arm64: dts: rockchip: Enable HDMI ports on ArmSoM W3

Commit Message

Jianfeng Liu March 17, 2025, 4:32 p.m. UTC

Enable the two HDMI ports on ArmSoM W3. And audio output of these two
ports are also enabled.

Signed-off-by: Jianfeng Liu <[e-mail]>
---

 .../boot/dts/rockchip/rk3588-armsom-w3.dts    | 101 ++++++++++++++++++
 1 file changed, 101 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
index 779cd1b1798c..6ad2759ddcca 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
@@ -4,6 +4,7 @@ 
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588-armsom-lm7.dtsi"
 
 / {
@@ -32,6 +33,28 @@  analog-sound {
 		pinctrl-0 = <&hp_detect>;
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -138,6 +161,54 @@  &combphy2_psu {
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
 &i2c6 {
 	status = "okay";
 
@@ -192,6 +263,14 @@  i2s0_8ch_p0_0: endpoint {
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
 &package_thermal {
 	polling-delay = <1000>;
 
@@ -406,3 +485,25 @@  &usb_host1_xhci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};