diff mbox series

[v1,06/10] drm/bridge: analogix_dp: Add support for phy configuration.

Message ID 20241127075157.856029-7-damon.ding@rock-chips.com (mailing list archive)
State New
Headers show
Series Add eDP support for RK3588 | expand

Commit Message

Damon Ding Nov. 27, 2024, 7:51 a.m. UTC 
Add support to configurate link rate, lane count, voltage swing and
pre-emphasis with phy_configure(). It is helpful in application scenarios
where analogix controller is mixed with the phy of other vendors.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
 .../drm/bridge/analogix/analogix_dp_core.c    |  4 +-
 .../drm/bridge/analogix/analogix_dp_core.h    |  2 +
 .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 90 +++++++++++++++++++
 3 files changed, 94 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6f10d88a34c5..7624ed13cdbf 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1672,7 +1672,7 @@  EXPORT_SYMBOL_GPL(analogix_dp_probe);
 
 int analogix_dp_suspend(struct analogix_dp_device *dp)
 {
-	phy_power_off(dp->phy);
+	analogix_dp_phy_power_off(dp);
 
 	if (dp->plat_data->power_off)
 		dp->plat_data->power_off(dp->plat_data);
@@ -1696,7 +1696,7 @@  int analogix_dp_resume(struct analogix_dp_device *dp)
 	if (dp->plat_data->power_on)
 		dp->plat_data->power_on(dp->plat_data);
 
-	phy_power_on(dp->phy);
+	analogix_dp_phy_power_on(dp);
 
 	analogix_dp_init_dp(dp);
 
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 774d11574b09..a76079d61768 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -232,5 +232,7 @@  int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
 			     struct dp_sdp *vsc, bool blocking);
 ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
 			     struct drm_dp_aux_msg *msg);
+void analogix_dp_phy_power_on(struct analogix_dp_device *dp);
+void analogix_dp_phy_power_off(struct analogix_dp_device *dp);
 
 #endif /* _ANALOGIX_DP_CORE_H */
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 3afc73c858c4..809bb0c72d18 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -11,6 +11,7 @@ 
 #include <linux/gpio/consumer.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
+#include <linux/phy/phy.h>
 
 #include <drm/bridge/analogix_dp.h>
 
@@ -513,10 +514,27 @@  void analogix_dp_enable_sw_function(struct analogix_dp_device *dp)
 void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
 {
 	u32 reg;
+	int ret;
 
 	reg = bwtype;
 	if ((bwtype == DP_LINK_BW_2_7) || (bwtype == DP_LINK_BW_1_62))
 		writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+
+	if (dp->phy) {
+		union phy_configure_opts phy_cfg = {0};
+
+		phy_cfg.dp.lanes = dp->link_train.lane_count;
+		phy_cfg.dp.link_rate =
+			drm_dp_bw_code_to_link_rate(dp->link_train.link_rate) / 100;
+		phy_cfg.dp.set_lanes = false;
+		phy_cfg.dp.set_rate = true;
+		phy_cfg.dp.set_voltages = false;
+		ret = phy_configure(dp->phy, &phy_cfg);
+		if (ret && ret != -EOPNOTSUPP) {
+			dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret);
+			return;
+		}
+	}
 }
 
 void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype)
@@ -530,9 +548,24 @@  void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype)
 void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count)
 {
 	u32 reg;
+	int ret;
 
 	reg = count;
 	writel(reg, dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+
+	if (dp->phy) {
+		union phy_configure_opts phy_cfg = {0};
+
+		phy_cfg.dp.lanes = dp->link_train.lane_count;
+		phy_cfg.dp.set_lanes = true;
+		phy_cfg.dp.set_rate = false;
+		phy_cfg.dp.set_voltages = false;
+		ret = phy_configure(dp->phy, &phy_cfg);
+		if (ret && ret != -EOPNOTSUPP) {
+			dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret);
+			return;
+		}
+	}
 }
 
 void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
@@ -546,10 +579,39 @@  void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
 void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp)
 {
 	u8 lane;
+	int ret;
 
 	for (lane = 0; lane < dp->link_train.lane_count; lane++)
 		writel(dp->link_train.training_lane[lane],
 		       dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL + 4 * lane);
+
+	if (dp->phy) {
+		union phy_configure_opts phy_cfg = {0};
+
+		for (lane = 0; lane < dp->link_train.lane_count; lane++) {
+			u8 training_lane = dp->link_train.training_lane[lane];
+			u8 vs, pe;
+
+			vs = (training_lane & DP_TRAIN_VOLTAGE_SWING_MASK) >>
+			     DP_TRAIN_VOLTAGE_SWING_SHIFT;
+			pe = (training_lane & DP_TRAIN_PRE_EMPHASIS_MASK) >>
+			     DP_TRAIN_PRE_EMPHASIS_SHIFT;
+			phy_cfg.dp.voltage[lane] = vs;
+			phy_cfg.dp.pre[lane] = pe;
+		}
+
+		phy_cfg.dp.lanes = dp->link_train.lane_count;
+		phy_cfg.dp.link_rate =
+			drm_dp_bw_code_to_link_rate(dp->link_train.link_rate) / 100;
+		phy_cfg.dp.set_lanes = false;
+		phy_cfg.dp.set_rate = false;
+		phy_cfg.dp.set_voltages = true;
+		ret = phy_configure(dp->phy, &phy_cfg);
+		if (ret && ret != -EOPNOTSUPP) {
+			dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret);
+			return;
+		}
+	}
 }
 
 u32 analogix_dp_get_lane_link_training(struct analogix_dp_device *dp, u8 lane)
@@ -1053,3 +1115,31 @@  ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
 
 	return -EREMOTEIO;
 }
+
+void analogix_dp_phy_power_on(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	ret = phy_set_mode(dp->phy, PHY_MODE_DP);
+	if (ret) {
+		dev_err(dp->dev, "%s: phy_set_mode() failed: %d\n", __func__, ret);
+		return;
+	}
+
+	ret = phy_power_on(dp->phy);
+	if (ret) {
+		dev_err(dp->dev, "%s: phy_power_on() failed: %d\n", __func__, ret);
+		return;
+	}
+}
+
+void analogix_dp_phy_power_off(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	ret = phy_power_off(dp->phy);
+	if (ret) {
+		dev_err(dp->dev, "%s: phy_power_off() failed: %d\n", __func__, ret);
+		return;
+	}
+}