| Message ID | 20250223-phy-sam-hdptx-bpc-v3-3-66a5c8e68327@collabora.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | phy: rockchip: samsung-hdptx: Support high color depth management | expand |
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c index f88369864c50e4563834ccbb26f1f9f440e99271..cf2c3a46604cb9d8c26fe5ec8346904e0b62848f 100644 --- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c +++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c @@ -320,6 +320,7 @@ #define LN3_TX_SER_RATE_SEL_HBR2_MASK BIT(3) #define LN3_TX_SER_RATE_SEL_HBR3_MASK BIT(2) +#define HDMI14_MAX_RATE 340000000 #define HDMI20_MAX_RATE 600000000 enum dp_link_rate { @@ -1072,7 +1073,7 @@ static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx, regmap_write(hdptx->regmap, LNTOP_REG(0200), 0x06); - if (rate >= 3400000) { + if (rate > HDMI14_MAX_RATE / 100) { /* For 1/40 bitrate clk */ rk_hdptx_multi_reg_write(hdptx, rk_hdtpx_tmds_lntop_highbr_seq); } else {
The switch from 1/10 to 1/40 clock ratio must happen when exceeding the 340 MHz rate limit of HDMI 1.4, i.e. when entering the HDMI 2.0 domain, and not before. While at it, introduce a define for this rate limit constant. Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> --- drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)