diff mbox series

[PATCHv3,2/2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1

Message ID 20241202143331.126800-2-romain.naour@smile.fr (mailing list archive)
State New
Headers show
Series [PATCHv3,1/2] dt-bindings: mfd: syscon: Add ti,j721e-acspcie-proxy-ctrl compatible | expand

Commit Message

Romain Naour Dec. 2, 2024, 2:33 p.m. UTC 
From: Romain Naour <romain.naour@skf.com>

Unlike the SK-TDA4VM (k3-j721e-sk) board, there is no clock generator
(CDCI6214RGET) on the BeagleBone AI-64 (k3-j721e-beagleboneai64) to
provide PCIe refclk signal to PCIe Endponts. So the ACSPCIE module must
provide refclk through PCIe_REFCLK pins.

Use the new "ti,syscon-acspcie-proxy-ctrl" property to enable ACSPCIE
module's PAD IO Buffers.

Cc: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Romain Naour <romain.naour@skf.com>
---
With this patch, we can remove "HACK: Sierra: Drive clock out" patch
applied on vendor kernel for BeagleBone AI-64:
https://openbeagle.org/beagleboard/linux/-/commit/ad65d7ef675966cdbc5d75f2bd545fad1914ba9b

v3:
 - update "acspcie0_proxy_ctrl" compatible to "ti,j721e-acspcie-proxy-ctrl"
   since this property is specific to j721e variant.

v2:
 - use generic style comments
 - use "syscon" as generic node name for "acspcie0_proxy_ctrl" node
 - Keep the compatible "ti,j784s4-acspcie-proxy-ctrl" since the
   ACSPCIE buffer and its functionality is the same across all K3 SoCs.
   (Siddharth Vadapalli)

   "The compatible "ti,j784s4-acspcie-pcie-ctrl" should be reused for
   J721E and all other K3 SoCs.
   For example, see:
   https://lore.kernel.org/r/20240402105708.4114146-1-s-vadapalli@ti.com/
   which introduced "ti,am62p-cpsw-mac-efuse" compatible.

   The same compatible is reused across all K3 SoCs:
   https://lore.kernel.org/r/20240628151518.40100-1-afd@ti.com/ "
---
 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts |  5 +++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi          | 10 ++++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index fb899c99753e..741ad2ba6fdb 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -859,6 +859,11 @@  &pcie1_rc {
 	num-lanes = <2>;
 	max-link-speed = <3>;
 	reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>;
+	/*
+	 * There is no on-board or external reference clock generators,
+	 * use refclk from the ACSPCIE module's PAD IO Buffers.
+	 */
+	ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>;
 };
 
 &ufs_wrapper {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index af3d730154ac..32a232a90100 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -5,6 +5,7 @@ 
  * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-cadence.h>
 #include <dt-bindings/phy/phy-ti.h>
 #include <dt-bindings/mux/mux.h>
 
@@ -82,6 +83,11 @@  ehrpwm_tbclk: clock-controller@4140 {
 			reg = <0x4140 0x18>;
 			#clock-cells = <1>;
 		};
+
+		acspcie0_proxy_ctrl: syscon@18090 {
+			compatible = "ti,j721e-acspcie-proxy-ctrl", "syscon";
+			reg = <0x18090 0x4>;
+		};
 	};
 
 	main_ehrpwm0: pwm@3000000 {
@@ -979,8 +985,8 @@  pcie1_rc: pcie@2910000 {
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 240 1>;
-		clock-names = "fck";
+		clocks = <&k3_clks 240 1>, <&serdes1 CDNS_SIERRA_DERIVED_REFCLK>;
+		clock-names = "fck", "pcie_refclk";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		bus-range = <0x0 0xff>;