@@ -180,20 +180,18 @@ MODULE_DEVICE_TABLE(acpi, hisi_cpa_pmu_acpi_match);
static int hisi_cpa_pmu_init_data(struct platform_device *pdev,
struct hisi_pmu *cpa_pmu)
{
- if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id",
- &cpa_pmu->topo.sicl_id)) {
+ hisi_uncore_pmu_init_topology(cpa_pmu, &pdev->dev);
+
+ if (cpa_pmu->topo.sicl_id < 0) {
dev_err(&pdev->dev, "Can not read sicl-id\n");
return -EINVAL;
}
- if (device_property_read_u32(&pdev->dev, "hisilicon,idx-id",
- &cpa_pmu->topo.index_id)) {
+ if (cpa_pmu->topo.index_id < 0) {
dev_err(&pdev->dev, "Cannot read idx-id\n");
return -EINVAL;
}
- cpa_pmu->topo.ccl_id = -1;
- cpa_pmu->topo.sccl_id = -1;
cpa_pmu->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(cpa_pmu->base))
return PTR_ERR(cpa_pmu->base);
@@ -297,6 +297,8 @@ MODULE_DEVICE_TABLE(acpi, hisi_ddrc_pmu_acpi_match);
static int hisi_ddrc_pmu_init_data(struct platform_device *pdev,
struct hisi_pmu *ddrc_pmu)
{
+ hisi_uncore_pmu_init_topology(ddrc_pmu, &pdev->dev);
+
/*
* Use the SCCL_ID and DDRC channel ID to identify the
* DDRC PMU, while SCCL_ID is in MPIDR[aff2].
@@ -307,13 +309,10 @@ static int hisi_ddrc_pmu_init_data(struct platform_device *pdev,
return -EINVAL;
}
- if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id",
- &ddrc_pmu->topo.sccl_id)) {
+ if (ddrc_pmu->topo.sccl_id < 0) {
dev_err(&pdev->dev, "Can not read ddrc sccl-id!\n");
return -EINVAL;
}
- /* DDRC PMUs only share the same SCCL */
- ddrc_pmu->topo.ccl_id = -1;
ddrc_pmu->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(ddrc_pmu->base)) {
@@ -323,8 +322,7 @@ static int hisi_ddrc_pmu_init_data(struct platform_device *pdev,
ddrc_pmu->identifier = readl(ddrc_pmu->base + DDRC_VERSION);
if (ddrc_pmu->identifier >= HISI_PMU_V2) {
- if (device_property_read_u32(&pdev->dev, "hisilicon,sub-id",
- &ddrc_pmu->topo.sub_id)) {
+ if (ddrc_pmu->topo.sub_id < 0) {
dev_err(&pdev->dev, "Can not read sub-id!\n");
return -EINVAL;
}
@@ -295,12 +295,13 @@ static int hisi_hha_pmu_init_data(struct platform_device *pdev,
unsigned long long id;
acpi_status status;
+ hisi_uncore_pmu_init_topology(hha_pmu, &pdev->dev);
+
/*
* Use SCCL_ID and UID to identify the HHA PMU, while
* SCCL_ID is in MPIDR[aff2].
*/
- if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id",
- &hha_pmu->topo.sccl_id)) {
+ if (hha_pmu->topo.sccl_id < 0) {
dev_err(&pdev->dev, "Can not read hha sccl-id!\n");
return -EINVAL;
}
@@ -309,8 +310,7 @@ static int hisi_hha_pmu_init_data(struct platform_device *pdev,
* Early versions of BIOS support _UID by mistake, so we support
* both "hisilicon, idx-id" as preference, if available.
*/
- if (device_property_read_u32(&pdev->dev, "hisilicon,idx-id",
- &hha_pmu->topo.index_id)) {
+ if (hha_pmu->topo.index_id < 0) {
status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev),
"_UID", NULL, &id);
if (ACPI_FAILURE(status)) {
@@ -320,8 +320,6 @@ static int hisi_hha_pmu_init_data(struct platform_device *pdev,
hha_pmu->topo.index_id = id;
}
- /* HHA PMUs only share the same SCCL */
- hha_pmu->topo.ccl_id = -1;
hha_pmu->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hha_pmu->base)) {
@@ -355,18 +355,18 @@ MODULE_DEVICE_TABLE(acpi, hisi_l3c_pmu_acpi_match);
static int hisi_l3c_pmu_init_data(struct platform_device *pdev,
struct hisi_pmu *l3c_pmu)
{
+ hisi_uncore_pmu_init_topology(l3c_pmu, &pdev->dev);
+
/*
* Use the SCCL_ID and CCL_ID to identify the L3C PMU, while
* SCCL_ID is in MPIDR[aff2] and CCL_ID is in MPIDR[aff1].
*/
- if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id",
- &l3c_pmu->topo.sccl_id)) {
+ if (l3c_pmu->topo.sccl_id < 0) {
dev_err(&pdev->dev, "Can not read l3c sccl-id!\n");
return -EINVAL;
}
- if (device_property_read_u32(&pdev->dev, "hisilicon,ccl-id",
- &l3c_pmu->topo.ccl_id)) {
+ if (l3c_pmu->topo.ccl_id < 0) {
dev_err(&pdev->dev, "Can not read l3c ccl-id!\n");
return -EINVAL;
}
@@ -269,25 +269,22 @@ static void hisi_pa_pmu_clear_int_status(struct hisi_pmu *pa_pmu, int idx)
static int hisi_pa_pmu_init_data(struct platform_device *pdev,
struct hisi_pmu *pa_pmu)
{
+ hisi_uncore_pmu_init_topology(pa_pmu, &pdev->dev);
+
/*
* As PA PMU is in a SICL, use the SICL_ID and the index ID
* to identify the PA PMU.
*/
- if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id",
- &pa_pmu->topo.sicl_id)) {
+ if (pa_pmu->topo.sicl_id < 0) {
dev_err(&pdev->dev, "Cannot read sicl-id!\n");
return -EINVAL;
}
- if (device_property_read_u32(&pdev->dev, "hisilicon,idx-id",
- &pa_pmu->topo.index_id)) {
+ if (pa_pmu->topo.index_id < 0) {
dev_err(&pdev->dev, "Cannot read idx-id!\n");
return -EINVAL;
}
- pa_pmu->topo.ccl_id = -1;
- pa_pmu->topo.sccl_id = -1;
-
pa_pmu->dev_info = device_get_match_data(&pdev->dev);
if (!pa_pmu->dev_info)
return -ENODEV;
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
+#include <linux/property.h>
#include <asm/cputype.h>
#include <asm/local64.h>
@@ -530,6 +531,35 @@ int hisi_uncore_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
}
EXPORT_SYMBOL_NS_GPL(hisi_uncore_pmu_offline_cpu, HISI_PMU);
+/*
+ * Retrieve the topology information from the firmware for the hisi_pmu device.
+ * The topology ID will be -1 if we cannot initialize it, it may either due to
+ * the PMU doesn't locate on this certain topology or the firmware needs to be
+ * fixed.
