new file mode 100644
@@ -0,0 +1,240 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller
+
+description: |
+ The Freescale i.MX8qxp Display Controller(DC) is comprised of three main
+ components that include a blit engine for 2D graphics accelerations, display
+ controller for display output processing, as well as a command sequencer.
+
+ Display buffers Source buffers
+ (AXI read master) (AXI read master)
+ | .......... | | | |
+ +---------------------------+------------+------------------+-+-+------+
+ | Display Controller (DC) | .......... | | | | |
+ | | | | | | |
+ | @@@@@@@@@@@ +----------+------------+------------+ | | | |
+ A | | Command | | V V | | | | |
+ X <-+->| Sequencer | | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | V V V |
+ I | | (AXI CLK) | | | | | @@@@@@@@@@ |
+ | @@@@@@@@@@@ | | Pixel Engine | | | | |
+ | | | | (AXI CLK) | | | | |
+ | V | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | | | |
+ A | *********** | | | | | | | Blit | |
+ H <-+->| Configure | | V V V V | | Engine | |
+ B | | (CFG CLK) | | 00000000000 11111111111 | | (AXI CLK)| |
+ | *********** | | Display | | Display | | | | |
+ | | | Engine | | Engine | | | | |
+ | | | (Disp CLK)| | (Disp CLK)| | | | |
+ | @@@@@@@@@@@ | 00000000000 11111111111 | @@@@@@@@@@ |
+ I | | Common | | | | | | |
+ R <-+--| Control | | | Display | | | |
+ Q | | (AXI CLK) | | | Controller | | | |
+ | @@@@@@@@@@@ +------------------------------------+ | |
+ | | | ^ | |
+ +--------------------------+----------------+-------+---------+--------+
+ ^ | | | |
+ | V V | V
+ Clocks & Resets Display Display Panic Destination
+ Output0 Output1 Control buffer
+ (AXI write master)
+
+ Each Display Controller device should have an alias in the aliases node, in
+ the form of dc<x>, where <x> is an integer specifying the Display Controller
+ instance.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: axi
+ - const: cfg
+
+ power-domains:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^command-sequencer@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-command-sequencer
+
+ "^display-engine@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-display-engine
+
+ "^interrupt-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-intc
+
+ "^pixel-engine@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-pixel-engine
+
+ "^pmu@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-axi-performance-counter
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ display-controller@56180000 {
+ compatible = "fsl,imx8qxp-dc";
+ reg = <0x56180000 0x40000>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_4>;
+ power-domains = <&pd IMX_SC_R_DC_0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-controller@56180040 {
+ compatible = "fsl,imx8qxp-dc-intc";
+ reg = <0x56180040 0x60>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ interrupt-controller;
+ interrupt-parent = <&dc0_irqsteer>;
+ #interrupt-cells = <1>;
+ interrupts = <448>, <449>, <450>, <64>,
+ <65>, <66>, <67>, <68>,
+ <69>, <70>, <193>, <194>,
+ <195>, <196>, <197>, <72>,
+ <73>, <74>, <75>, <76>,
+ <77>, <78>, <79>, <80>,
+ <81>, <199>, <200>, <201>,
+ <202>, <203>, <204>, <205>,
+ <206>, <207>, <208>, <5>,
+ <0>, <1>, <2>, <3>,
+ <4>, <82>, <83>, <84>,
+ <85>, <209>, <210>, <211>,
+ <212>;
+ interrupt-names = "store9_shdload",
+ "store9_framecomplete",
+ "store9_seqcomplete",
+ "extdst0_shdload",
+ "extdst0_framecomplete",
+ "extdst0_seqcomplete",
+ "extdst4_shdload",
+ "extdst4_framecomplete",
+ "extdst4_seqcomplete",
+ "extdst1_shdload",
+ "extdst1_framecomplete",
+ "extdst1_seqcomplete",
+ "extdst5_shdload",
+ "extdst5_framecomplete",
+ "extdst5_seqcomplete",
+ "disengcfg_shdload0",
+ "disengcfg_framecomplete0",
+ "disengcfg_seqcomplete0",
+ "framegen0_int0",
+ "framegen0_int1",
+ "framegen0_int2",
+ "framegen0_int3",
+ "sig0_shdload",
+ "sig0_valid",
+ "sig0_error",
+ "disengcfg_shdload1",
+ "disengcfg_framecomplete1",
+ "disengcfg_seqcomplete1",
+ "framegen1_int0",
+ "framegen1_int1",
+ "framegen1_int2",
+ "framegen1_int3",
+ "sig1_shdload",
+ "sig1_valid",
+ "sig1_error",
+ "reserved",
+ "cmdseq_error",
+ "comctrl_sw0",
+ "comctrl_sw1",
+ "comctrl_sw2",
+ "comctrl_sw3",
+ "framegen0_primsync_on",
+ "framegen0_primsync_off",
+ "framegen0_secsync_on",
+ "framegen0_secsync_off",
+ "framegen1_primsync_on",
+ "framegen1_primsync_off",
+ "framegen1_secsync_on",
+ "framegen1_secsync_off";
+ };
+
+ pixel-engine@56180800 {
+ compatible = "fsl,imx8qxp-dc-pixel-engine";
+ reg = <0x56180800 0xac00>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
+ display-engine@5618b400 {
+ compatible = "fsl,imx8qxp-dc-display-engine";
+ reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>;
+ reg-names = "top", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <15>, <16>, <17>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ power-domains = <&pd IMX_SC_R_DC_0_PLL_0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+ };
i.MX8qxp Display Controller(DC) is comprised of three main components that include a blit engine for 2D graphics accelerations, display controller for display output processing, as well as a command sequencer. Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v5: * Document aliases. Drop Rob's previous R-b tag. (Maxime) v4: * Collect Rob's R-b tag. v3: * No change. v2: * Drop fsl,dc-*-id DT properties from example. (Krzysztof) * Use generic pmu pattern property. (Krzysztof) .../bindings/display/imx/fsl,imx8qxp-dc.yaml | 240 ++++++++++++++++++ 1 file changed, 240 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml