diff mbox series

[v6,3/3] clk: aspeed: add AST2700 clock driver.

Message ID 20241023090153.1395220-4-ryan_chen@aspeedtech.com (mailing list archive)
State New
Headers show
Series Add support for AST2700 clk driver | expand

Commit Message

Ryan Chen Oct. 23, 2024, 9:01 a.m. UTC
Add AST2700 clock controller driver and also use axiliary
device framework register the reset controller driver.
Due to clock and reset using the same register region.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
 drivers/clk/Kconfig       |    8 +
 drivers/clk/Makefile      |    1 +
 drivers/clk/clk-ast2700.c | 1513 +++++++++++++++++++++++++++++++++++++
 3 files changed, 1522 insertions(+)
 create mode 100644 drivers/clk/clk-ast2700.c

Comments

kernel test robot Oct. 24, 2024, 12:53 p.m. UTC | #1
Hi Ryan,

kernel test robot noticed the following build warnings:

[auto build test WARNING on clk/clk-next]
[also build test WARNING on pza/reset/next lee-mfd/for-mfd-next lee-leds/for-leds-next linus/master lee-mfd/for-mfd-fixes v6.12-rc4 next-20241024]
[cannot apply to pza/imx-drm/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Ryan-Chen/dt-bindings-mfd-aspeed-support-for-AST2700/20241023-170434
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
patch link:    https://lore.kernel.org/r/20241023090153.1395220-4-ryan_chen%40aspeedtech.com
patch subject: [PATCH v6 3/3] clk: aspeed: add AST2700 clock driver.
config: arm64-randconfig-r133-20241024 (https://download.01.org/0day-ci/archive/20241024/202410242017.1valHJUC-lkp@intel.com/config)
compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project 5886454669c3c9026f7f27eab13509dd0241f2d6)
reproduce: (https://download.01.org/0day-ci/archive/20241024/202410242017.1valHJUC-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410242017.1valHJUC-lkp@intel.com/

All warnings (new ones prefixed by >>):

   In file included from drivers/clk/clk-ast2700.c:17:
>> include/soc/aspeed/reset-aspeed.h:14:5: warning: no previous prototype for function 'aspeed_reset_controller_register' [-Wmissing-prototypes]
      14 | int aspeed_reset_controller_register(struct device *clk_dev, void __iomem *base,
         |     ^
   include/soc/aspeed/reset-aspeed.h:14:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
      14 | int aspeed_reset_controller_register(struct device *clk_dev, void __iomem *base,
         | ^
         | static 
   1 warning generated.


vim +/aspeed_reset_controller_register +14 include/soc/aspeed/reset-aspeed.h

1476d29e4461f6 Ryan Chen 2024-10-23   9  
1476d29e4461f6 Ryan Chen 2024-10-23  10  #if IS_ENABLED(CONFIG_RESET_ASPEED)
1476d29e4461f6 Ryan Chen 2024-10-23  11  int aspeed_reset_controller_register(struct device *clk_dev, void __iomem *base,
1476d29e4461f6 Ryan Chen 2024-10-23  12  				     const char *adev_name);
1476d29e4461f6 Ryan Chen 2024-10-23  13  #else
1476d29e4461f6 Ryan Chen 2024-10-23 @14  int aspeed_reset_controller_register(struct device *clk_dev, void __iomem *base,
1476d29e4461f6 Ryan Chen 2024-10-23  15  				     const char *adev_name)
1476d29e4461f6 Ryan Chen 2024-10-23  16  {
1476d29e4461f6 Ryan Chen 2024-10-23  17  	return -ENODEV;
1476d29e4461f6 Ryan Chen 2024-10-23  18  }
1476d29e4461f6 Ryan Chen 2024-10-23  19  #endif /* if IS_ENABLED(CONFIG_RESET_ASPEED) */
1476d29e4461f6 Ryan Chen 2024-10-23  20
kernel test robot Oct. 24, 2024, 8:44 p.m. UTC | #2
Hi Ryan,

kernel test robot noticed the following build warnings:

[auto build test WARNING on clk/clk-next]
[also build test WARNING on pza/reset/next lee-mfd/for-mfd-next lee-leds/for-leds-next linus/master lee-mfd/for-mfd-fixes v6.12-rc4 next-20241024]
[cannot apply to pza/imx-drm/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Ryan-Chen/dt-bindings-mfd-aspeed-support-for-AST2700/20241023-170434
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
patch link:    https://lore.kernel.org/r/20241023090153.1395220-4-ryan_chen%40aspeedtech.com
patch subject: [PATCH v6 3/3] clk: aspeed: add AST2700 clock driver.
config: loongarch-randconfig-r054-20241024 (https://download.01.org/0day-ci/archive/20241025/202410250433.GvMiJrDV-lkp@intel.com/config)
compiler: loongarch64-linux-gcc (GCC) 14.1.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241025/202410250433.GvMiJrDV-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410250433.GvMiJrDV-lkp@intel.com/

All warnings (new ones prefixed by >>):

   In file included from drivers/clk/clk-ast2700.c:17:
>> include/soc/aspeed/reset-aspeed.h:14:5: warning: no previous prototype for 'aspeed_reset_controller_register' [-Wmissing-prototypes]
      14 | int aspeed_reset_controller_register(struct device *clk_dev, void __iomem *base,
         |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +/aspeed_reset_controller_register +14 include/soc/aspeed/reset-aspeed.h

1476d29e4461f6 Ryan Chen 2024-10-23   9  
1476d29e4461f6 Ryan Chen 2024-10-23  10  #if IS_ENABLED(CONFIG_RESET_ASPEED)
1476d29e4461f6 Ryan Chen 2024-10-23  11  int aspeed_reset_controller_register(struct device *clk_dev, void __iomem *base,
1476d29e4461f6 Ryan Chen 2024-10-23  12  				     const char *adev_name);
1476d29e4461f6 Ryan Chen 2024-10-23  13  #else
1476d29e4461f6 Ryan Chen 2024-10-23 @14  int aspeed_reset_controller_register(struct device *clk_dev, void __iomem *base,
1476d29e4461f6 Ryan Chen 2024-10-23  15  				     const char *adev_name)
1476d29e4461f6 Ryan Chen 2024-10-23  16  {
1476d29e4461f6 Ryan Chen 2024-10-23  17  	return -ENODEV;
1476d29e4461f6 Ryan Chen 2024-10-23  18  }
1476d29e4461f6 Ryan Chen 2024-10-23  19  #endif /* if IS_ENABLED(CONFIG_RESET_ASPEED) */
1476d29e4461f6 Ryan Chen 2024-10-23  20
kernel test robot Oct. 25, 2024, 2:56 p.m. UTC | #3
Hi Ryan,

kernel test robot noticed the following build errors:

