| Message ID | 21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Improve clock support for Actions S500 SoC | expand |
On Thu, Jun 10, 2021 at 11:05:24PM +0300, Cristian Ciocaltea wrote: > There are a few issues with the setup of the Actions Semi Owl S500 SoC's > clock chain involving AHPPREDIV, H and AHB clocks: > > * AHBPREDIV clock is defined as a muxer only, although it also acts as > a divider. > * H clock is using a wrong divider register offset > * AHB is defined as a multi-rate factor clock, but it is actually just > a fixed pass clock. > > Let's provide the following fixes: > > * Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition. > * Use the correct register shift value in the OWL_DIVIDER definition > for H clock > * Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an > ungated OWL_COMP_FIXED_FACTOR definition. > > Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > Changes in v3: > - Fixed the swapped flags between "ahbprediv_clk" and "ahb_clk" as noticed > by Mani > > Changes in v2: > - Reverted the addition of the clock div table for H clock to support the > '1' divider (according to the datasheet), even though the vendor > implementation marks it as reserved > > drivers/clk/actions/owl-s500.c | 19 +++++++++++-------- > 1 file changed, 11 insertions(+), 8 deletions(-) > > diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c > index 42d6899755e6..cbeb51c804eb 100644 > --- a/drivers/clk/actions/owl-s500.c > +++ b/drivers/clk/actions/owl-s500.c > @@ -153,11 +153,6 @@ static struct clk_factor_table hde_factor_table[] = { > { 0, 0, 0 }, > }; > > -static struct clk_factor_table ahb_factor_table[] = { > - { 1, 1, 2 }, { 2, 1, 3 }, > - { 0, 0, 0 }, > -}; > - > static struct clk_div_table rmii_ref_div_table[] = { > { 0, 4 }, { 1, 10 }, > { 0, 0 }, > @@ -186,7 +181,6 @@ static struct clk_div_table nand_div_table[] = { > > /* mux clock */ > static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RATE_PARENT); > -static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT); > > /* gate clocks */ > static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0); > @@ -199,16 +193,25 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0); > static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0); > > /* divider clocks */ > -static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0); > +static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 2, 2, NULL, 0, 0); > static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0); > static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0); > > /* factor clocks */ > -static OWL_FACTOR(ahb_clk, "ahb_clk", "h_clk", CMU_BUSCLK1, 2, 2, ahb_factor_table, 0, 0); > static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table, 0, 0); > static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0); > > /* composite clocks */ > +static OWL_COMP_DIV(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, > + OWL_MUX_HW(CMU_BUSCLK1, 8, 3), > + { 0 }, > + OWL_DIVIDER_HW(CMU_BUSCLK1, 12, 2, 0, NULL), > + CLK_SET_RATE_PARENT); > + > +static OWL_COMP_FIXED_FACTOR(ahb_clk, "ahb_clk", "h_clk", > + { 0 }, > + 1, 1, 0); > + > static OWL_COMP_FACTOR(vce_clk, "vce_clk", hde_clk_mux_p, > OWL_MUX_HW(CMU_VCECLK, 4, 2), > OWL_GATE_HW(CMU_DEVCLKEN0, 26, 0), > -- > 2.32.0 >
Quoting Cristian Ciocaltea (2021-06-10 13:05:24) > There are a few issues with the setup of the Actions Semi Owl S500 SoC's > clock chain involving AHPPREDIV, H and AHB clocks: > > * AHBPREDIV clock is defined as a muxer only, although it also acts as > a divider. > * H clock is using a wrong divider register offset > * AHB is defined as a multi-rate factor clock, but it is actually just > a fixed pass clock. > > Let's provide the following fixes: > > * Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition. > * Use the correct register shift value in the OWL_DIVIDER definition > for H clock > * Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an > ungated OWL_COMP_FIXED_FACTOR definition. > > Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> > --- Applied to clk-next
diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c index 42d6899755e6..cbeb51c804eb 100644 --- a/drivers/clk/actions/owl-s500.c +++ b/drivers/clk/actions/owl-s500.c @@ -153,11 +153,6 @@ static struct clk_factor_table hde_factor_table[] = { { 0, 0, 0 }, }; -static struct clk_factor_table ahb_factor_table[] = { - { 1, 1, 2 }, { 2, 1, 3 }, - { 0, 0, 0 }, -}; - static struct clk_div_table rmii_ref_div_table[] = { { 0, 4 }, { 1, 10 }, { 0, 0 }, @@ -186,7 +181,6 @@ static struct clk_div_table nand_div_table[] = { /* mux clock */ static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RATE_PARENT); -static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT); /* gate clocks */ static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0); @@ -199,16 +193,25 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0); static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0); /* divider clocks */ -static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0); +static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 2, 2, NULL, 0, 0); static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0); static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0); /* factor clocks */ -static OWL_FACTOR(ahb_clk, "ahb_clk", "h_clk", CMU_BUSCLK1, 2, 2, ahb_factor_table, 0, 0); static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table, 0, 0); static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0); /* composite clocks */ +static OWL_COMP_DIV(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, + OWL_MUX_HW(CMU_BUSCLK1, 8, 3), + { 0 }, + OWL_DIVIDER_HW(CMU_BUSCLK1, 12, 2, 0, NULL), + CLK_SET_RATE_PARENT); + +static OWL_COMP_FIXED_FACTOR(ahb_clk, "ahb_clk", "h_clk", + { 0 }, + 1, 1, 0); + static OWL_COMP_FACTOR(vce_clk, "vce_clk", hde_clk_mux_p, OWL_MUX_HW(CMU_VCECLK, 4, 2), OWL_GATE_HW(CMU_DEVCLKEN0, 26, 0),
There are a few issues with the setup of the Actions Semi Owl S500 SoC's clock chain involving AHPPREDIV, H and AHB clocks: * AHBPREDIV clock is defined as a muxer only, although it also acts as a divider. * H clock is using a wrong divider register offset * AHB is defined as a multi-rate factor clock, but it is actually just a fixed pass clock. Let's provide the following fixes: * Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition. * Use the correct register shift value in the OWL_DIVIDER definition for H clock * Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an ungated OWL_COMP_FIXED_FACTOR definition. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> --- Changes in v3: - Fixed the swapped flags between "ahbprediv_clk" and "ahb_clk" as noticed by Mani Changes in v2: - Reverted the addition of the clock div table for H clock to support the '1' divider (according to the datasheet), even though the vendor implementation marks it as reserved drivers/clk/actions/owl-s500.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)