diff mbox series

[v4,3/7] PCI: imx6: Toggle the cold reset for i.MX95 PCIe

Message ID 20250403053937.765849-4-hongxing.zhu@nxp.com (mailing list archive)
State New
Headers show
Series Add some enhancements for i.MX95 PCIe | expand

Commit Message

Richard Zhu April 3, 2025, 5:39 a.m. UTC 
Add the cold reset toggle for i.MX95 PCIe to align PHY's power up sequency.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 42 +++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 84d2f94e3da0..a2d65dc88b66 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -71,6 +71,9 @@ 
 #define IMX95_SID_MASK				GENMASK(5, 0)
 #define IMX95_MAX_LUT				32
 
+#define IMX95_PCIE_RST_CTRL			0x3010
+#define IMX95_PCIE_COLD_RST			BIT(0)
+
 #define to_imx_pcie(x)	dev_get_drvdata((x)->dev)
 
 enum imx_pcie_variants {
@@ -773,6 +776,43 @@  static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
 	return 0;
 }
 
+static int imx95_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+	u32 val;
+
+	if (assert) {
+		/*
+		 * From i.MX95 PCIe PHY perspective, the COLD reset toggle
+		 * should be complete after power-up by the following sequence.
+		 *                 > 10us(at power-up)
+		 *                 > 10ns(warm reset)
+		 *               |<------------>|
+		 *                ______________
+		 * phy_reset ____/              \________________
+		 *                                   ____________
+		 * ref_clk_en_______________________/
+		 * Toggle COLD reset aligned with this sequence for i.MX95 PCIe.
+		 */
+		regmap_set_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL,
+				IMX95_PCIE_COLD_RST);
+		/*
+		 * Make sure the write to IMX95_PCIE_RST_CTRL is flushed to the
+		 * hardware by doing a read. Otherwise, there is no guarantee
+		 * that the write has reached the hardware before udelay().
+		 */
+		regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL,
+				     &val);
+		udelay(15);
+		regmap_clear_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL,
+				  IMX95_PCIE_COLD_RST);
+		regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL,
+				     &val);
+		udelay(10);
+	}
+
+	return 0;
+}
+
 static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
 {
 	reset_control_assert(imx_pcie->pciephy_reset);
@@ -1755,6 +1795,7 @@  static const struct imx_pcie_drvdata drvdata[] = {
 		.ltssm_mask = IMX95_PCIE_LTSSM_EN,
 		.mode_off[0]  = IMX95_PE0_GEN_CTRL_1,
 		.mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
+		.core_reset = imx95_pcie_core_reset,
 		.init_phy = imx95_pcie_init_phy,
 	},
 	[IMX8MQ_EP] = {
@@ -1808,6 +1849,7 @@  static const struct imx_pcie_drvdata drvdata[] = {
 		.mode_off[0]  = IMX95_PE0_GEN_CTRL_1,
 		.mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
 		.init_phy = imx95_pcie_init_phy,
+		.core_reset = imx95_pcie_core_reset,
 		.epc_features = &imx95_pcie_epc_features,
 		.mode = DW_PCIE_EP_TYPE,
 	},