@@ -201,8 +201,6 @@ cpsw3g_phy0: ethernet-phy@0 {
reset-gpios = <&main_gpio0 44 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
- ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
@@ -230,8 +228,6 @@ icssg1_phy03: ethernet-phy@3 {
reset-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
- ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
@@ -242,8 +238,6 @@ icssg1_phy0c: ethernet-phy@c {
reset-gpios = <&main_gpio1 51 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
- ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
Remove "ti,(rx|tx)-fifo-depth" properties which are both unused in the kernel and undocumented. Most likely they are leftovers from downstream. There are similar properties, but DP83867_PHYCR_FIFO_DEPTH_4_B_NIB represents the default value so adding them is not necessary. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> --- arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 6 ------ 1 file changed, 6 deletions(-)