diff mbox series

[v3,9/9] arm64: dts: imx8mp-kontron: Add support for reading SD_VSEL signal

Message ID 20241218152842.97483-10-frieder@fris.de (mailing list archive)
State New
Headers show
Series Use correct LDO5 control registers for PCA9450 | expand

Commit Message

Frieder Schrempf Dec. 18, 2024, 3:27 p.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

This fixes the LDO5 regulator handling of the pca9450 driver by
taking the status of the SD_VSEL into account to determine which
configuration register is used for the voltage setting.

Even without this change there is no functional issue, as the code
for switching the voltage in sdhci.c currently switches both, the
VSELECT/SD_VSEL signal and the regulator voltage at the same time
and doesn't run into an invalid corner case.

We should still make sure, that we always use the correct register
when controlling the regulator. At least in U-Boot this fixes an
actual bug where the wrong IO voltage is used and it makes sure
that the correct voltage can be read from sysfs.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes for v3:
* Rebase to next-20241218

Changes for v2:
* new patch
---
 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
index e0e9f6f7616d9..b97bfeb1c30f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
@@ -311,6 +311,7 @@  reg_nvcc_sd: LDO5 {
 				regulator-name = "NVCC_SD (LDO5)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			};
 		};
 	};
@@ -808,7 +809,7 @@  MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0 /* SDIO_A_D0 */
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
 		>;
 	};
 
@@ -820,7 +821,7 @@  MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4 /* SDIO_A_D0 */
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
 		>;
 	};
 
@@ -832,7 +833,7 @@  MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6 /* SDIO_A_D0 */
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
 		>;
 	};