diff mbox series

[v7,3/5] firmware: psci: Read and use vendor reset types

Message ID 20241028-arm-psci-system_reset2-vendor-reboots-v7-3-a4c40b0ebc54@quicinc.com (mailing list archive)
State New
Headers show
Series Implement vendor resets for PSCI SYSTEM_RESET2 | expand

Commit Message

Elliot Berman Oct. 28, 2024, 6:44 p.m. UTC
SoC vendors have different types of resets and are controlled through
various registers. For instance, Qualcomm chipsets can reboot to a
"download mode" that allows a RAM dump to be collected. Another example
is they also support writing a cookie that can be read by bootloader
during next boot. PSCI offers a mechanism, SYSTEM_RESET2, for these
vendor reset types to be implemented without requiring drivers for every
register/cookie.

Add support in PSCI to statically map reboot mode commands from
userspace to a vendor reset and cookie value using the device tree.

A separate initcall is needed to parse the devicetree, instead of using
psci_dt_init because mm isn't sufficiently set up to allocate memory.

Reboot mode framework is close but doesn't quite fit with the
design and requirements for PSCI SYSTEM_RESET2. Some of these issues can
be solved but doesn't seem reasonable in sum:
 1. reboot mode registers against the reboot_notifier_list, which is too
    early to call SYSTEM_RESET2. PSCI would need to remember the reset
    type from the reboot-mode framework callback and use it
    psci_sys_reset.
 2. reboot mode assumes only one cookie/parameter is described in the
    device tree. SYSTEM_RESET2 uses 2: one for the type and one for
    cookie.
 3. psci cpuidle driver already registers a driver against the
    arm,psci-1.0 compatible. Refactoring would be needed to have both a
    cpuidle and reboot-mode driver.

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 drivers/firmware/psci/psci.c | 104 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

Comments

Stephen Boyd Oct. 28, 2024, 6:57 p.m. UTC | #1
Quoting Elliot Berman (2024-10-28 11:44:57)
> diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c
> index 2328ca58bba6..2d7b6efc8743 100644
> --- a/drivers/firmware/psci/psci.c
> +++ b/drivers/firmware/psci/psci.c
> @@ -79,6 +79,14 @@ struct psci_0_1_function_ids get_psci_0_1_function_ids(void)
>  static u32 psci_cpu_suspend_feature;
>  static bool psci_system_reset2_supported;
>
> +struct psci_reset_param {
> +       const char *mode;
> +       u32 reset_type;
> +       u32 cookie;
> +};
> +static struct psci_reset_param *psci_reset_params;
> +static size_t num_psci_reset_params;

These two can be __ro_after_init

> +
>  static inline bool psci_has_ext_power_state(void)
>  {
>         return psci_cpu_suspend_feature &
> @@ -305,9 +313,38 @@ static int get_set_conduit_method(const struct device_node *np)
>         return 0;
>  }
>
> +static void psci_vendor_system_reset2(unsigned long action, void *data)

Can 'data' simply be 'const char *cmd' instead?

And can 'action' be dropped? It isn't used in this function.

> +{
> +       const char *cmd = data;
> +       unsigned long ret;
> +       size_t i;
> +
> +       for (i = 0; i < num_psci_reset_params; i++) {
> +               if (!strcmp(psci_reset_params[i].mode, cmd)) {
> +                       ret = invoke_psci_fn(PSCI_FN_NATIVE(1_1, SYSTEM_RESET2),
> +                                            psci_reset_params[i].reset_type,
> +                                            psci_reset_params[i].cookie, 0);
> +                       /*
> +                        * if vendor reset fails, log it and fall back to
> +                        * architecture reset types
> +                        */
> +                       pr_err("failed to perform reset \"%s\": %ld\n", cmd,
> +                              (long)ret);

			return?

because we're not going to try another one, right?
diff mbox series

Patch

diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c
index 2328ca58bba6..2d7b6efc8743 100644
--- a/drivers/firmware/psci/psci.c
+++ b/drivers/firmware/psci/psci.c
@@ -79,6 +79,14 @@  struct psci_0_1_function_ids get_psci_0_1_function_ids(void)
 static u32 psci_cpu_suspend_feature;
 static bool psci_system_reset2_supported;
 
+struct psci_reset_param {
+	const char *mode;
+	u32 reset_type;
+	u32 cookie;
+};
+static struct psci_reset_param *psci_reset_params;
+static size_t num_psci_reset_params;
+
 static inline bool psci_has_ext_power_state(void)
 {
 	return psci_cpu_suspend_feature &
@@ -305,9 +313,38 @@  static int get_set_conduit_method(const struct device_node *np)
 	return 0;
 }
 
+static void psci_vendor_system_reset2(unsigned long action, void *data)
+{
+	const char *cmd = data;
+	unsigned long ret;
+	size_t i;
+
+	for (i = 0; i < num_psci_reset_params; i++) {
+		if (!strcmp(psci_reset_params[i].mode, cmd)) {
+			ret = invoke_psci_fn(PSCI_FN_NATIVE(1_1, SYSTEM_RESET2),
+					     psci_reset_params[i].reset_type,
+					     psci_reset_params[i].cookie, 0);
+			/*
+			 * if vendor reset fails, log it and fall back to
+			 * architecture reset types
+			 */
+			pr_err("failed to perform reset \"%s\": %ld\n", cmd,
+			       (long)ret);
+		}
+	}
+}
+
 static int psci_sys_reset(struct notifier_block *nb, unsigned long action,
 			  void *data)
 {
+	/*
+	 * try to do the vendor system_reset2
+	 * If the reset fails or there wasn't a match on the command,
+	 * fall back to architectural resets
+	 */
+	if (data && num_psci_reset_params)
+		psci_vendor_system_reset2(action, data);
+
 	if ((reboot_mode == REBOOT_WARM || reboot_mode == REBOOT_SOFT) &&
 	    psci_system_reset2_supported) {
 		/*
@@ -750,6 +787,73 @@  static const struct of_device_id psci_of_match[] __initconst = {
 	{},
 };
 
+#define REBOOT_PREFIX "mode-"
+
+static int __init psci_init_system_reset2_modes(void)
+{
+	const size_t len = strlen(REBOOT_PREFIX);
+	struct psci_reset_param *param;
+	struct device_node *psci_np __free(device_node) = NULL;
+	struct device_node *np __free(device_node) = NULL;
+	struct property *prop;
+	size_t count = 0;
+	u32 magic[2];
+	int num;
+
+	if (!psci_system_reset2_supported)
+		return 0;
+
+	psci_np = of_find_matching_node(NULL, psci_of_match);
+	if (!psci_np)
+		return 0;
+
+	np = of_find_node_by_name(psci_np, "reset-types");
+	if (!np)
+		return 0;
+
+	for_each_property_of_node(np, prop) {
+		if (strncmp(prop->name, REBOOT_PREFIX, len))
+			continue;
+		num = of_property_count_u32_elems(np, prop->name);
+		if (num != 1 && num != 2)
+			continue;
+
+		count++;
+	}
+
+	param = psci_reset_params =
+		kcalloc(count, sizeof(*psci_reset_params), GFP_KERNEL);
+	if (!psci_reset_params)
+		return -ENOMEM;
+
+	for_each_property_of_node(np, prop) {
+		if (strncmp(prop->name, REBOOT_PREFIX, len))
+			continue;
+
+		param->mode = kstrdup_const(prop->name + len, GFP_KERNEL);
+		if (!param->mode)
+			continue;
+
+		num = of_property_read_variable_u32_array(np, prop->name, magic,
+							  1, ARRAY_SIZE(magic));
+		if (num < 0) {
+			pr_warn("Failed to parse vendor reboot mode %s\n",
+				param->mode);
+			kfree_const(param->mode);
+			continue;
+		}
+
+		/* Force reset type to be in vendor space */
+		param->reset_type = PSCI_1_1_RESET_TYPE_VENDOR_START | magic[0];
+		param->cookie = num > 1 ? magic[1] : 0;
+		param++;
+		num_psci_reset_params++;
+	}
+
+	return 0;
+}
+arch_initcall(psci_init_system_reset2_modes);
+
 int __init psci_dt_init(void)
 {
 	struct device_node *np;