diff mbox series

[v2,8/9] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP and QRD platforms

Message ID 20250304-sm8750_usb_master-v2-8-a698a2e68e06@quicinc.com (mailing list archive)
State New
Headers show
Series phy: qcom: Introduce USB support for SM8750 | expand

Commit Message

Melody Olvera March 4, 2025, 9:56 p.m. UTC 
From: Wesley Cheng <quic_wcheng@quicinc.com>

Enable USB support on SM8750 MTP and QRD variants.  The current definition
will start the USB controller in peripheral mode by default until
dependencies are added, such as USB role detection.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 24 ++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 24 ++++++++++++++++++++++++
 2 files changed, 48 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 9e3aacad7bdab6848e86f8e45e04907e1c752a07..059eccbbc3fb05fc8806e36d35dc469d44443a26 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -792,3 +792,27 @@  &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
index f77efab0aef9bab751a947173bcdcc27df7295a8..01c0af643626917614fbd68cf8962ef947ca6548 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
@@ -790,3 +790,27 @@  &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};