diff mbox series

[v5,3/5] arm64: dts: imx8mp: Configure dsp node for rproc usage

Message ID 20250317133306.2003909-4-daniel.baluta@nxp.com (mailing list archive)
State New
Headers show
Series Configure imx8mp dsp node for rproc usage | expand

Commit Message

Daniel Baluta March 17, 2025, 1:33 p.m. UTC 
DSP can be used with various frameworks (e.g audio firmware, rproc).
Currently 'dsp' configuration is intended for audio firmware but it
doesn't work well with board level DTs (e.g imx8mp-evk) because
board level DT enables audio related IPs (e.g SAI) while audio firmware
needs this IPs disabled (because firmware will configure them).

So, configure 'dsp' node to be used with rproc. This way users will be
able to use board DT to use the DSP as long as they don't clash with
Audio IP configurations.

More comples usage of 'dsp' node (e.g by audio firmware) will need to
create a separate dts file (or an overlay).

This change follows the approach taken for other i.MX8 boards
in commit 391a319c81f6d7 ("arm64: dts: imx8-ss-audio: configure dsp node
for rproc usage")

Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 5b443fbeded8..cbe8dfa3b3bc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -281,7 +281,7 @@  reserved-memory {
 		ranges;
 
 		dsp_reserved: dsp@92400000 {
-			reg = <0 0x92400000 0 0x2000000>;
+			reg = <0 0x92400000 0 0x1000000>;
 			no-map;
 			status = "disabled";
 		};
@@ -2416,12 +2416,12 @@  usb_dwc3_1: usb@38200000 {
 		};
 
 		dsp: dsp@3b6e8000 {
-			compatible = "fsl,imx8mp-dsp";
+			compatible = "fsl,imx8mp-hifi4";
 			reg = <0x3b6e8000 0x88000>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&mu2 2 0>, <&mu2 2 1>,
-				<&mu2 3 0>, <&mu2 3 1>;
+			power-domains = <&pgc_audio>;
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&mu2 0 0>, <&mu2 1 0>, <&mu2 3 0>;
+			firmware-name = "imx/dsp/hifi4.bin";
 			memory-region = <&dsp_reserved>;
 			resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>;
 			reset-names = "runstall";