@@ -38,6 +38,7 @@ aliases {
mmc0 = &usdhc1;
mmc1 = &usdhc2;
serial0 = &lpuart1;
+ ethernet0 = &enetc_port0;
};
bt_sco_codec: audio-codec-bt-sco {
@@ -428,6 +429,33 @@ &wdog3 {
status = "okay";
};
+&netcmix_blk_ctrl {
+ status = "okay";
+};
+
+&netc_blk_ctrl {
+ status = "okay";
+};
+
+&enetc_port0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enetc0>;
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&netc_emdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emdio>;
+ status = "okay";
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ realtek,clkout-disable;
+ };
+};
+
&scmi_iomuxc {
pinctrl_flexspi1: flexspi1grp {
fsl,pins = <
@@ -665,6 +693,30 @@ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
+
+ pinctrl_enetc0: enetc0grp {
+ fsl,pins = <
+ IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e
+ IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e
+ IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e
+ IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e
+ IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e
+ IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e
+ IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e
+ IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e
+ IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e
+ IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e
+ IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e
+ IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e
+ >;
+ };
+
+ pinctrl_emdio: emdiogrp{
+ fsl,pins = <
+ IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x57e
+ IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e
+ >;
+ };
};
&thermal_zones {
Add ENETC 0 (1G ethernet port) support for i.MX95-19x19-EVK board. In addition, because all ENETC instances share MDIO bus, so enable EMDIO at the same time. Signed-off-by: Wei Fang <wei.fang@nxp.com> --- .../boot/dts/freescale/imx95-19x19-evk.dts | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+)