume_allowed and >> pause_allowed >> Always use WRITE_ONCE with resume_allowed >> >> >> Changes in V8: >> >> perf tools: Parse aux-action >> Fix clang warning: >> util/auxtrace.c:821:7: error: missing field 'aux_action' initializer [-Werror,-Wmissing-field-initializers] >> 821 | {NULL}, >> | ^ >> >> Changes in V7: >> >> Add Andi's Reviewed-by for patches 2-12 >> Re-base >> >> Changes in V6: >> >> perf/core: Add aux_pause, aux_resume, aux_start_paused >> Removed READ/WRITE_ONCE from __perf_event_aux_pause() >> Expanded comment about guarding against NMI >> >> Changes in V5: >> >> perf/core: Add aux_pause, aux_resume, aux_start_paused >> Added James' Ack >> >> perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling >> New patch >> >> perf tools >> Added Ian's Ack >> >> Changes in V4: >> >> perf/core: Add aux_pause, aux_resume, aux_start_paused >> Rename aux_output_cfg -> aux_action >> Reorder aux_action bits from: >> aux_pause, aux_resume, aux_start_paused >> to: >> aux_start_paused, aux_pause, aux_resume >> Fix aux_action bits __u64 -> __u32 >> >> coresight: Have a stab at support for pause / resume >> Dropped >> >> perf tools >> All new patches >> >> Changes in RFC V3: >> >> coresight: Have a stab at support for pause / resume >> 'mode' -> 'flags' so it at least compiles >> >> Changes in RFC V2: >> >> Use ->stop() / ->start() instead of ->pause_resume() >> Move aux_start_paused bit into aux_output_cfg >> Tighten up when Intel PT pause / resume is allowed >> Add an example of how it might work for CoreSight >> >> >> Adrian Hunter (11): >> perf/x86/intel/pt: Fix buffer full but size is 0 case >> perf/core: Add aux_pause, aux_resume, aux_start_paused >> perf/x86/intel/pt: Add support for pause / resume >> perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling >> perf tools: Add aux_start_paused, aux_pause and aux_resume >> perf tools: Add aux-action config term >> perf tools: Parse aux-action >> perf tools: Add missing_features for aux_start_paused, aux_pause, aux_resume >> perf intel-pt: Improve man page format >> perf intel-pt: Add documentation for pause / resume >> perf intel-pt: Add a test for pause / resume >> >> arch/x86/events/intel/core.c | 4 +- >> arch/x86/events/intel/pt.c | 84 +++- >> arch/x86/events/intel/pt.h | 6 + >> include/linux/perf_event.h | 28 ++ >> include/uapi/linux/perf_event.h | 11 +- >> kernel/events/core.c | 75 +++- >> kernel/events/internal.h | 1 + >> tools/include/uapi/linux/perf_event.h | 11 +- >> tools/perf/Documentation/perf-intel-pt.txt | 596 ++++++++++++++++++----------- >> tools/perf/Documentation/perf-record.txt | 4 + >> tools/perf/builtin-record.c | 4 +- >> tools/perf/tests/shell/test_intel_pt.sh | 28 ++ >> tools/perf/util/auxtrace.c | 67 +++- >> tools/perf/util/auxtrace.h | 6 +- >> tools/perf/util/evsel.c | 15 + >> tools/perf/util/evsel.h | 1 + >> tools/perf/util/evsel_config.h | 1 + >> tools/perf/util/parse-events.c | 10 + >> tools/perf/util/parse-events.h | 1 + >> tools/perf/util/parse-events.l | 1 + >> tools/perf/util/perf_event_attr_fprintf.c | 3 + >> tools/perf/util/pmu.c | 1 + >> 22 files changed, 716 insertions(+), 242 deletions(-) >> >> >> Regards >> Adrian >
diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h index 0c557f0a17b3..05dcc43f11bb 100644 --- a/tools/include/uapi/linux/perf_event.h +++ b/tools/include/uapi/linux/perf_event.h @@ -369,6 +369,22 @@ enum perf_event_read_format { PERF_FORMAT_MAX = 1U << 5, /* non-ABI */ }; +enum { + PERF_AUX_ACTION_START_PAUSED = 1U << 0, + PERF_AUX_ACTION_PAUSE = 1U << 1, + PERF_AUX_ACTION_RESUME = 1U << 2, + PERF_AUX_ACTION_EMIT = 1U << 3, + PERF_AUX_ACTION_NR = 0x1f << 4, + PERF_AUX_ACTION_NO_IP = 1U << 9, + PERF_AUX_ACTION_PAUSE_ON_EVT = 1U << 10, + PERF_AUX_ACTION_RESUME_ON_EVT = 1U << 11, + PERF_AUX_ACTION_EMIT_ON_EVT = 1U << 12, + PERF_AUX_ACTION_NR_ON_EVT = 0x1f << 13, + PERF_AUX_ACTION_NO_IP_ON_EVT = 1U << 18, + PERF_AUX_ACTION_MASK = ~PERF_AUX_ACTION_START_PAUSED, + PERF_AUX_PAUSE_RESUME_MASK = PERF_AUX_ACTION_PAUSE | PERF_AUX_ACTION_RESUME, +}; + #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ #define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ #define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ @@ -515,10 +531,19 @@ struct perf_event_attr { union { __u32 aux_action; struct { - __u32 aux_start_paused : 1, /* start AUX area tracing paused */ - aux_pause : 1, /* on overflow, pause AUX area tracing */ - aux_resume : 1, /* on overflow, resume AUX area tracing */ - __reserved_3 : 29; + __u32 aux_start_paused : 1, /* start AUX area tracing paused */ + aux_pause : 1, /* on overflow, pause AUX area tracing */ + aux_resume : 1, /* on overflow, resume AUX area tracing */ + aux_emit : 1, /* generate AUX records instead of events */ + aux_nr : 5, /* AUX area tracing reference number */ + aux_no_ip : 1, /* suppress IP in AUX records */ + /* Following apply to event occurrence not overflows */ + aux_pause_on_evt : 1, /* on event, pause AUX area tracing */ + aux_resume_on_evt : 1, /* on event, resume AUX area tracing */ + aux_emit_on_evt : 1, /* generate AUX records instead of events */ + aux_nr_on_evt : 5, /* AUX area tracing reference number */ + aux_no_ip_on_evt : 1, /* suppress IP in AUX records */ + __reserved_3 : 13; }; };
Hi Note for V14: KVM patches dropped. Note for V12: There was a small conflict between the Intel PT changes in "KVM: x86: Fix Intel PT Host/Guest mode when host tracing" and the changes in this patch set, so I have put the patch sets together, along with outstanding fix "perf/x86/intel/pt: Fix buffer full but size is 0 case" Cover letter for KVM changes (patches 2 to 4): There is a long-standing problem whereby running Intel PT on host and guest in Host/Guest mode, causes VM-Entry failure. The motivation for this patch set is to provide a fix for stable kernels prior to the advent of the "Mediated Passthrough vPMU" patch set: https://lore.kernel.org/kvm/20240801045907.4010984-1-mizhang@google.com/ which would render a large part of the fix unnecessary but likely not be suitable for backport to stable due to its size and complexity. Ideally, this patch set would be applied before "Mediated Passthrough vPMU" Note that the fix does not conflict with "Mediated Passthrough vPMU", it is just that "Mediated Passthrough vPMU" will make the code to stop and restart Intel PT unnecessary. Note for V11: Moving aux_paused into a union within struct hw_perf_event caused a regression because aux_paused was being written unconditionally even though it is valid only for AUX (e.g. Intel PT) PMUs. That is fixed in V11. Hardware traces, such as instruction traces, can produce a vast amount of trace data, so being able to reduce tracing to more specific circumstances can be useful. The ability to pause or resume tracing when another event happens, can do that. These patches add such a facilty and show how it would work for Intel Processor Trace. Maintainers of other AUX area tracing implementations are requested to consider if this is something they might employ and then whether or not the ABI would work for them. Note, thank you to James Clark (ARM) for evaluating the API for Coresight. Suzuki K Poulose (ARM) also responded positively to the RFC. Changes to perf tools are now (since V4) fleshed out. Please note, Intel® Architecture Instruction Set Extensions and Future Features Programming Reference March 2024 319433-052, currently: https://cdrdv2.intel.com/v1/dl/getContent/671368 introduces hardware pause / resume for Intel PT in a feature named Intel PT Trigger Tracing. For that more fields in perf_event_attr will be necessary. The main differences are: - it can be applied not just to overflows, but optionally to every event - a packet is emitted into the trace, optionally with IP information - no PMI - works with PMC and DR (breakpoint) events only Here are the proposed additions to perf_event_attr, please comment: Changes in V14: Dropped KVM patches perf/x86/intel/pt: Add support for pause / resume Set pt->handle_nmi after configuration is completed instead of during Changes in V13: perf/core: Add aux_pause, aux_resume, aux_start_paused Do aux_resume at the end of __perf_event_overflow() so as to trace less of perf itself perf tools: Add missing_features for aux_start_paused, aux_pause, aux_resume Add error message also in EOPNOTSUPP case (Leo) Changes in V12: Add previously sent patch "perf/x86/intel/pt: Fix buffer full but size is 0 