| Message ID | 20250328-s2mpg10-v2-1-b54dee33fb6b@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Samsung S2MPG10 PMIC MFD-based drivers | expand |
On Fri, Mar 28, 2025 at 01:28:47PM +0000, André Draszik wrote: > allOf: > + - if: > + properties: > + compatible: > + contains: > + const: samsung,s2mpg10-pmic > + then: > + properties: > + reg: false > + samsung,s2mps11-acokb-ground: false > + samsung,s2mps11-wrstbi-ground: false > + > + oneOf: > + - required: [interrupts] > + - required: [interrupts-extended] Drop, you should require only interrupts. OTOH, why regulators subnode is not needed? Commit msg mentions they exist, so they should be required. Binding does not change because you added or did not add yet some driver support. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml index ac5d0c149796b6a4034b5d4245bfa8be0433cfab..62d0e9f8a4d39add50a986af1836cfdcf065ad48 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -20,6 +20,7 @@ description: | properties: compatible: enum: + - samsung,s2mpg10-pmic - samsung,s2mps11-pmic - samsung,s2mps13-pmic - samsung,s2mps14-pmic @@ -58,16 +59,39 @@ properties: reset (setting buck voltages to default values). type: boolean + system-power-controller: true + wakeup-source: true required: - compatible - - reg - - regulators additionalProperties: false allOf: + - if: + properties: + compatible: + contains: + const: samsung,s2mpg10-pmic + then: + properties: + reg: false + samsung,s2mps11-acokb-ground: false + samsung,s2mps11-wrstbi-ground: false + + oneOf: + - required: [interrupts] + - required: [interrupts-extended] + + else: + properties: + system-power-controller: false + + required: + - reg + - regulators + - if: properties: compatible:
The Samsung S2MPG10 PMIC is similar to the existing PMICs supported by this binding. It is a Power Management IC for mobile applications with buck converters, various LDOs, power meters, RTC, clock outputs, and additional GPIOs interfaces. Unlike other Samsung PMICs, communication is not via I2C, but via the Samsung ACPM firmware, it therefore doesn't need a 'reg' property but needs to be a child of the ACPM firmware node instead. S2MPG10 can also act as a system power controller allowing implementation of a true cold-reset of the system. Support for the other components like regulators and power meters will be added in subsequent future patches. Signed-off-by: André Draszik <andre.draszik@linaro.org> --- v2: * drop ACPM phandle 'exynos,acpm-ipc', and expect this to be a child node of ACPM directly instead * allow, but still don't enforce, regulators subnode, to ease adding it in the future * deny 'reg' property, it's incorrect to optionally have it for S2MPG10 * enforce 'interrupts' or 'interrupts-extended' property. S2MPG10 can not work without. Note this is done as-is using the oneOf, because dtschema's fixups.py doesn't handle this nesting itself --- .../devicetree/bindings/mfd/samsung,s2mps11.yaml | 28 ++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-)