diff mbox series

[dev,6.6,v2] ARM: dts: aspeed: yosemite4: add I3C config in DTS

Message ID 20250213085651.1483494-1-marshall_zhan@wiwynn.com (mailing list archive)
State New
Headers show
Series [dev,6.6,v2] ARM: dts: aspeed: yosemite4: add I3C config in DTS | expand

Commit Message

MarshallZhan-wiwynn Feb. 13, 2025, 8:56 a.m. UTC
Set I3C config in yosemite4 DTS.

Test plan:
Tested pass with aspeed I3C patches and I3C hub driver.

Signed-off-by: MarshallZhan-wiwynn <marshall_zhan@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)

--
2.25.1

WIWYNN PROPRIETARY
This email (and any attachments) contains proprietary or confidential information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. If you are not the intended recipient, please notify the sender and delete this email immediately.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index ab4904cf2c0e..3e67393d5291 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1317,6 +1317,92 @@  eeprom@50 {
        };
 };

+&i3c0 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i3c1_default>;
+       i3c-pp-scl-hi-period-ns = <62>;
+       i3c-pp-scl-lo-period-ns = <63>;
+       i3c-od-scl-hi-period-ns = <380>;
+       i3c-od-scl-lo-period-ns = <620>;
+       sda-tx-hold-ns = <10>;
+
+       mctp-controller;
+       hub@0x70 {
+               reg = <0x70 0x3c0 0x00700000>;
+               cp0-ldo-en = "enabled";
+               cp1-ldo-en = "enabled";
+               cp0-ldo-volt = "1.2V";
+               cp1-ldo-volt = "1.2V";
+               tp0145-ldo-en = "enabled";
+               tp2367-ldo-en = "enabled";
+               tp0145-ldo-volt = "1.2V";
+               tp2367-ldo-volt = "1.2V";
+               tp0145-pullup = "2k";
+               tp2367-pullup = "2k";
+
+               target-port@0 {
+                       mode = "i3c";
+                       pullup = "enabled";
+               };
+               target-port@1 {
+                       mode = "i3c";
+                       pullup = "enabled";
+               };
+               target-port@2 {
+                       mode = "i3c";
+                       pullup = "enabled";
+               };
+               target-port@3 {
+                       mode = "i3c";
+                       pullup = "enabled";
+               };
+       };
+};
+
+&i3c1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i3c2_default>;
+       i3c-pp-scl-hi-period-ns = <62>;
+       i3c-pp-scl-lo-period-ns = <63>;
+       i3c-od-scl-hi-period-ns = <380>;
+       i3c-od-scl-lo-period-ns = <620>;
+       sda-tx-hold-ns = <10>;
+
+       mctp-controller;
+       hub@0x70 {
+               reg = <0x70 0x3c0 0x00700000>;
+               cp0-ldo-en = "enabled";
+               cp1-ldo-en = "enabled";
+               cp0-ldo-volt = "1.2V";
+               cp1-ldo-volt = "1.2V";
+               tp0145-ldo-en = "enabled";
+               tp2367-ldo-en = "enabled";
+               tp0145-ldo-volt = "1.2V";
+               tp2367-ldo-volt = "1.2V";
+               tp0145-pullup = "2k";
+               tp2367-pullup = "2k";
+
+               target-port@0 {
+                       mode = "i3c";
+                       pullup = "enabled";
+               };
+               target-port@1 {
+                       mode = "i3c";
+                       pullup = "enabled";
+               };
+               target-port@2 {
+                       mode = "i3c";
+                       pullup = "enabled";
+               };
+               target-port@3 {
+                       mode = "i3c";
+                       pullup = "enabled";
+               };
+       };
+};
+
 &adc0 {
        status = "okay";
        pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default