case" Add previously sent patch set "KVM: x86: Fix Intel PT Host/Guest mode when host tracing" Rebase on current tip plus patch set "KVM: x86: Fix Intel PT Host/Guest mode when host tracing" Changes in V11: perf/core: Add aux_pause, aux_resume, aux_start_paused Make assignment to event->hw.aux_paused conditional on (pmu->capabilities & PERF_PMU_CAP_AUX_PAUSE). perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling Remove definition of has_aux_action() because it has already been added as an inline function. perf/x86/intel/pt: Fix sampling synchronization perf tools: Enable evsel__is_aux_event() to work for ARM/ARM64 perf tools: Enable evsel__is_aux_event() to work for S390_CPUMSF Dropped because they have already been applied Changes in V10: perf/core: Add aux_pause, aux_resume, aux_start_paused Move aux_paused into a union within struct hw_perf_event. Additional comment wrt PERF_EF_PAUSE/PERF_EF_RESUME. Factor out has_aux_action() as an inline function. Use scoped_guard for irqsave. Move calls of perf_event_aux_pause() from __perf_event_output() to __perf_event_overflow(). Changes in V9: perf/x86/intel/pt: Fix sampling synchronization New patch perf/core: Add aux_pause, aux_resume, aux_start_paused Move aux_paused to struct hw_perf_event perf/x86/intel/pt: Add support for pause / resume Add more comments and barriers for resume_allowed and pause_allowed Always use WRITE_ONCE with resume_allowed Changes in V8: perf tools: Parse aux-action Fix clang warning: util/auxtrace.c:821:7: error: missing field 'aux_action' initializer [-Werror,-Wmissing-field-initializers] 821 | {NULL}, | ^ Changes in V7: Add Andi's Reviewed-by for patches 2-12 Re-base Changes in V6: perf/core: Add aux_pause, aux_resume, aux_start_paused Removed READ/WRITE_ONCE from __perf_event_aux_pause() Expanded comment about guarding against NMI Changes in V5: perf/core: Add aux_pause, aux_resume, aux_start_paused Added James' Ack perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling New patch perf tools Added Ian's Ack Changes in V4: perf/core: Add aux_pause, aux_resume, aux_start_paused Rename aux_output_cfg -> aux_action Reorder aux_action bits from: aux_pause, aux_resume, aux_start_paused to: aux_start_paused, aux_pause, aux_resume Fix aux_action bits __u64 -> __u32 coresight: Have a stab at support for pause / resume Dropped perf tools All new patches Changes in RFC V3: coresight: Have a stab at support for pause / resume 'mode' -> 'flags' so it at least compiles Changes in RFC V2: Use ->stop() / ->start() instead of ->pause_resume() Move aux_start_paused bit into aux_output_cfg Tighten up when Intel PT pause / resume is allowed Add an example of how it might work for CoreSight Adrian Hunter (11): perf/x86/intel/pt: Fix buffer full but size is 0 case perf/core: Add aux_pause, aux_resume, aux_start_paused perf/x86/intel/pt: Add support for pause / resume perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling perf tools: Add aux_start_paused, aux_pause and aux_resume perf tools: Add aux-action config term perf tools: Parse aux-action perf tools: Add missing_features for aux_start_paused, aux_pause, aux_resume perf intel-pt: Improve man page format perf intel-pt: Add documentation for pause / resume perf intel-pt: Add a test for pause / resume arch/x86/events/intel/core.c | 4 +- arch/x86/events/intel/pt.c | 84 +++- arch/x86/events/intel/pt.h | 6 + include/linux/perf_event.h | 28 ++ include/uapi/linux/perf_event.h | 11 +- kernel/events/core.c | 75 +++- kernel/events/internal.h | 1 + tools/include/uapi/linux/perf_event.h | 11 +- tools/perf/Documentation/perf-intel-pt.txt | 596 ++++++++++++++++++----------- tools/perf/Documentation/perf-record.txt | 4 + tools/perf/builtin-record.c | 4 +- tools/perf/tests/shell/test_intel_pt.sh | 28 ++ tools/perf/util/auxtrace.c | 67 +++- tools/perf/util/auxtrace.h | 6 +- tools/perf/util/evsel.c | 15 + tools/perf/util/evsel.h | 1 + tools/perf/util/evsel_config.h | 1 + tools/perf/util/parse-events.c | 10 + tools/perf/util/parse-events.h | 1 + tools/perf/util/parse-events.l | 1 + tools/perf/util/perf_event_attr_fprintf.c | 3 + tools/perf/util/pmu.c | 1 + 22 files changed, 716 insertions(+), 242 deletions(-) Regards Adrian