diff mbox series

[08/22] ARM: dts: r7s9210: Add USB clock

Message ID 283f881a4d3762354d20217bc0306ee850b3c685.1561104194.git.horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show
Series [GIT,PULL] Renesas ARM Based SoC DT Updates for v5.3 | expand

Commit Message

Simon Horman June 21, 2019, 9:13 a.m. UTC 
From: Chris Brandt <chris.brandt@renesas.com>

Add USB clock node. If present, this clock input must be 48MHz.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s9210.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index 2eaa5eeba509..73041f04fef5 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -30,6 +30,13 @@ 
 		clock-frequency = <0>;
 	};
 
+	usb_x1_clk: usb_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value (48000000) must be set by board */
+		clock-frequency = <0>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;