| Message ID | 20241217154345.276919-8-angelogioacchino.delregno@collabora.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for MT8195/88 DPI, HDMIv2 and DDCv2 | expand |
On Tue, 17 Dec 2024 16:43:19 +0100, AngeloGioacchino Del Regno wrote: > Add a binding for the HDMI TX v2 Encoder found in MediaTek MT8195 > and MT8188 SoCs. > > This fully supports the HDMI Specification 2.0b, hence it provides > support for 3D-HDMI, Polarity inversion, up to 16 bits Deep Color, > color spaces including RGB444, YCBCR420/422/444 (ITU601/ITU709) and > xvYCC, with output resolutions up to 3840x2160p@60Hz. > > Moreover, it also supports HDCP 1.4 and 2.3, Variable Refresh Rate > (VRR) and Consumer Electronics Control (CEC). > > This IP also includes support for HDMI Audio, including IEC60958 > and IEC61937 SPDIF, 8-channel PCM, DSD, and other lossless audio > according to HDMI 2.0. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > .../mediatek/mediatek,mt8195-hdmi.yaml | 154 ++++++++++++++++++ > 1 file changed, 154 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.example.dtb: hdmi-tx@1c300000: i2c: False schema does not allow {'compatible': ['mediatek,mt8195-hdmi-ddc'], 'clocks': [[4294967295]]} from schema $id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.example.dtb: hdmi-tx@1c300000: i2c: Unevaluated properties are not allowed ('clocks', 'compatible' were unexpected) from schema $id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi.yaml# Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.example.dtb: /example-0/soc/hdmi-tx@1c300000/i2c: failed to match any schema with compatible: ['mediatek,mt8195-hdmi-ddc'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241217154345.276919-8-angelogioacchino.delregno@collabora.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml new file mode 100644 index 000000000000..73b1dfaa1adb --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek HDMI-TX v2 Encoder + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - CK Hu <ck.hu@mediatek.com> + +description: + The MediaTek HDMI-TX v2 encoder can generate HDMI format data based on + the HDMI Specification 2.0b. + +properties: + compatible: + enum: + - mediatek,mt8188-hdmi-tx + - mediatek,mt8195-hdmi-tx + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: HDMI Peripheral Bus (APB) clock + - description: HDCP and HDMI_TOP clock + - description: HDCP and HDMI_TOP reference clock + - description: VPP HDMI Split clock + + clock-names: + items: + - const: bus + - const: hdcp + - const: hdcp24m + - const: hdmi-split + + i2c: + type: object + $ref: /schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml + unevaluatedProperties: false + description: HDMI DDC I2C controller + + phys: + maxItems: 1 + description: PHY providing clocking TMDS and pixel to controller + + phy-names: + items: + - const: hdmi + + pinctrl-0: true + + pinctrl-names: + items: + - const: default + + power-domains: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port, usually connected to the output port of a DPI + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port that must be connected either to the input port of + a HDMI connector node containing a ddc-i2c-bus, or to the input + port of an attached bridge chip, such as a SlimPort transmitter. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - power-domains + - phys + - phy-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8195-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + hdmi-tx@1c300000 { + compatible = "mediatek,mt8195-hdmi-tx"; + reg = <0 0x1c300000 0 0x1000>; + clocks = <&topckgen CLK_TOP_HDMI_APB>, + <&topckgen CLK_TOP_HDCP>, + <&topckgen CLK_TOP_HDCP_24M>, + <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>; + clock-names = "bus", "hdcp", "hdcp24m", "hdmi-split"; + interrupts = <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + power-domains = <&spm MT8195_POWER_DOMAIN_HDMI_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + #sound-dai-cells = <1>; + + hdmitx_ddc: i2c { + compatible = "mediatek,mt8195-hdmi-ddc"; + clocks = <&clk26m>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_in: endpoint { + remote-endpoint = <&dpi1_out>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + };
Add a binding for the HDMI TX v2 Encoder found in MediaTek MT8195 and MT8188 SoCs. This fully supports the HDMI Specification 2.0b, hence it provides support for 3D-HDMI, Polarity inversion, up to 16 bits Deep Color, color spaces including RGB444, YCBCR420/422/444 (ITU601/ITU709) and xvYCC, with output resolutions up to 3840x2160p@60Hz. Moreover, it also supports HDCP 1.4 and 2.3, Variable Refresh Rate (VRR) and Consumer Electronics Control (CEC). This IP also includes support for HDMI Audio, including IEC60958 and IEC61937 SPDIF, 8-channel PCM, DSD, and other lossless audio according to HDMI 2.0. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- .../mediatek/mediatek,mt8195-hdmi.yaml | 154 ++++++++++++++++++ 1 file changed, 154 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml