| Message ID | 20250207090422.1609260-3-quic_vikramsa@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | media: qcom: camss: Add sc7280 support | expand |
On 2/7/2025 5:04 PM, Vikram Sharma wrote: > The Vision Mezzanine for the RB3 ships with an imx577 camera sensor. > Enable the IMX577 on the vision mezzanine. > > An example media-ctl pipeline for the imx577 is: > > media-ctl --reset > media-ctl -v -V '"imx577 '17-001a'":0[fmt:SRGGB10/4056x3040 field:none]' > media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]' > media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' > media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' > media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]' > media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' > > yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 > > Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com> > Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com> > Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 4 + > .../qcs6490-rb3gen2-vision-mezzanine.dtso | 89 +++++++++++++++++++ > 2 files changed, 93 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 140b0b2abfb5..213d941b1b79 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -116,6 +116,10 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs615-ride.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb > + > +qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo > + > +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso > new file mode 100644 > index 000000000000..2a59d2f22eb8 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso > @@ -0,0 +1,89 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. It's 2025 now, it should be 2024-2025. Thanks, Jie > + */ > + > +/* > + * Camera Sensor overlay on top of rb3gen2 core kit. > + */ > + > +/dts-v1/; > +/plugin/; > + > +#include <dt-bindings/clock/qcom,camcc-sc7280.h> > +#include <dt-bindings/gpio/gpio.h> > + > +&camss { > + vdda-phy-supply = <&vreg_l10c_0p88>; > + vdda-pll-supply = <&vreg_l6b_1p2>; > + > + status = "okay"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* The port index denotes CSIPHY id i.e. csiphy3 */ > + port@3 { > + reg = <3>; > + > + csiphy3_ep: endpoint { > + clock-lanes = <7>; > + data-lanes = <0 1 2 3>; > + remote-endpoint = <&imx577_ep>; > + }; > + }; > + }; > +}; > + > +&cci1 { > + status = "okay"; > +}; > + > +&cci1_i2c1 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + camera@1a { > + compatible = "sony,imx577"; > + > + reg = <0x1a>; > + > + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default", "suspend"; > + pinctrl-0 = <&cam2_default>; > + pinctrl-1 = <&cam2_suspend>; > + > + clocks = <&camcc CAM_CC_MCLK3_CLK>; > + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; > + assigned-clock-rates = <24000000>; > + > + dovdd-supply = <&vreg_l18b_1p8>; > + avdd-supply = <&vph_pwr>; > + dvdd-supply = <&vph_pwr>; > + > + port { > + imx577_ep: endpoint { > + link-frequencies = /bits/ 64 <600000000>; > + data-lanes = <1 2 3 4>; > + remote-endpoint = <&csiphy3_ep>; > + }; > + }; > + }; > +}; > + > +&tlmm { > + cam2_default: cam2-default-state { > + pins = "gpio67"; > + function = "cam_mclk"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + cam2_suspend: cam2-suspend-state { > + pins = "gpio67"; > + function = "cam_mclk"; > + drive-strength = <2>; > + bias-pull-down; > + }; > +};
On Fri, Feb 07, 2025 at 02:34:22PM +0530, Vikram Sharma wrote: > The Vision Mezzanine for the RB3 ships with an imx577 camera sensor. No, RB3 uses a different sensor. RB3 != RB3 Gen2. > Enable the IMX577 on the vision mezzanine. > > An example media-ctl pipeline for the imx577 is: > > media-ctl --reset > media-ctl -v -V '"imx577 '17-001a'":0[fmt:SRGGB10/4056x3040 field:none]' > media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]' > media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' > media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' > media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]' > media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' > > yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 140b0b2abfb5..213d941b1b79 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -116,6 +116,10 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs615-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb + +qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso new file mode 100644 index 000000000000..2a59d2f22eb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* + * Camera Sensor overlay on top of rb3gen2 core kit. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/qcom,camcc-sc7280.h> +#include <dt-bindings/gpio/gpio.h> + +&camss { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* The port index denotes CSIPHY id i.e. csiphy3 */ + port@3 { + reg = <3>; + + csiphy3_ep: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&imx577_ep>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx577"; + + reg = <0x1a>; + + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&cam2_default>; + pinctrl-1 = <&cam2_suspend>; + + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vreg_l18b_1p8>; + avdd-supply = <&vph_pwr>; + dvdd-supply = <&vph_pwr>; + + port { + imx577_ep: endpoint { + link-frequencies = /bits/ 64 <600000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + +&tlmm { + cam2_default: cam2-default-state { + pins = "gpio67"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam2_suspend: cam2-suspend-state { + pins = "gpio67"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; +};