[auto build test ERROR on clk/clk-next]
[also build test ERROR on pza/reset/next lee-mfd/for-mfd-next lee-leds/for-leds-next linus/master lee-mfd/for-mfd-fixes v6.12-rc4 next-20241025]
[cannot apply to pza/imx-drm/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Ryan-Chen/dt-bindings-mfd-aspeed-support-for-AST2700/20241023-170434
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
patch link:    https://lore.kernel.org/r/20241023090153.1395220-4-ryan_chen%40aspeedtech.com
patch subject: [PATCH v6 3/3] clk: aspeed: add AST2700 clock driver.
config: hexagon-allmodconfig (https://download.01.org/0day-ci/archive/20241025/202410252216.a0X0bOLS-lkp@intel.com/config)
compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project 5886454669c3c9026f7f27eab13509dd0241f2d6)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241025/202410252216.a0X0bOLS-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410252216.a0X0bOLS-lkp@intel.com/

All errors (new ones prefixed by >>):

>> ld.lld: error: undefined symbol: aspeed_reset_controller_register
   >>> referenced by clk-ast2700.c
   >>>               drivers/clk/clk-ast2700.o:(ast2700_soc_clk_probe) in archive vmlinux.a
   >>> referenced by clk-ast2700.c
   >>>               drivers/clk/clk-ast2700.o:(ast2700_soc_clk_probe) in archive vmlinux.a

Kconfig warnings: (for reference only)
   WARNING: unmet direct dependencies detected for MODVERSIONS
   Depends on [n]: MODULES [=y] && !COMPILE_TEST [=y]
   Selected by [y]:
   - RANDSTRUCT_FULL [=y] && (CC_HAS_RANDSTRUCT [=y] || GCC_PLUGINS [=n]) && MODULES [=y]
   WARNING: unmet direct dependencies detected for GET_FREE_REGION
   Depends on [n]: SPARSEMEM [=n]
   Selected by [m]:
   - RESOURCE_KUNIT_TEST [=m] && RUNTIME_TESTING_MENU [=y] && KUNIT [=m]
diff mbox series

Patch

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 983ef4f36d8c..4cc35ecba1c0 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -269,6 +269,14 @@  config COMMON_CLK_ASPEED
 	  The G4 and G5 series, including the ast2400 and ast2500, are supported
 	  by this driver.
 
