@@ -373,6 +373,158 @@ mmc0: mmc@11230000 {
status = "disabled";
};
+ pcie@11280000 {
+ compatible = "mediatek,mt7986-pcie",
+ "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0 0x11280000 0 0x2000>;
+ reg-names = "pcie-mac";
+ linux,pci-domain = <3>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0x00 0x20000000 0x00
+ 0x20000000 0x00 0x00200000>,
+ <0x82000000 0x00 0x20200000 0x00
+ 0x20200000 0x00 0x07e00000>;
+ clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P2>,
+ <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P2>,
+ <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P2>,
+ <&infracfg CLK_INFRA_133M_PCIE_CK_P2>;
+ clock-names = "pl_250m", "tl_26m", "peri_26m",
+ "top_133m";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_pins>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc2 0>,
+ <0 0 0 2 &pcie_intc2 1>,
+ <0 0 0 3 &pcie_intc2 2>,
+ <0 0 0 4 &pcie_intc2 3>;
+ pcie_intc2: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ pcie@11290000 {
+ compatible = "mediatek,mt7986-pcie",
+ "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0 0x11290000 0 0x2000>;
+ reg-names = "pcie-mac";
+ linux,pci-domain = <2>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0x00 0x28000000 0x00
+ 0x28000000 0x00 0x00200000>,
+ <0x82000000 0x00 0x28200000 0x00
+ 0x28200000 0x00 0x07e00000>;
+ clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P3>,
+ <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P3>,
+ <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P3>,
+ <&infracfg CLK_INFRA_133M_PCIE_CK_P3>;
+ clock-names = "pl_250m", "tl_26m", "peri_26m",
+ "top_133m";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3_pins>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc3 0>,
+ <0 0 0 2 &pcie_intc3 1>,
+ <0 0 0 3 &pcie_intc3 2>,
+ <0 0 0 4 &pcie_intc3 3>;
+ pcie_intc3: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ pcie@11300000 {
+ compatible = "mediatek,mt7986-pcie",
+ "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0 0x11300000 0 0x2000>;
+ reg-names = "pcie-mac";
+ linux,pci-domain = <0>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0x00 0x30000000 0x00
+ 0x30000000 0x00 0x00200000>,
+ <0x82000000 0x00 0x30200000 0x00
+ 0x30200000 0x00 0x07e00000>;
+ clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P0>,
+ <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P0>,
+ <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P0>,
+ <&infracfg CLK_INFRA_133M_PCIE_CK_P0>;
+ clock-names = "pl_250m", "tl_26m", "peri_26m",
+ "top_133m";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ pcie@11310000 {
+ compatible = "mediatek,mt7986-pcie",
+ "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0 0x11310000 0 0x2000>;
+ reg-names = "pcie-mac";
+ linux,pci-domain = <1>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0x00 0x38000000 0x00
+ 0x38000000 0x00 0x00200000>,
+ <0x82000000 0x00 0x38200000 0x00
+ 0x38200000 0x00 0x07e00000>;
+ clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P1>,
+ <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P1>,
+ <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P1>,
+ <&infracfg CLK_INFRA_133M_PCIE_CK_P1>;
+ clock-names = "pl_250m", "tl_26m", "peri_26m",
+ "top_133m";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_pins>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
t-phy@11c50000 {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";