diff mbox series

[RESEND,v13,06/12] clk: mmp: Add Marvell PXA1908 APBCP driver

Message ID 20241104-pxa1908-lkml-v13-6-e050609b8d6c@skole.hr (mailing list archive)
State New
Headers show
Series Initial Marvell PXA1908 support | expand

Commit Message

Duje Mihanović via B4 Relay Nov. 4, 2024, 4:37 p.m. UTC
From: Duje Mihanović <duje.mihanovic@skole.hr>

Add driver for the APBCP controller block found on Marvell's PXA1908
SoC.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/Makefile            |  2 +-
 drivers/clk/mmp/clk-pxa1908-apbcp.c | 82 +++++++++++++++++++++++++++++++++++++
 2 files changed, 83 insertions(+), 1 deletion(-)

Comments

Stephen Boyd Nov. 14, 2024, 10:37 p.m. UTC | #1
Quoting Duje Mihanović via B4 Relay (2024-11-04 08:37:08)
> From: Duje Mihanović <duje.mihanovic@skole.hr>
> 
> Add driver for the APBCP controller block found on Marvell's PXA1908
> SoC.
> 
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> ---

Applied to clk-next
diff mbox series

Patch

diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 685bb80f8ae1f16d967dc4f6f5a6ce4e3f52d2bd..038bcd4d035e1807973f5094db5565fe437e0650 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@  obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
 obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
 obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
 
-obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o
diff --git a/drivers/clk/mmp/clk-pxa1908-apbcp.c b/drivers/clk/mmp/clk-pxa1908-apbcp.c
new file mode 100644
index 0000000000000000000000000000000000000000..08f3845cbb1becfa08e82e6e7fd8cb8aac7a0385
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa1908-apbcp.c
@@ -0,0 +1,82 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APBCP_UART2		0x1c
+#define APBCP_TWSI2		0x28
+#define APBCP_AICER		0x38
+
+#define APBCP_NR_CLKS		4
+
+struct pxa1908_clk_unit {
+	struct mmp_clk_unit unit;
+	void __iomem *base;
+};
+
+static DEFINE_SPINLOCK(uart2_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+
+static struct mmp_param_gate_clk apbcp_gate_clks[] = {
+	{PXA1908_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+	{PXA1908_CLK_TWSI2, "twsi2_clk", "pll1_32", CLK_SET_RATE_PARENT, APBCP_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+	{PXA1908_CLK_AICER, "ripc_clk", NULL, 0, APBCP_AICER, 0x7, 0x2, 0x0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbcp_mux_clks[] = {
+	{0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
+};
+
+static void pxa1908_apb_p_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->base,
+			ARRAY_SIZE(apbcp_mux_clks));
+	mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->base,
+			ARRAY_SIZE(apbcp_gate_clks));
+}
+
+static int pxa1908_apbcp_probe(struct platform_device *pdev)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = devm_kzalloc(&pdev->dev, sizeof(*pxa_unit), GFP_KERNEL);
+	if (IS_ERR(pxa_unit))
+		return PTR_ERR(pxa_unit);
+
+	pxa_unit->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pxa_unit->base))
+		return PTR_ERR(pxa_unit->base);
+
+	mmp_clk_init(pdev->dev.of_node, &pxa_unit->unit, APBCP_NR_CLKS);
+
+	pxa1908_apb_p_periph_clk_init(pxa_unit);
+
+	return 0;
+}
+
+static const struct of_device_id pxa1908_apbcp_match_table[] = {
+	{ .compatible = "marvell,pxa1908-apbcp" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pxa1908_apbcp_match_table);
+
+static struct platform_driver pxa1908_apbcp_driver = {
+	.probe = pxa1908_apbcp_probe,
+	.driver = {
+		.name = "pxa1908-apbcp",
+		.of_match_table = pxa1908_apbcp_match_table
+	}
+};
+module_platform_driver(pxa1908_apbcp_driver);
+
+MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>");
+MODULE_DESCRIPTION("Marvell PXA1908 APBCP Clock Driver");
+MODULE_LICENSE("GPL");