| Message ID | 20241028023740.19732-10-victor.liu@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add ITE IT6263 LVDS to HDMI converter support | expand |
Hi Liu Ying, Thanks for the patch. > -----Original Message----- > From: Liu Ying <victor.liu@nxp.com> > Sent: 28 October 2024 02:38 > Subject: [PATCH v4 09/13] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter > > Document ITE IT6263 LVDS to HDMI converter. > > Product link: > https://www.ite.com.tw/en/product/cate1/IT6263 > > Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Cheers, Biju > --- > v4: > * Require dual-lvds-odd-pixels or dual-lvds-even-pixels DT properties for > port@1. > * Drop "data-mirror: true"(30-bit LVDS data bit order is not reversed). > > v3: > * Reference lvds-dual-ports.yaml. (Dmitry) > * Add data-mapping DT property. (Dmitry, Biju) > * Allow data-mirror. > * Drop ite,lvds-link-num-data-lanes DT property. (Dmitry, Biju) > > v2: > * Document number of LVDS link data lanes. (Biju) > * Simplify ports property by dropping "oneOf". (Rob) > > .../bindings/display/bridge/ite,it6263.yaml | 250 ++++++++++++++++++ > 1 file changed, 250 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml > b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml > new file mode 100644 > index 000000000000..0a10e10d80ff > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml > @@ -0,0 +1,250 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ITE IT6263 LVDS to HDMI converter > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +description: | > + The IT6263 is a high-performance single-chip De-SSC(De-Spread > +Spectrum) LVDS > + to HDMI converter. Combined with LVDS receiver and HDMI 1.4a > +transmitter, > + the IT6263 supports LVDS input and HDMI 1.4 output by conversion function. > + The built-in LVDS receiver can support single-link and dual-link LVDS > +inputs, > + and the built-in HDMI transmitter is fully compliant with HDMI > +1.4a/3D, HDCP > + 1.2 and backward compatible with DVI 1.0 specification. > + > + The IT6263 also encodes and transmits up to 8 channels of I2S digital > + audio, with sampling rate up to 192KHz and sample size up to 24 bits. > + In addition, an S/PDIF input port takes in compressed audio of up to 192KHz frame rate. > + > + The newly supported High-Bit Rate(HBR) audio by HDMI specifications > + v1.3 is provided by the IT6263 in two interfaces: the four I2S input > + ports or the S/PDIF input port. With both interfaces the highest > + possible HBR frame rate is supported at up to 768KHz. > + > +allOf: > + - $ref: /schemas/display/lvds-dual-ports.yaml# > + > +properties: > + compatible: > + const: ite,it6263 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + description: audio master clock > + > + clock-names: > + const: mclk > + > + data-mapping: > + enum: > + - jeida-18 > + - jeida-24 > + - jeida-30 > + - vesa-24 > + - vesa-30 > + > + reset-gpios: > + maxItems: 1 > + > + ivdd-supply: > + description: 1.8V digital logic power > + > + ovdd-supply: > + description: 3.3V I/O pin power > + > + txavcc18-supply: > + description: 1.8V HDMI analog frontend power > + > + txavcc33-supply: > + description: 3.3V HDMI analog frontend power > + > + pvcc1-supply: > + description: 1.8V HDMI frontend core PLL power > + > + pvcc2-supply: > + description: 1.8V HDMI frontend filter PLL power > + > + avcc-supply: > + description: 3.3V LVDS frontend power > + > + anvdd-supply: > + description: 1.8V LVDS frontend analog power > + > + apvdd-supply: > + description: 1.8V LVDS frontend PLL power > + > + "#sound-dai-cells": > + const: 0 > + > + ite,i2s-audio-fifo-sources: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 4 > + items: > + enum: [0, 1, 2, 3] > + description: > + Each array element indicates the pin number of an I2S serial data input > + line which is connected to an audio FIFO, from audio FIFO0 to FIFO3. > + > + ite,rl-channel-swap-audio-sources: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 4 > + uniqueItems: true > + items: > + enum: [0, 1, 2, 3] > + description: > + Each array element indicates an audio source whose right channel and left > + channel are swapped by this converter. For I2S, the element is the pin > + number of an I2S serial data input line. For S/PDIF, the element is always > + 0. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: true > + > + port@1: > + oneOf: > + - required: [dual-lvds-odd-pixels] > + - required: [dual-lvds-even-pixels] > + > + port@2: > + $ref: /schemas/graph.yaml#/properties/port > + description: video port for the HDMI output > + > + port@3: > + $ref: /schemas/graph.yaml#/properties/port > + description: sound input port > + > + required: > + - port@0 > + - port@2 > + > +required: > + - compatible > + - reg > + - data-mapping > + - ivdd-supply > + - ovdd-supply > + - txavcc18-supply > + - txavcc33-supply > + - pvcc1-supply > + - pvcc2-supply > + - avcc-supply > + - anvdd-supply > + - apvdd-supply > + > +unevaluatedProperties: false > + > +examples: > + - | > + /* single-link LVDS input */ > + #include <dt-bindings/gpio/gpio.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + hdmi@4c { > + compatible = "ite,it6263"; > + reg = <0x4c>; > + data-mapping = "jeida-24"; > + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; > + ivdd-supply = <®_buck5>; > + ovdd-supply = <®_vext_3v3>; > + txavcc18-supply = <®_buck5>; > + txavcc33-supply = <®_vext_3v3>; > + pvcc1-supply = <®_buck5>; > + pvcc2-supply = <®_buck5>; > + avcc-supply = <®_vext_3v3>; > + anvdd-supply = <®_buck5>; > + apvdd-supply = <®_buck5>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + it6263_lvds_link1: endpoint { > + remote-endpoint = <&ldb_lvds_ch0>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + it6263_out: endpoint { > + remote-endpoint = <&hdmi_in>; > + }; > + }; > + }; > + }; > + }; > + > + - | > + /* dual-link LVDS input */ > + #include <dt-bindings/gpio/gpio.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + hdmi@4c { > + compatible = "ite,it6263"; > + reg = <0x4c>; > + data-mapping = "jeida-24"; > + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; > + ivdd-supply = <®_buck5>; > + ovdd-supply = <®_vext_3v3>; > + txavcc18-supply = <®_buck5>; > + txavcc33-supply = <®_vext_3v3>; > + pvcc1-supply = <®_buck5>; > + pvcc2-supply = <®_buck5>; > + avcc-supply = <®_vext_3v3>; > + anvdd-supply = <®_buck5>; > + apvdd-supply = <®_buck5>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dual-lvds-odd-pixels; > + > + it6263_lvds_link1_dual: endpoint { > + remote-endpoint = <&ldb_lvds_ch0>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dual-lvds-even-pixels; > + > + it6263_lvds_link2_dual: endpoint { > + remote-endpoint = <&ldb_lvds_ch1>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + it6263_out_dual: endpoint { > + remote-endpoint = <&hdmi_in>; > + }; > + }; > + }; > + }; > + }; > -- > 2.34.1
On Mon, 28 Oct 2024 10:37:36 +0800, Liu Ying wrote: > Document ITE IT6263 LVDS to HDMI converter. > > Product link: > https://www.ite.com.tw/en/product/cate1/IT6263 > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > v4: > * Require dual-lvds-odd-pixels or dual-lvds-even-pixels DT properties for > port@1. > * Drop "data-mirror: true"(30-bit LVDS data bit order is not reversed). > > v3: > * Reference lvds-dual-ports.yaml. (Dmitry) > * Add data-mapping DT property. (Dmitry, Biju) > * Allow data-mirror. > * Drop ite,lvds-link-num-data-lanes DT property. (Dmitry, Biju) > > v2: > * Document number of LVDS link data lanes. (Biju) > * Simplify ports property by dropping "oneOf". (Rob) > > .../bindings/display/bridge/ite,it6263.yaml | 250 ++++++++++++++++++ > 1 file changed, 250 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml new file mode 100644 index 000000000000..0a10e10d80ff --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml @@ -0,0 +1,250 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE IT6263 LVDS to HDMI converter + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The IT6263 is a high-performance single-chip De-SSC(De-Spread Spectrum) LVDS + to HDMI converter. Combined with LVDS receiver and HDMI 1.4a transmitter, + the IT6263 supports LVDS input and HDMI 1.4 output by conversion function. + The built-in LVDS receiver can support single-link and dual-link LVDS inputs, + and the built-in HDMI transmitter is fully compliant with HDMI 1.4a/3D, HDCP + 1.2 and backward compatible with DVI 1.0 specification. + + The IT6263 also encodes and transmits up to 8 channels of I2S digital audio, + with sampling rate up to 192KHz and sample size up to 24 bits. In addition, + an S/PDIF input port takes in compressed audio of up to 192KHz frame rate. + + The newly supported High-Bit Rate(HBR) audio by HDMI specifications v1.3 is + provided by the IT6263 in two interfaces: the four I2S input ports or the + S/PDIF input port. With both interfaces the highest possible HBR frame rate + is supported at up to 768KHz. + +allOf: + - $ref: /schemas/display/lvds-dual-ports.yaml# + +properties: + compatible: + const: ite,it6263 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: audio master clock + + clock-names: + const: mclk + + data-mapping: + enum: + - jeida-18 + - jeida-24 + - jeida-30 + - vesa-24 + - vesa-30 + + reset-gpios: + maxItems: 1 + + ivdd-supply: + description: 1.8V digital logic power + + ovdd-supply: + description: 3.3V I/O pin power + + txavcc18-supply: + description: 1.8V HDMI analog frontend power + + txavcc33-supply: + description: 3.3V HDMI analog frontend power + + pvcc1-supply: + description: 1.8V HDMI frontend core PLL power + + pvcc2-supply: + description: 1.8V HDMI frontend filter PLL power + + avcc-supply: + description: 3.3V LVDS frontend power + + anvdd-supply: + description: 1.8V LVDS frontend analog power + + apvdd-supply: + description: 1.8V LVDS frontend PLL power + + "#sound-dai-cells": + const: 0 + + ite,i2s-audio-fifo-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + enum: [0, 1, 2, 3] + description: + Each array element indicates the pin number of an I2S serial data input + line which is connected to an audio FIFO, from audio FIFO0 to FIFO3. + + ite,rl-channel-swap-audio-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [0, 1, 2, 3] + description: + Each array element indicates an audio source whose right channel and left + channel are swapped by this converter. For I2S, the element is the pin + number of an I2S serial data input line. For S/PDIF, the element is always + 0. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: true + + port@1: + oneOf: + - required: [dual-lvds-odd-pixels] + - required: [dual-lvds-even-pixels] + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: video port for the HDMI output + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: sound input port + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - data-mapping + - ivdd-supply + - ovdd-supply + - txavcc18-supply + - txavcc33-supply + - pvcc1-supply + - pvcc2-supply + - avcc-supply + - anvdd-supply + - apvdd-supply + +unevaluatedProperties: false + +examples: + - | + /* single-link LVDS input */ + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi@4c { + compatible = "ite,it6263"; + reg = <0x4c>; + data-mapping = "jeida-24"; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + ivdd-supply = <®_buck5>; + ovdd-supply = <®_vext_3v3>; + txavcc18-supply = <®_buck5>; + txavcc33-supply = <®_vext_3v3>; + pvcc1-supply = <®_buck5>; + pvcc2-supply = <®_buck5>; + avcc-supply = <®_vext_3v3>; + anvdd-supply = <®_buck5>; + apvdd-supply = <®_buck5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + it6263_lvds_link1: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + + port@2 { + reg = <2>; + + it6263_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + + - | + /* dual-link LVDS input */ + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi@4c { + compatible = "ite,it6263"; + reg = <0x4c>; + data-mapping = "jeida-24"; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + ivdd-supply = <®_buck5>; + ovdd-supply = <®_vext_3v3>; + txavcc18-supply = <®_buck5>; + txavcc33-supply = <®_vext_3v3>; + pvcc1-supply = <®_buck5>; + pvcc2-supply = <®_buck5>; + avcc-supply = <®_vext_3v3>; + anvdd-supply = <®_buck5>; + apvdd-supply = <®_buck5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + + it6263_lvds_link1_dual: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + + it6263_lvds_link2_dual: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + + port@2 { + reg = <2>; + + it6263_out_dual: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + };
Document ITE IT6263 LVDS to HDMI converter. Product link: https://www.ite.com.tw/en/product/cate1/IT6263 Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v4: * Require dual-lvds-odd-pixels or dual-lvds-even-pixels DT properties for port@1. * Drop "data-mirror: true"(30-bit LVDS data bit order is not reversed). v3: * Reference lvds-dual-ports.yaml. (Dmitry) * Add data-mapping DT property. (Dmitry, Biju) * Allow data-mirror. * Drop ite,lvds-link-num-data-lanes DT property. (Dmitry, Biju) v2: * Document number of LVDS link data lanes. (Biju) * Simplify ports property by dropping "oneOf". (Rob) .../bindings/display/bridge/ite,it6263.yaml | 250 ++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml