@@ -465,8 +465,6 @@ static int exynos4_mct_starting_cpu(unsigned int cpu)
per_cpu_ptr(&percpu_mct_tick, cpu);
struct clock_event_device *evt = &mevt->evt;
- snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
-
evt->name = mevt->name;
evt->cpumask = cpumask_of(cpu);
evt->set_next_event = exynos4_tick_set_next_event;
@@ -567,6 +565,14 @@ static int __init exynos4_timer_interrupts(struct device_node *np,
for (i = MCT_L0_IRQ; i < nr_irqs; i++)
mct_irqs[i] = irq_of_parse_and_map(np, i);
+ for_each_possible_cpu(cpu) {
+ struct mct_clock_event_device *mevt =
+ per_cpu_ptr(&percpu_mct_tick, cpu);
+
+ snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d",
+ cpu);
+ }
+
if (mct_int_type == MCT_INT_PPI) {
err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
The Exynos MCT driver doesn't set the clocksource name until the CPU hotplug state is setup which happens after the IRQs are requested. This results in an empty IRQ name which leads to the below warning at proc_create() time. When this happens, the userdata partition fails to mount and the device gets stuck in an endless loop printing the error: root '/dev/disk/by-partlabel/userdata' doesn't exist or does not contain a /dev. To fix this, we just need to initialize the name before requesting the IRQs. Warning from Pixel 6 kernel log: [ T430] name len 0 [ T430] WARNING: CPU: 6 PID: 430 at fs/proc/generic.c:407 __proc_create+0x258/0x2b4 [ T430] Modules linked in: dwc3_exynos(E+) [ T430] ufs_exynos(E+) phy_exynos_ufs(E) [ T430] phy_exynos5_usbdrd(E) exynos_usi(E+) exynos_mct(E+) s3c2410_wdt(E) [ T430] arm_dsu_pmu(E) simplefb(E) [ T430] CPU: 6 UID: 0 PID: 430 Comm: (udev-worker) Tainted: ... 6.14.0-next-20250331-4k-00008-g59adf909e40e #1 ... [ T430] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE [ T430] Hardware name: Raven (DT) [...] [ T430] Call trace: [ T430] __proc_create+0x258/0x2b4 (P) [ T430] proc_mkdir+0x40/0xa0 [ T430] register_handler_proc+0x118/0x140 [ T430] __setup_irq+0x460/0x6d0 [ T430] request_threaded_irq+0xcc/0x1b0 [ T430] mct_init_dt+0x244/0x604 [exynos_mct ...] [ T430] mct_init_spi+0x18/0x34 [exynos_mct ...] [ T430] exynos4_mct_probe+0x30/0x4c [exynos_mct ...] [ T430] platform_probe+0x6c/0xe4 [ T430] really_probe+0xf4/0x38c [...] [ T430] driver_register+0x6c/0x140 [ T430] __platform_driver_register+0x28/0x38 [ T430] exynos4_mct_driver_init+0x24/0xfe8 [exynos_mct ...] [ T430] do_one_initcall+0x84/0x3c0 [ T430] do_init_module+0x58/0x208 [ T430] load_module+0x1de0/0x2500 [ T430] init_module_from_file+0x8c/0xdc Signed-off-by: Will McVicker <willmcvicker@google.com> --- drivers/clocksource/exynos_mct.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)