+config COMMON_CLK_AST2700
+	bool "Clock driver for AST2700 SoC"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	help
+	  This driver provides support for clock on AST2700 SoC.
+	  The driver is responsible for managing the various clocks required
+	  by the peripherals and cores within the AST2700.
+
 config COMMON_CLK_S2MPS11
 	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
 	depends on MFD_SEC_CORE || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f793a16cad40..fe95203c3138 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -38,6 +38,7 @@  obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
 obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_MACH_ASPEED_G6)		+= clk-ast2600.o
+obj-$(CONFIG_COMMON_CLK_AST2700)	+= clk-ast2700.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_K210)		+= clk-k210.o
diff --git a/drivers/clk/clk-ast2700.c b/drivers/clk/clk-ast2700.c
new file mode 100644
index 000000000000..db9ee5031b7c
--- /dev/null
+++ b/drivers/clk/clk-ast2700.c
@@ -0,0 +1,1513 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 ASPEED Technology Inc.
+ * Author: Ryan Chen <ryan_chen@aspeedtech.com>
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/aspeed,ast2700-scu.h>
+#include <soc/aspeed/reset-aspeed.h>
+
+#define SCU_CLK_12MHZ (12 * HZ_PER_MHZ)
+#define SCU_CLK_24MHZ (24 * HZ_PER_MHZ)
+#define SCU_CLK_25MHZ (25 * HZ_PER_MHZ)
+#define SCU_CLK_192MHZ (192 * HZ_PER_MHZ)
+
+/* SOC0 */
+#define SCU0_HWSTRAP1 0x010
+#define SCU0_CLK_STOP 0x240
+#define SCU0_CLK_SEL1 0x280
+#define SCU0_CLK_SEL2 0x284
+#define GET_USB_REFCLK_DIV(x) ((GENMASK(23, 20) & (x)) >> 20)
+#define UART_DIV13_EN BIT(30)
+#define SCU0_HPLL_PARAM 0x300
+#define SCU0_DPLL_PARAM 0x308
+#define SCU0_MPLL_PARAM 0x310
+#define SCU0_D0CLK_PARAM 0x320
+#define SCU0_D1CLK_PARAM 0x330
+#define SCU0_CRT0CLK_PARAM 0x340
+#define SCU0_CRT1CLK_PARAM 0x350
+#define SCU0_MPHYCLK_PARAM 0x360
+
+/* SOC1 */
+#define SCU1_REVISION_ID 0x0
+#define REVISION_ID GENMASK(23, 16)
+#define SCU1_CLK_STOP 0x240
+#define SCU1_CLK_STOP2 0x260
+#define SCU1_CLK_SEL1 0x280
+#define SCU1_CLK_SEL2 0x284
+#define UXCLK_MASK GENMASK(1, 0)
+#define HUXCLK_MASK GENMASK(4, 3)
+#define SCU1_HPLL_PARAM 0x300
+#define SCU1_APLL_PARAM 0x310
+#define SCU1_DPLL_PARAM 0x320
+#define SCU1_UXCLK_CTRL 0x330
+#define SCU1_HUXCLK_CTRL 0x334
+#define SCU1_MAC12_CLK_DLY 0x390
+#define SCU1_MAC12_CLK_DLY_100M 0x394
+#define SCU1_MAC12_CLK_DLY_10M 0x398
+
+enum {
+	CLK_MUX,
+	CLK_PLL,
+	CLK_GATE,
+	CLK_MISC,
+	CLK_FIXED,
+	CLK_DIVIDER,
+	CLK_UART_PLL,
+	CLK_DIV_TABLE,
+	CLK_FIXED_FACTOR,
+	CLK_GATE_ASPEED,
+};
+
+struct ast2700_clk_info {
+	const char *name;
+	const char * const *parent_names;
+	const struct clk_div_table *div_table;
+	unsigned long fixed_rate;
+	unsigned int mult;
+	unsigned int div;
+	u32 reg;
+	u32 flags;
+	u32 type;
+	u8 clk_idx;
+	u8 bit_shift;
+	u8 bit_width;
+	u8 num_parents;
+};
+
+struct ast2700_clk_data {
+	struct ast2700_clk_info const *clk_info;
+	unsigned int nr_clks;
+	const int scu;
+};
+
+struct ast2700_clk_ctrl {
+	const struct ast2700_clk_data *clk_data;
+	struct device *dev;
+	void __iomem *base;
+	spinlock_t lock; /* clk lock */
+};
+
+static const struct clk_div_table ast2700_rgmii_div_table[] = {
+	{ 0x0, 4 },
+	{ 0x1, 4 },
+	{ 0x2, 6 },
+	{ 0x3, 8 },
+	{ 0x4, 10 },
+	{ 0x5, 12 },
+	{ 0x6, 14 },
+	{ 0x7, 16 },
+	{ 0 }
+};
+
+static const struct clk_div_table ast2700_rmii_div_table[] = {
+	{ 0x0, 8 },
+	{ 0x1, 8 },
+	{ 0x2, 12 },
+	{ 0x3, 16 },
+	{ 0x4, 20 },
+	{ 0x5, 24 },
+	{ 0x6, 28 },
+	{ 0x7, 32 },
+	{ 0 }
+};
+
+static const struct clk_div_table ast2700_clk_div_table[] = {
+	{ 0x0, 2 },
+	{ 0x1, 2 },
+	{ 0x2, 3 },
+	{ 0x3, 4 },
+	{ 0x4, 5 },
+	{ 0x5, 6 },
+	{ 0x6, 7 },
+	{ 0x7, 8 },
+	{ 0 }
+};
+
+static const struct clk_div_table ast2700_clk_div_table2[] = {
+	{ 0x0, 2 },
+	{ 0x1, 4 },
+	{ 0x2, 6 },
+	{ 0x3, 8 },
+	{ 0x4, 10 },
+	{ 0x5, 12 },
+	{ 0x6, 14 },
+	{ 0x7, 16 },
+	{ 0 }
+};
+
+static const struct clk_div_table ast2700_clk_uart_div_table[] = {
+	{ 0x0, 1 },
+	{ 0x1, 13 },
+	{ 0 }
+};
+
+static const struct ast2700_clk_info ast2700_scu0_clk_info[] __initconst = {
+	[SCU0_CLKIN] = {
+		.type = CLK_FIXED,
+		.name = "soc0-clkin",
+		.fixed_rate = SCU_CLK_25MHZ,
+	},
+	[SCU0_CLK_24M] = {
+		.type = CLK_FIXED,
+		.name = "soc0-clk24Mhz",
+		.fixed_rate = SCU_CLK_24MHZ,
+	},
+	[SCU0_CLK_192M] = {
+		.type = CLK_FIXED,
+		.name = "soc0-clk192Mhz",
+		.fixed_rate = SCU_CLK_192MHZ,
+	},
+	[SCU0_CLK_HPLL] = {
+		.type = CLK_PLL,
+		.name = "soc0-hpll",
+		.parent_names = (const char *[]){ "soc0-clkin", },
+		.reg = SCU0_HPLL_PARAM,
+	},
+	[SCU0_CLK_HPLL_DIV2] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "soc0-hpll_div2",
+		.parent_names = (const char *[]){ "soc0-hpll", },
+		.mult = 1,
+		.div = 2,
+	},
+	[SCU0_CLK_HPLL_DIV4] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "soc0-hpll_div4",
+		.parent_names = (const char *[]){ "soc0-hpll", },
+		.mult = 1,
+		.div = 4,
+	},
+	[SCU0_CLK_HPLL_DIV_AHB] = {
+		.type = CLK_DIV_TABLE,
+		.name = "soc0-hpll_div_ahb",
+		.parent_names = (const char *[]){ "soc0-hpll", },
+		.reg = SCU0_HWSTRAP1,
+		.bit_shift = 5,
+		.bit_width = 2,
+		.div_table = ast2700_clk_div_table,
+	},
+	[SCU0_CLK_DPLL] = {
+		.type = CLK_PLL,
+		.name = "dpll",
+		.parent_names = (const char *[]){ "soc0-clkin", },
+		.reg = SCU0_DPLL_PARAM,
+	},
+	[SCU0_CLK_MPLL] = {
+		.type = CLK_PLL,
+		.name = "soc0-mpll",
+		.parent_names = (const char *[]){ "soc0-clkin", },
+		.reg = SCU0_MPLL_PARAM,
+	},
+	[SCU0_CLK_MPLL_DIV2] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "soc0-mpll_div2",
+		.parent_names = (const char *[]){ "soc0-mpll", },
+		.mult = 1,
+		.div = 2,
+	},
+	[SCU0_CLK_MPLL_DIV4] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "soc0-mpll_div4",
+		.parent_names = (const char *[]){ "soc0-mpll", },
+		.mult = 1,
+		.div = 4,
+	},
+	[SCU0_CLK_MPLL_DIV8] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "soc0-mpll_div8",
+		.parent_names = (const char *[]){ "soc0-mpll", },
+		.mult = 1,
+		.div = 8,
+	},
+	[SCU0_CLK_MPLL_DIV_AHB] = {
+		.type = CLK_DIV_TABLE,
+		.name = "soc0-mpll_div_ahb",
+		.parent_names = (const char *[]){ "soc0-mpll", },
