@@ -208,6 +208,63 @@ leds_gpio: gpio@19 {
gpio-controller;
#gpio-cells = <2>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <238 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "PWRGD_P24V_SMPWROK", "P1V5_PWROK",
+ "P3V3_PWROK", "P5V_PWROK",
+ "P12V_SCM_PWROK", "P12V_PWROK",
+ "P24V_PWROK", "P48V_HSC_PWROK",
+ "ERR_GPIO_IRQ", "TMP75_ALERT_N",
+ "BMC_PWROK", "P12V_INA230_ALERT_N",
+ "P24V_INA230_ALERT_N","",
+ "P48V_HSC_ALERT_N", "P1V05_PWROK";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <240 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P1V05_PWR_FAIL", "P1V5_PWR_FAIL",
+ "P24V_PWR_FAIL", "P24V_SM_PWR_FAIL",
+ "IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N",
+ "RTC_INT_N_R", "ERR_GPIO_IRQ",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <242 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "RACKMON_A_1", "RACKMON_A_2",
+ "RACKMON_B_1", "RACKMON_B_2",
+ "", "",
+ "", "";
+ };
};
&i2c1 {
Add three I/O expanders on i2c bus 0, assign the GPIO line name to each GPIO in use, and specify the interrupt GPIO that has been used on it and give the interrupt gpio number. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> --- .../aspeed/aspeed-bmc-facebook-minerva.dts | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+)