diff mbox series

[net-next,v2,5/8] net: sparx5: verify RGMII speeds

Message ID 20241113-sparx5-lan969x-switch-driver-4-v2-5-0db98ac096d1@microchip.com (mailing list archive)
State New
Headers show
Series net: lan969x: add RGMII support | expand

Commit Message

Daniel Machon Nov. 13, 2024, 9:11 p.m. UTC 
When doing a port config, we verify the port speed against the PHY mode
and supported speeds of that PHY mode.

Add checks for the four RGMII phy modes: RGMII, RGMII_ID, RGMII_TXID and
RGMII_RXID.

Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
---
 drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
index b494970752fd..9f0f687bd994 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
@@ -257,6 +257,15 @@  static int sparx5_port_verify_speed(struct sparx5 *sparx5,
 		     conf->speed != SPEED_25000))
 			return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
 		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		if (conf->speed != SPEED_1000 &&
+		    conf->speed != SPEED_100 &&
+		    conf->speed != SPEED_10)
+			return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
+		break;
 	default:
 		return sparx5_port_error(port, conf, SPX5_PERR_IFTYPE);
 	}