+		.reg = SCU0_HWSTRAP1,
+		.bit_shift = 5,
+		.bit_width = 2,
+		.div_table = ast2700_clk_div_table,
+	},
+	[SCU0_CLK_D0] = {
+		.type = CLK_PLL,
+		.name = "d0clk",
+		.parent_names = (const char *[]){ "soc0-clkin", },
+		.reg = SCU0_D0CLK_PARAM,
+	},
+	[SCU0_CLK_D1] = {
+		.type = CLK_PLL,
+		.name = "d1clk",
+		.parent_names = (const char *[]){ "soc0-clkin", },
+		.reg = SCU0_D1CLK_PARAM,
+	},
+	[SCU0_CLK_CRT0] = {
+		.type = CLK_PLL,
+		.name = "crt0clk",
+		.parent_names = (const char *[]){ "soc0-clkin", },
+		.reg = SCU0_CRT0CLK_PARAM,
+	},
+	[SCU0_CLK_CRT1] = {
+		.type = CLK_PLL,
+		.name = "crt1clk",
+		.parent_names = (const char *[]){ "soc0-clkin", },
+		.reg = SCU0_CRT1CLK_PARAM,
+	},
+	[SCU0_CLK_MPHY] = {
+		.type = CLK_MISC,
+		.name = "mphyclk",
+		.parent_names = (const char *[]){ "soc0-hpll", },
+		.reg = SCU0_MPHYCLK_PARAM,
+	},
+	[SCU0_CLK_PSP] = {
+		.type = CLK_MUX,
+		.name = "pspclk",
+		.parent_names = (const char *[]){"soc0-mpll", "soc0-hpll", },
+		.num_parents = 2,
+		.reg = SCU0_HWSTRAP1,
+		.bit_shift = 4,
+		.bit_width = 1,
+	},
+	[SCU0_CLK_AXI0] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "axi0clk",
+		.parent_names = (const char *[]){"pspclk", },
+		.mult = 1,
+		.div = 2,
+	},
+	[SCU0_CLK_AHB] = {
+		.type = CLK_MUX,
+		.name = "soc0-ahb",
+		.parent_names = (const char *[]){"soc0-mpll_div_ahb", "soc0-hspll_div_ahb", },
+		.num_parents = 2,
+		.reg = SCU0_HWSTRAP1,
+		.bit_shift = 7,
+		.bit_width = 1,
+	},
+	[SCU0_CLK_AXI1] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "axi1clk",
+		.parent_names = (const char *[]){ "soc0-ahb", },
+		.mult = 1,
+		.div = 2,
+	},
+	[SCU0_CLK_APB] = {
+		.type = CLK_DIV_TABLE,
+		.name = "soc0-apb",
+		.parent_names = (const char *[]){ "axi0clk", },
+		.reg = SCU0_CLK_SEL1,
+		.bit_shift = 23,
+		.bit_width = 3,
+		.div_table = ast2700_clk_div_table2,
+	},
+	[SCU0_CLK_GATE_MCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "mclk-gate",
+		.parent_names = (const char *[]){ "soc0-mpll", },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 0,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_ECLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "eclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 1,
+	},
+	[SCU0_CLK_GATE_2DCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "gclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 2,
+	},
+	[SCU0_CLK_GATE_VCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "vclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 3,
+	},
+	[SCU0_CLK_GATE_BCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "bclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 4,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_VGA0CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "vga0clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 5,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_REFCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "soc0-refclk-gate",
+		.parent_names = (const char *[]){ "soc0-clkin", },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 6,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_U2PHY_REFCLK] = {
+		.type = CLK_MISC,
+		.name = "u2phy_refclk",
+		.parent_names = (const char *[]){ "soc0-mpll_div8", },
+		.reg = SCU0_CLK_SEL2,
+	},
+	[SCU0_CLK_U2PHY_CLK12M] = {
+		.type = CLK_FIXED,
+		.name = "u2phy_clk12m",
+		.parent_names = (const char *[]){  },
+		.fixed_rate = SCU_CLK_12MHZ,
+	},
+	[SCU0_CLK_GATE_PORTBUSB2CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "portb-usb2clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 7,
+	},
+	[SCU0_CLK_GATE_UHCICLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uhciclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 9,
+	},
+	[SCU0_CLK_GATE_VGA1CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "vga1clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 10,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_DDRPHYCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "ddrphy-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 11,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_E2M0CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "e2m0clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 12,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_HACCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "hacclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 13,
+	},
+	[SCU0_CLK_GATE_PORTAUSB2CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "porta-usb2clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 14,
+	},
+	[SCU0_CLK_UART] = {
+		.type = CLK_MUX,
+		.name = "soc0-uartclk",
+		.parent_names = (const char *[]){"soc0-clk24Mhz", "soc0-clk192Mhz", },
+		.num_parents = 2,
+		.reg = SCU0_CLK_SEL2,
+		.bit_shift = 14,
+		.bit_width = 1,
+	},
+	[SCU0_CLK_UART4] = {
+		.type = CLK_DIV_TABLE,
+		.name = "uart4clk",
+		.parent_names = (const char *[]){ "soc0-uartclk", },
+		.reg = SCU0_CLK_SEL2,
+		.bit_shift = 30,
+		.bit_width = 1,
+		.div_table = ast2700_clk_uart_div_table,
+	},
+	[SCU0_CLK_GATE_UART4CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart4clk-gate",
+		.parent_names = (const char *[]){"uart4clk" },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 15,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_SLICLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "soc0-sliclk-gate",
+		.parent_names = (const char *[]){	},
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 16,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_DACCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "dacclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 17,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_DP] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "dpclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 18,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_E2M1CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "e2m1clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 19,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU0_CLK_GATE_CRT0CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "crt0clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 20,
+	},
+	[SCU0_CLK_GATE_CRT1CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "crt1clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 21,
+	},
+	[SCU0_CLK_GATE_ECDSACLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "eccclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 23,
+	},
+	[SCU0_CLK_GATE_RSACLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "rsaclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 24,
+	},
+	[SCU0_CLK_GATE_RVAS0CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "rvasclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 25,
+	},
+	[SCU0_CLK_GATE_UFSCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "ufsclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 26,
+	},
+	[SCU0_CLK_EMMCMUX] = {
+		.type = CLK_MUX,
+		.name = "emmcsrc-mux",
+		.parent_names = (const char *[]){"soc0-mpll_div4", "soc0-hpll_div4", },
+		.num_parents = 2,
+		.reg = SCU0_CLK_SEL1,
+		.bit_shift = 11,
+		.bit_width = 1,
+	},
+	[SCU0_CLK_EMMC] = {
+		.type = CLK_DIV_TABLE,
+		.name = "emmcclk",
+		.parent_names = (const char *[]){ "emmcsrc-mux", },
+		.reg = SCU0_CLK_SEL1,
+		.bit_shift = 12,
+		.bit_width = 3,
+		.div_table = ast2700_clk_div_table2,
+	},
+	[SCU0_CLK_GATE_EMMCCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "emmcclk-gate",
+		.parent_names = (const char *[]){ "emmcclk", },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 27,
+	},
+	[SCU0_CLK_GATE_RVAS1CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "rvas2clk-gate",
+		.parent_names = (const char *[]){ "emmcclk", },
+		.reg = SCU0_CLK_STOP,
+		.clk_idx = 28,
+	},
+};
+
+static const struct ast2700_clk_info ast2700_scu1_clk_info[] __initconst = {
+	[SCU1_CLKIN] = {
+		.type = CLK_FIXED,
+		.name = "soc1-clkin",
+		.fixed_rate = SCU_CLK_25MHZ,
+	},
+	[SCU1_CLK_HPLL] = {
+		.type = CLK_PLL,
+		.name = "soc1-hpll",
+		.parent_names = (const char *[]){ "soc1-clkin", },
+		.reg = SCU1_HPLL_PARAM,
+	},
+	[SCU1_CLK_APLL] = {
+		.type = CLK_PLL,
+		.name = "soc1-apll",
+		.parent_names = (const char *[]){ "soc1-clkin", },
+		.reg = SCU1_APLL_PARAM,
+	},
+	[SCU1_CLK_APLL_DIV2] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "soc1-apll_div2",
+		.parent_names = (const char *[]){ "soc1-apll", },
+		.mult = 1,
+		.div = 2,
+	},
+	[SCU1_CLK_APLL_DIV4] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "soc1-apll_div4",
+		.parent_names = (const char *[]){ "soc1-apll", },
+		.mult = 1,
+		.div = 4,
+	},
+	[SCU1_CLK_DPLL] = {
+		.type = CLK_PLL,
+		.name = "soc1-dpll",
+		.parent_names = (const char *[]){ "soc1-clkin", },
+		.reg = SCU1_DPLL_PARAM,
+	},
+	[SCU1_CLK_UXCLK] = {
+		.type = CLK_MUX,
+		.name = "uxclk",
+		.parent_names = (const char *[]){ "soc1-apll_div4", "soc1-apll_div2",
+						 "soc1-apll", "soc1-hpll",},
+		.num_parents = 4,
+		.reg = SCU1_CLK_SEL2,
+		.bit_shift = 0,
+		.bit_width = 2,
+	},
+	[SCU1_CLK_UARTX] = {
+		.type = CLK_UART_PLL,
+		.name = "uartxclk",
+		.parent_names = (const char *[]){ "uxclk", },
+		.reg = SCU1_UXCLK_CTRL,
+	},
+	[SCU1_CLK_HUXCLK] = {
+		.type = CLK_MUX,
+		.name = "huxclk",
+		.parent_names = (const char *[]){"soc1-apll_div4", "soc1-apll_div2",
+						 "soc1-apll", "soc1-hpll",},
+		.num_parents = 4,
+		.reg = SCU1_CLK_SEL2,
+		.bit_shift = 3,
+		.bit_width = 2,
+	},
+	[SCU1_CLK_HUARTX] = {
+		.type = CLK_UART_PLL,
+		.name = "huartxclk",
+		.parent_names = (const char *[]){ "huxclk", },
+		.reg = SCU1_HUXCLK_CTRL,
+	},
+	[SCU1_CLK_AHB] = {
+		.type = CLK_DIV_TABLE,
+		.name = "soc1-ahb",
+		.parent_names = (const char *[]){"soc1-hpll", },
+		.reg = SCU1_CLK_SEL2,
+		.bit_shift = 20,
+		.bit_width = 3,
+		.div_table = ast2700_clk_div_table,
+	},
+	[SCU1_CLK_APB] = {
+		.type = CLK_DIV_TABLE,
+		.name = "soc1-apb",
+		.parent_names = (const char *[]){"soc1-hpll", },
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 18,
+		.bit_width = 3,
+		.div_table = ast2700_clk_div_table2,
+	},
+	[SCU1_CLK_RMII] = {
+		.type = CLK_DIV_TABLE,
+		.name = "rmii",
+		.parent_names = (const char *[]){"soc1-hpll", },
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 21,
+		.bit_width = 3,
+		.div_table = ast2700_rmii_div_table,
+	},
+	[SCU1_CLK_MAC0RCLK] = {
+		.type = CLK_GATE,
+		.name = "mac0rclk-gate",
+		.parent_names = (const char *[]){ "rmii", },
+		.reg = SCU1_MAC12_CLK_DLY,
+		.clk_idx = 29,
+	},
+	[SCU1_CLK_MAC1RCLK] = {
+		.type = CLK_GATE,
+		.name = "mac1rclk-gate",
+		.parent_names = (const char *[]){ "rmii", },
+		.reg = SCU1_MAC12_CLK_DLY,
+		.clk_idx = 30,
+	},
+	[SCU1_CLK_RGMII] = {
+		.type = CLK_DIV_TABLE,
+		.name = "rgmii",
+		.parent_names = (const char *[]){"soc1-hpll", },
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 25,
+		.bit_width = 3,
+		.div_table = ast2700_rgmii_div_table,
+	},
+	[SCU1_CLK_MACHCLK] = {
+		.type = CLK_DIV_TABLE,
+		.name = "machclk",
+		.parent_names = (const char *[]){"soc1-hpll", },
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 29,
+		.bit_width = 3,
+		.div_table = ast2700_clk_div_table,
+	},
+	[SCU1_CLK_GATE_LCLK0] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "lclk0-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 0,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_LCLK1] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "lclk1-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 1,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_ESPI0CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "espi0clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 2,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_ESPI1CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "espi1clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 3,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_APLL_DIVN] = {
+		.type = CLK_DIV_TABLE,
+		.name = "soc1-apll_divn",
+		.parent_names = (const char *[]){"soc1-apll", },
+		.reg = SCU1_CLK_SEL2,
+		.bit_shift = 8,
+		.bit_width = 3,
+		.div_table = ast2700_clk_div_table,
+	},
+	[SCU1_CLK_SDMUX] = {
+		.type = CLK_MUX,
+		.name = "sdclk-mux",
+		.parent_names = (const char *[]){ "soc1-hpll", "soc1-apll", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 13,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_SDCLK] = {
+		.type = CLK_DIV_TABLE,
+		.name = "sdclk",