+ */
+void hisi_uncore_pmu_init_topology(struct hisi_pmu *hisi_pmu, struct device *dev)
+{
+ struct hisi_pmu_topology *topo = &hisi_pmu->topo;
+
+ topo->sccl_id = -1;
+ topo->ccl_id = -1;
+ topo->index_id = -1;
+ topo->sub_id = -1;
+
+ if (device_property_read_u32(dev, "hisilicon,scl-id", &topo->sccl_id))
+ dev_dbg(dev, "no scl-id present\n");
+
+ if (device_property_read_u32(dev, "hisilicon,ccl-id", &topo->ccl_id))
+ dev_dbg(dev, "no ccl-id present\n");
+
+ if (device_property_read_u32(dev, "hisilicon,idx-id", &topo->index_id))
+ dev_dbg(dev, "no idx-id present\n");
+
+ if (device_property_read_u32(dev, "hisilicon,sub-id", &topo->sub_id))
+ dev_dbg(dev, "no sub-id present\n");
+}
+EXPORT_SYMBOL_NS_GPL(hisi_uncore_pmu_init_topology, HISI_PMU);
+
void hisi_pmu_init(struct hisi_pmu *hisi_pmu, struct module *module)
{
struct pmu *pmu = &hisi_pmu->pmu;
@@ -160,6 +160,7 @@ ssize_t hisi_uncore_pmu_identifier_attr_show(struct device *dev,
char *page);
int hisi_uncore_pmu_init_irq(struct hisi_pmu *hisi_pmu,
struct platform_device *pdev);
+void hisi_uncore_pmu_init_topology(struct hisi_pmu *hisi_pmu, struct device *dev);
void hisi_pmu_init(struct hisi_pmu *hisi_pmu, struct module *module);
#endif /* __HISI_UNCORE_PMU_H__ */
@@ -288,25 +288,22 @@ MODULE_DEVICE_TABLE(acpi, hisi_sllc_pmu_acpi_match);
static int hisi_sllc_pmu_init_data(struct platform_device *pdev,
struct hisi_pmu *sllc_pmu)
{
+ hisi_uncore_pmu_init_topology(sllc_pmu, &pdev->dev);
+
/*
* Use the SCCL_ID and the index ID to identify the SLLC PMU,
* while SCCL_ID is from MPIDR_EL1 by CPU.
*/
- if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id",
- &sllc_pmu->topo.sccl_id)) {
+ if (sllc_pmu->topo.sccl_id < 0) {
dev_err(&pdev->dev, "Cannot read sccl-id!\n");
return -EINVAL;
}
- if (device_property_read_u32(&pdev->dev, "hisilicon,idx-id",
- &sllc_pmu->topo.index_id)) {
+ if (sllc_pmu->topo.index_id < 0) {
dev_err(&pdev->dev, "Cannot read idx-id!\n");
return -EINVAL;
}
- /* SLLC PMUs only share the same SCCL */
- sllc_pmu->topo.ccl_id = -1;
-
sllc_pmu->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(sllc_pmu->base)) {
dev_err(&pdev->dev, "ioremap failed for sllc_pmu resource.\n");
@@ -11,7 +11,6 @@
#include <linux/irq.h>
#include <linux/list.h>
#include <linux/mod_devicetable.h>
-#include <linux/property.h>
#include "hisi_uncore_pmu.h"
@@ -366,25 +365,24 @@ static void hisi_uc_pmu_clear_int_status(struct hisi_pmu *uc_pmu, int idx)
static int hisi_uc_pmu_init_data(struct platform_device *pdev,
struct hisi_pmu *uc_pmu)
{
+ hisi_uncore_pmu_init_topology(uc_pmu, &pdev->dev);
+
/*
* Use SCCL (Super CPU Cluster) ID and CCL (CPU Cluster) ID to
* identify the topology information of UC PMU devices in the chip.
* They have some CCLs per SCCL and then 4 UC PMU per CCL.
*/
- if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id",
- &uc_pmu->topo.sccl_id)) {
+ if (uc_pmu->topo.sccl_id < 0) {
dev_err(&pdev->dev, "Can not read uc sccl-id!\n");
return -EINVAL;
}
- if (device_property_read_u32(&pdev->dev, "hisilicon,ccl-id",
- &uc_pmu->topo.ccl_id)) {
+ if (uc_pmu->topo.ccl_id < 0) {
dev_err(&pdev->dev, "Can not read uc ccl-id!\n");
return -EINVAL;
}
- if (device_property_read_u32(&pdev->dev, "hisilicon,sub-id",
- &uc_pmu->topo.sub_id)) {
+ if (uc_pmu->topo.sub_id < 0) {
dev_err(&pdev->dev, "Can not read sub-id!\n");
return -EINVAL;
}