[3/3] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions

Commit Message

Vivek Unune Oct. 7, 2020, 7:01 p.m. UTC

This router has dual paritions to store trx firmware image and
dual partitions for nvram. The second one for acts as a backup store.

When tested with OpenWrt, the default partition parser causes two issues:

1. It labels both nvram partitions as nvram. In factory, second one is
labeled devinfo.
2. It parses second trx image and tries to create second 'linux' partition
and fails with - cannot create another 'linux' partition

The following patch works around both of these issues.

Signed-off-by: Vivek Unune <[e-mail]>
---
 .../boot/dts/bcm47094-linksys-panamera.dts    | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

Patch

diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index b36ed0ead733..488e83c1780d 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -281,3 +281,44 @@  fixed-link {
 &usb3_phy {
 	status = "okay";
 };
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "devinfo";
+			reg = <0x0180000 0x080000>;
+		};
+
+		partition@200000 {
+			label = "firmware";
+			reg = <0x0200000 0x01D00000>;
+			compatible = "brcm,trx";
+		};
+
+		partition@1F00000 {
+			label = "failsafe";
+			reg = <0x01F00000 0x01D00000>;
+			read-only;
+		};
+
+		partition@0x5200000 {
+			label = "brcmnand";
+			reg = <0x05200000 0x02E00000>;
+		};
+	};
+};