+		.parent_names = (const char *[]){"sdclk-mux", },
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 14,
+		.bit_width = 3,
+		.div_table = ast2700_clk_div_table,
+	},
+	[SCU1_CLK_GATE_SDCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "sdclk-gate",
+		.parent_names = (const char *[]){"sdclk", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 4,
+	},
+	[SCU1_CLK_GATE_IPEREFCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "soc1-iperefclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 5,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_REFCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "soc1-refclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 6,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_LPCHCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "lpchclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 7,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_MAC0CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "mac0clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 8,
+	},
+	[SCU1_CLK_GATE_MAC1CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "mac1clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 9,
+	},
+	[SCU1_CLK_GATE_MAC2CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "mac2clk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 10,
+	},
+	[SCU1_CLK_UART0] = {
+		.type = CLK_MUX,
+		.name = "uart0clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 0,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART0CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart0clk-gate",
+		.parent_names = (const char *[]){ "uart0clk", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 11,
+	},
+	[SCU1_CLK_UART1] = {
+		.type = CLK_MUX,
+		.name = "uart1clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 1,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART1CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart1clk-gate",
+		.parent_names = (const char *[]){ "uart1clk", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 12,
+	},
+	[SCU1_CLK_UART2] = {
+		.type = CLK_MUX,
+		.name = "uart2clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 2,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART2CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart2clk-gate",
+		.parent_names = (const char *[]){ "uart2clk", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 13,
+	},
+	[SCU1_CLK_UART3] = {
+		.type = CLK_MUX,
+		.name = "uart3clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 3,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART3CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart3clk-gate",
+		.parent_names = (const char *[]){ "uart3clk", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 14,
+	},
+	[SCU1_CLK_GATE_I2CCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i2cclk-gate",
+		.parent_names = (const char *[]){	},
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 15,
+	},
+	[SCU1_CLK_GATE_I3C0CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c0clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 16,
+	},
+	[SCU1_CLK_GATE_I3C1CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c1clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 17,
+	},
+	[SCU1_CLK_GATE_I3C2CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c2clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 18,
+	},
+	[SCU1_CLK_GATE_I3C3CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c3clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 19,
+	},
+	[SCU1_CLK_GATE_I3C4CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c4clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 20,
+	},
+	[SCU1_CLK_GATE_I3C5CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c5clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 21,
+	},
+	[SCU1_CLK_GATE_I3C6CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c6clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 22,
+	},
+	[SCU1_CLK_GATE_I3C7CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c7clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 23,
+	},
+	[SCU1_CLK_GATE_I3C8CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c8clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 24,
+	},
+	[SCU1_CLK_GATE_I3C9CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c9clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 25,
+	},
+	[SCU1_CLK_GATE_I3C10CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c10clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 26,
+	},
+	[SCU1_CLK_GATE_I3C11CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c11clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 27,
+	},
+	[SCU1_CLK_GATE_I3C12CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c12clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 28,
+	},
+	[SCU1_CLK_GATE_I3C13CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c13clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 29,
+	},
+	[SCU1_CLK_GATE_I3C14CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c14clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 30,
+	},
+	[SCU1_CLK_GATE_I3C15CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "i3c15clk-gate",
+		.parent_names = (const char *[]){ "soc1-ahb", },
+		.reg = SCU1_CLK_STOP,
+		.clk_idx = 31,
+	},
+	[SCU1_CLK_UART5] = {
+		.type = CLK_MUX,
+		.name = "uart5clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 5,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART5CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart5clk-gate",
+		.parent_names = (const char *[]){ "uart5clk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 0,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_UART6] = {
+		.type = CLK_MUX,
+		.name = "uart6clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 6,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART6CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart6clk-gate",
+		.parent_names = (const char *[]){ "uart6clk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 1,
+	},
+	[SCU1_CLK_UART7] = {
+		.type = CLK_MUX,
+		.name = "uart7clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 7,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART7CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart7clk-gate",
+		.parent_names = (const char *[]){ "uart7clk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 2,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_UART8] = {
+		.type = CLK_MUX,
+		.name = "uart8clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 8,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART8CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart8clk-gate",
+		.parent_names = (const char *[]){ "uart8clk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 3,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_UART9] = {
+		.type = CLK_MUX,
+		.name = "uart9clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 9,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART9CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart9clk-gate",
+		.parent_names = (const char *[]){ "uart9clk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 4,
+	},
+	[SCU1_CLK_UART10] = {
+		.type = CLK_MUX,
+		.name = "uart10clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 10,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART10CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart10clk-gate",
+		.parent_names = (const char *[]){ "uart10clk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 5,
+	},
+	[SCU1_CLK_UART11] = {
+		.type = CLK_MUX,
+		.name = "uart11clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 11,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART11CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart11clk-gate",
+		.parent_names = (const char *[]){ "uart11clk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 6,
+	},
+	[SCU1_CLK_UART12] = {
+		.type = CLK_MUX,
+		.name = "uart12clk",
+		.parent_names = (const char *[]){"uartxclk", "huartxclk", },
+		.num_parents = 2,
+		.reg = SCU1_CLK_SEL1,
+		.bit_shift = 12,
+		.bit_width = 1,
+	},
+	[SCU1_CLK_GATE_UART12CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "uart12clk-gate",
+		.parent_names = (const char *[]){ "uart12clk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 7,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_UART13] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "uart13clk",
+		.parent_names = (const char *[]){ "huartxclk", },
+		.mult = 1,
+		.div = 1,
+	},
+	[SCU1_CLK_UART14] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "uart14clk",
+		.parent_names = (const char *[]){ "huartxclk", },
+		.mult = 1,
+		.div = 1,
+	},
+	[SCU1_CLK_GATE_FSICLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "fsiclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 8,
+	},
+	[SCU1_CLK_GATE_LTPIPHYCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "ltpiphyclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 9,
+	},
+	[SCU1_CLK_GATE_LTPICLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "ltpiclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 10,
+	},
+	[SCU1_CLK_GATE_VGALCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "vgalclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 11,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_UHCICLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "usbuartclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 12,
+	},
+	[SCU1_CLK_CAN] = {
+		.type = CLK_FIXED_FACTOR,
+		.name = "canclk",
+		.parent_names = (const char *[]){ "soc1-apll", },
+		.mult = 1,
+		.div = 10,
+	},
+	[SCU1_CLK_GATE_CANCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "canclk-gate",
+		.parent_names = (const char *[]){ "canclk", },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 13,
+	},
+	[SCU1_CLK_GATE_PCICLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "pciclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 14,
+	},
+	[SCU1_CLK_GATE_SLICLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "soc1-sliclk-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 15,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_E2MCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "soc1-e2m-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 16,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_PORTCUSB2CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "portcusb2-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 17,
+		.flags = CLK_IS_CRITICAL,
+	},
+	[SCU1_CLK_GATE_PORTDUSB2CLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "portdusb2-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 18,
+	},
+	[SCU1_CLK_GATE_LTPI1TXCLK] = {
+		.type = CLK_GATE_ASPEED,
+		.name = "ltp1tx-gate",
+		.parent_names = (const char *[]){  },
+		.reg = SCU1_CLK_STOP2,
+		.clk_idx = 19,
+	},
+};
+
+static struct clk_hw *ast2700_clk_hw_register_pll(int clk_idx, void __iomem *reg,
+						  const struct ast2700_clk_info *clk,
+						  struct ast2700_clk_ctrl *clk_ctrl)
+{
+	int scu = clk_ctrl->clk_data->scu;
+	unsigned int mult, div;
+	u32 val;
+
+	if (!scu && clk_idx == SCU0_CLK_HPLL) {
+		val = readl(clk_ctrl->base + SCU0_HWSTRAP1);
+		if ((val & GENMASK(3, 2)) != 0) {
+			switch ((val & GENMASK(3, 2)) >> 2) {
+			case 1:
+				return devm_clk_hw_register_fixed_rate(clk_ctrl->dev, "soc0-hpll",
+								       NULL, 0, 1900000000);
+			case 2:
+				return devm_clk_hw_register_fixed_rate(clk_ctrl->dev, "soc0-hpll",
+								       NULL, 0, 1800000000);
+			case 3:
+				return devm_clk_hw_register_fixed_rate(clk_ctrl->dev, "soc0-hpll",
+								       NULL, 0, 1700000000);
+			default:
+				return ERR_PTR(-EINVAL);
+			}
+		}
+	}
+
+	val = readl(reg);
+
+	if (val & BIT(24)) {
+		/* Pass through mode */
+		mult = 1;
+		div = 1;
+	} else {
+		u32 m = val & 0x1fff;
+		u32 n = (val >> 13) & 0x3f;
+		u32 p = (val >> 19) & 0xf;
+
+		if (scu) {
+			mult = (m + 1) / (n + 1);
+			div = (p + 1);
+		} else {
+			if (clk_idx == SCU0_CLK_MPLL) {
+				mult = m / (n + 1);
+				div = (p + 1);
+			} else {
+				mult = (m + 1) / (2 * (n + 1));
+				div = (p + 1);
+			}
+		}
+	}
+
+	return devm_clk_hw_register_fixed_factor(clk_ctrl->dev, clk->name,
+						 clk->parent_names[0], 0, mult, div);
+}
+
+static struct clk_hw *ast2700_clk_hw_register_uartpll(int clk_idx, void __iomem *reg,
+						      const struct ast2700_clk_info *clk,
+						      struct ast2700_clk_ctrl *clk_ctrl)
