diff mbox series

[v3,14/15] clk: sunxi-ng: a523: add reset lines

Message ID 20250304012805.28594-15-andre.przywara@arm.com (mailing list archive)
State New
Headers show
Series clk: sunxi-ng: add A523 clock support | expand

Commit Message

Andre Przywara March 4, 2025, 1:28 a.m. UTC 
Allwinner SoCs do not contain a separate reset controller, instead the
reset lines for the various devices are integrated into the "BGR" (Bus
Gate / Reset) registers, for each device group: one for all UARTs, one
for all SPI interfaces, and so on.
The Allwinner CCU driver also doubles as a reset provider, and since the
reset lines are indeed just single bits in those BGR register, we can
represent them easily in an array of structs, just containing the
register offset and the bit number.

Add the location of the reset bits for all devices in the A523/T527
SoCs, using the existing sunxi CCU infrastructure.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/clk/sunxi-ng/ccu-sun55i-a523.c | 84 ++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
index 7d46a5ccbb051..7b2ac2705773f 100644
--- a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
+++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
@@ -1526,11 +1526,95 @@  static struct clk_hw_onecell_data sun55i_a523_hw_clks = {
 	},
 };
 
+static struct ccu_reset_map sun55i_a523_ccu_resets[] = {
+	[RST_MBUS]		= { 0x540, BIT(30) },
+	[RST_BUS_NSI]		= { 0x54c, BIT(16) },
+	[RST_BUS_DE]		= { 0x60c, BIT(16) },
+	[RST_BUS_DI]		= { 0x62c, BIT(16) },
+	[RST_BUS_G2D]		= { 0x63c, BIT(16) },
+	[RST_BUS_SYS]		= { 0x64c, BIT(16) },
+	[RST_BUS_GPU]		= { 0x67c, BIT(16) },
+	[RST_BUS_CE]		= { 0x68c, BIT(16) },
+	[RST_BUS_SYS_CE]	= { 0x68c, BIT(17) },
+	[RST_BUS_VE]		= { 0x69c, BIT(16) },
+	[RST_BUS_DMA]		= { 0x70c, BIT(16) },
+	[RST_BUS_MSGBOX]	= { 0x71c, BIT(16) },
+	[RST_BUS_SPINLOCK]	= { 0x72c, BIT(16) },
+	[RST_BUS_CPUXTIMER]	= { 0x74c, BIT(16) },
+	[RST_BUS_DBG]		= { 0x78c, BIT(16) },
+	[RST_BUS_PWM0]		= { 0x7ac, BIT(16) },
+	[RST_BUS_PWM1]		= { 0x7ac, BIT(17) },
+	[RST_BUS_DRAM]		= { 0x80c, BIT(16) },
+	[RST_BUS_NAND]		= { 0x82c, BIT(16) },
+	[RST_BUS_MMC0]		= { 0x84c, BIT(16) },
+	[RST_BUS_MMC1]		= { 0x84c, BIT(17) },
+	[RST_BUS_MMC2]		= { 0x84c, BIT(18) },
+	[RST_BUS_SYSDAP]	= { 0x88c, BIT(16) },
+	[RST_BUS_UART0]		= { 0x90c, BIT(16) },
+	[RST_BUS_UART1]		= { 0x90c, BIT(17) },
+	[RST_BUS_UART2]		= { 0x90c, BIT(18) },
+	[RST_BUS_UART3]		= { 0x90c, BIT(19) },
+	[RST_BUS_UART4]		= { 0x90c, BIT(20) },
+	[RST_BUS_UART5]		= { 0x90c, BIT(21) },
