| Message ID | 20241024071548.3370363-2-billy_tsai@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Enable WDT reload feature | expand |
On Thu, 24 Oct 2024 15:15:47 +0800, Billy Tsai wrote: > Add an option to support #pwm-cells up to 4. The additional cell is used > to enable the WDT reset feature, which is specific to the ASPEED PWM > controller. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > Change-Id: Iefcc9622ac3dc684441d3e77aeb53c00f2ce4097 > --- > .../bindings/hwmon/aspeed,g6-pwm-tach.yaml | 25 ++++++++++++++++++- > 1 file changed, 24 insertions(+), 1 deletion(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.example.dts:54.48-70.11: ERROR (duplicate_label): /example-1/pwm-tach-controller@1e610000: Duplicate label 'pwm_tach' on /example-1/pwm-tach-controller@1e610000 and /example-0/pwm-tach-controller@1e610000 ERROR: Input tree has errors, aborting (use -f to force output) make[2]: *** [scripts/Makefile.dtbs:129: Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.example.dtb] Error 2 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1442: dt_binding_check] Error 2 make: *** [Makefile:224: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241024071548.3370363-2-billy_tsai@aspeedtech.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Thu, Oct 24, 2024 at 03:15:47PM +0800, Billy Tsai wrote: > Add an option to support #pwm-cells up to 4. The additional cell is used > to enable the WDT reset feature, which is specific to the ASPEED PWM > controller. Use subject prefixes matching the subsystem. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > Change-Id: Iefcc9622ac3dc684441d3e77aeb53c00f2ce4097 Drop. > --- > .../bindings/hwmon/aspeed,g6-pwm-tach.yaml | 25 ++++++++++++++++++- > 1 file changed, 24 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml > index 9e5ed901ae54..0cc92ce29ece 100644 > --- a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml > +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml > @@ -31,7 +31,11 @@ properties: > maxItems: 1 > > "#pwm-cells": > - const: 3 > + enum: [3, 4] > + description: | > + The value should be 4 to enable the WDT reload feature, which will change the duty cycle to > + a preprogrammed value after WDT/EXTRST#. > + The range for the fourth cell value supported by this binding is 0 to 255. Wrap lines at 80. > > patternProperties: > "^fan-[0-9]+$": > @@ -69,3 +73,22 @@ examples: > pwms = <&pwm_tach 1 40000 0>; > }; > }; > + - | > + #include <dt-bindings/clock/aspeed-clock.h> > + pwm_tach: pwm-tach-controller@1e610000 { > + compatible = "aspeed,ast2600-pwm-tach"; > + reg = <0x1e610000 0x100>; > + clocks = <&syscon ASPEED_CLK_AHB>; > + resets = <&syscon ASPEED_RESET_PWM>; > + #pwm-cells = <4>; > + > + fan-0 { > + tach-ch = /bits/ 8 <0x0>; > + pwms = <&pwm_tach 0 40000 0 128>; > + }; > + > + fan-1 { > + tach-ch = /bits/ 8 <0x1 0x2>; > + pwms = <&pwm_tach 1 40000 0 160>; > + }; > + }; > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml index 9e5ed901ae54..0cc92ce29ece 100644 --- a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml @@ -31,7 +31,11 @@ properties: maxItems: 1 "#pwm-cells": - const: 3 + enum: [3, 4] + description: | + The value should be 4 to enable the WDT reload feature, which will change the duty cycle to + a preprogrammed value after WDT/EXTRST#. + The range for the fourth cell value supported by this binding is 0 to 255. patternProperties: "^fan-[0-9]+$": @@ -69,3 +73,22 @@ examples: pwms = <&pwm_tach 1 40000 0>; }; }; + - | + #include <dt-bindings/clock/aspeed-clock.h> + pwm_tach: pwm-tach-controller@1e610000 { + compatible = "aspeed,ast2600-pwm-tach"; + reg = <0x1e610000 0x100>; + clocks = <&syscon ASPEED_CLK_AHB>; + resets = <&syscon ASPEED_RESET_PWM>; + #pwm-cells = <4>; + + fan-0 { + tach-ch = /bits/ 8 <0x0>; + pwms = <&pwm_tach 0 40000 0 128>; + }; + + fan-1 { + tach-ch = /bits/ 8 <0x1 0x2>; + pwms = <&pwm_tach 1 40000 0 160>; + }; + };
Add an option to support #pwm-cells up to 4. The additional cell is used to enable the WDT reset feature, which is specific to the ASPEED PWM controller. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: Iefcc9622ac3dc684441d3e77aeb53c00f2ce4097 --- .../bindings/hwmon/aspeed,g6-pwm-tach.yaml | 25 ++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)