[v1,2/4] ARM: dts: aspeed: minerva: add i/o expanders on each FCB

Message ID	20241212133226.342937-3-yangchen.openbmc@gmail.com (mailing list archive)
State	New
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Yang Chen <yangchen.openbmc@gmail.com> To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, andrew@codeconstruct.com.au, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, patrick@stwcx.xyz, amithash@meta.com Cc: Jerry.Lin@quantatw.com, yang.chen@quantatw.com Subject: [PATCH v1 2/4] ARM: dts: aspeed: minerva: add i/o expanders on each FCB Date: Thu, 12 Dec 2024 21:32:24 +0800 Message-Id: <20241212133226.342937-3-yangchen.openbmc@gmail.com> In-Reply-To: <20241212133226.342937-1-yangchen.openbmc@gmail.com> References: <20241212133226.342937-1-yangchen.openbmc@gmail.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: list Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	Revise Meta (Facebook) Minerva BMC \| expand [v1,0/4] Revise Meta (Facebook) Minerva BMC [v1,1/4] ARM: dts: aspeed: minerva: add i/o expanders on bus 0 [v1,2/4] ARM: dts: aspeed: minerva: add i/o expanders on each FCB [v1,3/4] ARM: dts: aspeed: minerva: add bmc ready led setting [v1,4/4] ARM: dts: aspeed: minerva: add second source RTC

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts index 426e249c3326..9cd225ae96cb 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts @@ -342,6 +342,82 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <218 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R", + "P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R", + "FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R", + "FCB_1_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <218 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N", + "INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N", + "FCB_1_TMP75_ALERT_N", "", + "", "", + "FAN1_PRSNT", "FAN2_PRSNT", + "FAN3_PRSNT", "FAN4_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <218 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT", + "FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT", + "FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT", + "FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <218 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL", + "FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL", + "FAN2_POWER_FAIL", "FAN3_POWER_FAIL", + "FAN4_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; }; // FCB 2 imux17: i2c@0 { @@ -389,6 +465,82 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <220 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R", + "P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R", + "FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R", + "FCB_2_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <220 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N", + "INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N", + "FCB_2_TMP75_ALERT_N", "", + "", "", + "FAN5_PRSNT", "FAN6_PRSNT", + "FAN7_PRSNT", "FAN8_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <220 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT", + "FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT", + "FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT", + "FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <220 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL", + "FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL", + "FAN6_POWER_FAIL", "FAN7_POWER_FAIL", + "FAN8_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; }; // FCB 3 imux18: i2c@3 { @@ -436,6 +588,82 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <230 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R", + "P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R", + "FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R", + "FCB_3_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <230 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N", + "INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N", + "FCB_3_TMP75_ALERT_N", "", + "", "", + "FAN9_PRSNT", "FAN10_PRSNT", + "FAN11_PRSNT", "FAN12_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <230 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT", + "FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT", + "FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT", + "FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <230 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL", + "FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL", + "FAN10_POWER_FAIL", "FAN11_POWER_FAIL", + "FAN12_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; }; // FCB 4 imux19: i2c@2 { @@ -483,6 +711,82 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <232 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R", + "P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R", + "FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R", + "FCB_4_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <232 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N", + "INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N", + "FCB_4_TMP75_ALERT_N", "", + "", "", + "FAN13_PRSNT", "FAN14_PRSNT", + "FAN15_PRSNT", "FAN16_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <232 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT", + "FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT", + "FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT", + "FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <232 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL", + "FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL", + "FAN14_POWER_FAIL", "FAN15_POWER_FAIL", + "FAN16_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; }; // FCB 5 imux20: i2c@4 { @@ -529,6 +833,82 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <254 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R", + "P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R", + "FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R", + "FCB_5_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <254 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N", + "INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N", + "FCB_5_TMP75_ALERT_N", "", + "", "", + "FAN20_PRSNT", "FAN19_PRSNT", + "FAN18_PRSNT", "FAN17_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <254 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT", + "FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT", + "FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT", + "FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <254 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL", + "FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL", + "FAN19_POWER_FAIL", "FAN18_POWER_FAIL", + "FAN17_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; }; // FCB 6 imux21: i2c@5 { @@ -575,6 +955,82 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <252 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R", + "P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R", + "FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R", + "FCB_6_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <252 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N", + "INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N", + "FCB_6_TMP75_ALERT_N", "", + "", "", + "FAN24_PRSNT", "FAN23_PRSNT", + "FAN22_PRSNT", "FAN21_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <252 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT", + "FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT", + "FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT", + "FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <252 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL", + "FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL", + "FAN23_POWER_FAIL", "FAN22_POWER_FAIL", + "FAN21_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; }; imux22: i2c@6 {

[v1,2/4] ARM: dts: aspeed: minerva: add i/o expanders on each FCB

Commit Message

Patch