+	[RST_BUS_UART6]		= { 0x90c, BIT(22) },
+	[RST_BUS_UART7]		= { 0x90c, BIT(23) },
+	[RST_BUS_I2C0]		= { 0x91c, BIT(16) },
+	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
+	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
+	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_I2C4]		= { 0x91c, BIT(20) },
+	[RST_BUS_I2C5]		= { 0x91c, BIT(21) },
+	[RST_BUS_CAN]		= { 0x92c, BIT(16) },
+	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
+	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
+	[RST_BUS_SPI2]		= { 0x96c, BIT(18) },
+	[RST_BUS_SPIFC]		= { 0x96c, BIT(19) },
+	[RST_BUS_EMAC0]		= { 0x97c, BIT(16) },
+	[RST_BUS_EMAC1]		= { 0x98c, BIT(16) | BIT(17) },	/* GMAC1-AXI */
+	[RST_BUS_IR_RX]		= { 0x99c, BIT(16) },
+	[RST_BUS_IR_TX]		= { 0x9cc, BIT(16) },
+	[RST_BUS_GPADC0]	= { 0x9ec, BIT(16) },
+	[RST_BUS_GPADC1]	= { 0x9ec, BIT(17) },
+	[RST_BUS_THS]		= { 0x9fc, BIT(16) },
+	[RST_USB_PHY0]		= { 0xa70, BIT(30) },
+	[RST_USB_PHY1]		= { 0xa74, BIT(30) },
+	[RST_BUS_OHCI0]		= { 0xa8c, BIT(16) },
+	[RST_BUS_OHCI1]		= { 0xa8c, BIT(17) },
+	[RST_BUS_EHCI0]		= { 0xa8c, BIT(20) },
+	[RST_BUS_EHCI1]		= { 0xa8c, BIT(21) },
+	[RST_BUS_OTG]		= { 0xa8c, BIT(24) },
+	[RST_BUS_3]		= { 0xa8c, BIT(25) },	/* BSP + register */
+	[RST_BUS_LRADC]		= { 0xa9c, BIT(16) },
+	[RST_BUS_PCIE_USB3]	= { 0xaac, BIT(16) },
+	[RST_BUS_DISPLAY0_TOP]	= { 0xabc, BIT(16) },
+	[RST_BUS_DISPLAY1_TOP]	= { 0xacc, BIT(16) },
+	[RST_BUS_HDMI_MAIN]	= { 0xb1c, BIT(16) },
+	[RST_BUS_HDMI_SUB]	= { 0xb1c, BIT(17) },
+	[RST_BUS_MIPI_DSI0]	= { 0xb4c, BIT(16) },
+	[RST_BUS_MIPI_DSI1]	= { 0xb4c, BIT(17) },
+	[RST_BUS_TCON_LCD0]	= { 0xb7c, BIT(16) },
+	[RST_BUS_TCON_LCD1]	= { 0xb7c, BIT(17) },
+	[RST_BUS_TCON_LCD2]	= { 0xb7c, BIT(18) },
+	[RST_BUS_TCON_TV0]	= { 0xb9c, BIT(16) },
+	[RST_BUS_TCON_TV1]	= { 0xb9c, BIT(17) },
+	[RST_BUS_LVDS0]		= { 0xbac, BIT(16) },
+	[RST_BUS_LVDS1]		= { 0xbac, BIT(17) },
+	[RST_BUS_EDP]		= { 0xbbc, BIT(16) },
+	[RST_BUS_VIDEO_OUT0]	= { 0xbcc, BIT(16) },
+	[RST_BUS_VIDEO_OUT1]	= { 0xbcc, BIT(17) },
+	[RST_BUS_LEDC]		= { 0xbfc, BIT(16) },
+	[RST_BUS_CSI]		= { 0xc1c, BIT(16) },
+	[RST_BUS_ISP]		= { 0xc2c, BIT(16) },	/* BSP + register */
+};
+
 static const struct sunxi_ccu_desc sun55i_a523_ccu_desc = {
 	.ccu_clks	= sun55i_a523_ccu_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun55i_a523_ccu_clks),
 
 	.hw_clks	= &sun55i_a523_hw_clks,
+
+	.resets		= sun55i_a523_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun55i_a523_ccu_resets),
 };
 
 static const u32 pll_regs[] = {