@@ -88,5 +88,19 @@ power: power {
firmware = <&firmware>;
#power-domain-cells = <1>;
};
+};
+
+&hvs {
+ clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
+ clock-names = "core", "disp";
+};
+
+&hdmi0 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+};
+&hdmi1 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
};
@@ -265,6 +265,172 @@ gicv2: interrupt-controller@7fff9000 {
interrupt-controller;
#interrupt-cells = <3>;
};
+
+ aon_intr: interrupt-controller@7d510600 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7d510600 0x30>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pixelvalve0: pixelvalve@7c410000 {
+ compatible = "brcm,bcm2712-pixelvalve0";
+ reg = <0x7c410000 0x100>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pixelvalve1: pixelvalve@7c411000 {
+ compatible = "brcm,bcm2712-pixelvalve1";
+ reg = <0x7c411000 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mop: mop@7c500000 {
+ compatible = "brcm,bcm2712-mop";
+ reg = <0x7c500000 0x28>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <1>;
+ };
+
+ moplet: moplet@7c501000 {
+ compatible = "brcm,bcm2712-moplet";
+ reg = <0x7c501000 0x20>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <0>;
+ };
+
+ disp_intr: interrupt-controller@7c502000 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7c502000 0x30>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ dvp: clock@7c700000 {
+ compatible = "brcm,brcm2711-dvp";
+ reg = <0x7c700000 0x10>;
+ clocks = <&clk_108MHz>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ ddc0: i2c@7d508200 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d508200 0x58>;
+ interrupt-parent = <&bsc_irq>;
+ interrupts = <1>;
+ clock-frequency = <97500>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ddc1: i2c@7d508280 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d508280 0x58>;
+ interrupt-parent = <&bsc_irq>;
+ interrupts = <2>;
+ clock-frequency = <97500>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ bsc_irq: intc@7d508380 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d508380 0x10>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ main_irq: intc@7d508400 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d508400 0x10>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ hdmi0: hdmi@7ef00700 {
+ compatible = "brcm,bcm2712-hdmi0";
+ reg = <0x7c701400 0x300>,
+ <0x7c701000 0x200>,
+ <0x7c701d00 0x300>,
+ <0x7c702000 0x80>,
+ <0x7c703800 0x200>,
+ <0x7c704000 0x800>,
+ <0x7c700100 0x80>,
+ <0x7d510800 0x100>,
+ <0x7c720000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ resets = <&dvp 1>;
+ interrupt-parent = <&aon_intr>;
+ interrupts = <1>, <2>, <3>,
+ <7>, <8>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low",
+ "hpd-connected", "hpd-removed";
+ ddc = <&ddc0>;
+ };
+
+ hdmi1: hdmi@7ef05700 {
+ compatible = "brcm,bcm2712-hdmi1";
+ reg = <0x7c706400 0x300>,
+ <0x7c706000 0x200>,
+ <0x7c706d00 0x300>,
+ <0x7c707000 0x80>,
+ <0x7c708800 0x200>,
+ <0x7c709000 0x800>,
+ <0x7c700180 0x80>,
+ <0x7d511000 0x100>,
+ <0x7c720000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ resets = <&dvp 2>;
+ interrupt-parent = <&aon_intr>;
+ interrupts = <11>, <12>, <13>,
+ <14>, <15>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low",
+ "hpd-connected", "hpd-removed";
+ ddc = <&ddc1>;
+ };
+ };
+
+ axi: axi {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ <0x10 0x00000000 0x10 0x00000000 0x01 0x00000000>,
+ <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+ <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+ <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+ dma-ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ <0x10 0x00000000 0x10 0x00000000 0x01 0x00000000>,
+ <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+ <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+ <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+ vc4: gpu {
+ compatible = "brcm,bcm2712-vc6";
+ };
};
timer {
@@ -280,4 +446,26 @@ IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>;
};
+
+ clk_27MHz: clk-27M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ clock-output-names = "27MHz-clock";
+ };
+
+ clk_108MHz: clk-108M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <108000000>;
+ clock-output-names = "108MHz-clock";
+ };
+
+ hvs: hvs@107c580000 {
+ compatible = "brcm,bcm2712-hvs";
+ reg = <0x10 0x7c580000 0x0 0x1a000>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <2>, <9>, <16>;
+ interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof";
+ };
};
Adds the HVS and associated hardware blocks to support the HDMI and writeback connectors on BCM2712 / Pi5. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 14 ++ arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 188 +++++++++++++++++++++++ 2 files changed, 202 insertions(+)