diff mbox series

[4/5] arm64: dts: ti: k3-am62x: Fix a few minor dtbs_check warnings in IMX219 overlay

Message ID 20250401114053.229534-5-y-abhilashchandra@ti.com (mailing list archive)
State New
Headers show
Series Fix dtbs_check warnings in CSI overlays | expand

Commit Message

Yemike Abhilash Chandra April 1, 2025, 11:40 a.m. UTC 
The IMX219 sensor device tree bindings do not include a clock-names
property. Remove the incorrectly added clock-names entry and also the
device tree incorrectly defined an I2C switch instead of an I2C mux.
According to the DT bindings, the correct terminology and node definition
should use "i2c-mux" instead of "i2c-switch". Hence, update the same to
avoid dtbs_check warnings.

Fixes: 4111db03dc05 ("arm64: dts: ti: k3-am62x: Add overlay for IMX219")
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
index 76ca02127f95..dd090813a32d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -22,7 +22,7 @@  &main_i2c2 {
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,7 +39,6 @@  ov5640: camera@10 {
 				reg = <0x10>;
 
 				clocks = <&clk_imx219_fixed>;
-				clock-names = "xclk";
 
 				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;