+{
+	unsigned int mult, div;
+	u32 val = readl(reg);
+	u32 r = val & 0xff;
+	u32 n = (val >> 8) & 0x3ff;
+
+	mult = r;
+	div = n * 2;
+
+	return devm_clk_hw_register_fixed_factor(clk_ctrl->dev, clk->name,
+						 clk->parent_names[0], 0, mult, div);
+}
+
+static struct clk_hw *ast2700_clk_hw_register_misc(int clk_idx, void __iomem *reg,
+						   const struct ast2700_clk_info *clk,
+						   struct ast2700_clk_ctrl *clk_ctrl)
+{
+	u32 div = 0;
+
+	if (clk_idx == SCU0_CLK_MPHY)
+		div = readl(reg) + 1;
+	else if (clk_idx == SCU0_CLK_U2PHY_REFCLK)
+		div = (GET_USB_REFCLK_DIV(readl(reg)) + 1) << 1;
+	else
+		return ERR_PTR(-EINVAL);
+
+	return devm_clk_hw_register_fixed_factor(clk_ctrl->dev, clk->name,
+						   clk->parent_names[0], clk->flags,
+						   1, div);
+}
+
+static int ast2700_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+	u32 reg;
+
+	reg = readl(gate->reg);
+
+	return !(reg & clk);
+}
+
+static int ast2700_clk_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+
+	if (readl(gate->reg) & clk)
+		writel(clk, gate->reg + 0x04);
+
+	return 0;
+}
+
+static void ast2700_clk_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+
+	/* Clock is set to enable, so use write to set register */
+	writel(clk, gate->reg);
+}
+
+static const struct clk_ops ast2700_clk_gate_ops = {
+	.enable = ast2700_clk_enable,
+	.disable = ast2700_clk_disable,
+	.is_enabled = ast2700_clk_is_enabled,
+};
+
+static struct clk_hw *ast2700_clk_hw_register_gate(struct device *dev, const char *name,
+						   const char *parent_name, unsigned long flags,
+						   void __iomem *reg, u8 clock_idx,
+						   u8 clk_gate_flags, spinlock_t *lock)
+{
+	struct clk_gate *gate;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret = -EINVAL;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &ast2700_clk_gate_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	gate->reg = reg;
+	gate->bit_idx = clock_idx;
+	gate->flags = clk_gate_flags;
+	gate->lock = lock;
+	gate->hw.init = &init;
+
+	hw = &gate->hw;
+	ret = clk_hw_register(dev, hw);
+	if (ret) {
+		kfree(gate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+static int ast2700_soc_clk_probe(struct platform_device *pdev)
+{
+	struct ast2700_clk_data *clk_data;
+	struct ast2700_clk_ctrl *clk_ctrl;
+	struct clk_hw_onecell_data *clk_hw_data;
+	struct device *dev = &pdev->dev;
+	void __iomem *clk_base;
+	struct clk_hw **hws;
+	char *reset_name;
+	int ret;
+	int i;
+
+	clk_ctrl = devm_kzalloc(dev, sizeof(*clk_ctrl), GFP_KERNEL);
+	if (!clk_ctrl)
+		return -ENOMEM;
+	clk_ctrl->dev = dev;
+	dev_set_drvdata(&pdev->dev, clk_ctrl);
+
+	spin_lock_init(&clk_ctrl->lock);
+
+	clk_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(clk_base))
+		return PTR_ERR(clk_base);
+
+	clk_ctrl->base = clk_base;
+
+	clk_data = (struct ast2700_clk_data *)of_device_get_match_data(dev);
+	if (!clk_data)
+		return devm_of_platform_populate(dev);
+
+	clk_ctrl->clk_data = clk_data;
+	reset_name = devm_kasprintf(dev, GFP_KERNEL, "reset%d", clk_data->scu);
+
+	clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws, clk_data->nr_clks),
+				   GFP_KERNEL);
+	if (!clk_hw_data)
+		return -ENOMEM;
+
+	clk_hw_data->num = clk_data->nr_clks;
+	hws = clk_hw_data->hws;
+
+	for (i = 0; i < clk_data->nr_clks; i++) {
+		const struct ast2700_clk_info *clk = &clk_data->clk_info[i];
+		void __iomem *reg = clk_ctrl->base + clk->reg;
+
+		if (clk->type == CLK_FIXED) {
+			hws[i] = devm_clk_hw_register_fixed_rate(dev, clk->name, NULL,
+								 clk->flags, clk->fixed_rate);
+		} else if (clk->type == CLK_FIXED_FACTOR) {
+			hws[i] = devm_clk_hw_register_fixed_factor(dev, clk->name,
+								   clk->parent_names[0], clk->flags,
+								   clk->mult, clk->div);
+		} else if (clk->type == CLK_PLL) {
+			hws[i] = ast2700_clk_hw_register_pll(i, reg, clk, clk_ctrl);
+		} else if (clk->type == CLK_UART_PLL) {
+			hws[i] = ast2700_clk_hw_register_uartpll(i, reg, clk, clk_ctrl);
+		} else if (clk->type == CLK_MUX) {
+			hws[i] = devm_clk_hw_register_mux(dev, clk->name, clk->parent_names,
+							  clk->num_parents, clk->flags, reg,
+							  clk->bit_shift, clk->bit_width,
+							  0, &clk_ctrl->lock);
+		} else if (clk->type == CLK_MISC) {
+			hws[i] = ast2700_clk_hw_register_misc(i, reg, clk, clk_ctrl);
+		} else if (clk->type == CLK_DIVIDER) {
+			hws[i] = devm_clk_hw_register_divider(dev, clk->name, clk->parent_names[0],
+							      clk->flags, reg, clk->bit_shift,
+							      clk->bit_width, 0,
+							      &clk_ctrl->lock);
+		} else if (clk->type == CLK_DIV_TABLE) {
+			hws[i] = clk_hw_register_divider_table(dev, clk->name, clk->parent_names[0],
+							       clk->flags, reg, clk->bit_shift,
+							       clk->bit_width, 0,
+							       clk->div_table, &clk_ctrl->lock);
+		} else if (clk->type == CLK_GATE_ASPEED) {
+			hws[i] = ast2700_clk_hw_register_gate(dev, clk->name, clk->parent_names[0],
+							      clk->flags, reg, clk->clk_idx,
+							      clk->flags, &clk_ctrl->lock);
+		} else {
+			hws[i] = clk_hw_register_gate(dev, clk->name, clk->parent_names[0],
+						      clk->flags, reg, clk->clk_idx, clk->flags,
+						      &clk_ctrl->lock);
+		}
+
+		if (IS_ERR(hws[i]))
+			return PTR_ERR(hws[i]);
+	}
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_hw_data);
+	if (ret)
+		return ret;
+
+	return aspeed_reset_controller_register(dev, clk_base, reset_name);
+}
+
+static const struct ast2700_clk_data ast2700_clk0_data = {
+	.scu = 0,
+	.nr_clks = ARRAY_SIZE(ast2700_scu0_clk_info),
+	.clk_info = ast2700_scu0_clk_info,
+};
+
+static const struct ast2700_clk_data ast2700_clk1_data = {
+	.scu = 1,
+	.nr_clks = ARRAY_SIZE(ast2700_scu1_clk_info),
+	.clk_info = ast2700_scu1_clk_info,
+};
+
+static const struct of_device_id ast2700_scu_match[] = {
+	{ .compatible = "aspeed,ast2700-scu0", .data = &ast2700_clk0_data },
+	{ .compatible = "aspeed,ast2700-scu1", .data = &ast2700_clk1_data },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, ast2700_scu_match);
+
+static struct platform_driver ast2700_scu_driver = {
+	.driver = {
+		.name = "clk-ast2700",
+		.of_match_table = ast2700_scu_match,
+	},
+};
+
+builtin_platform_driver_probe(ast2700_scu_driver, ast2700_soc_clk_probe);