Message ID | 2add7cb9193b96211f5e5938cbfc6181c76e2591.1470739193.git.peter.senna@collabora.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Patch 1/4 is already on linux-next, but what about this one? Ping? On Tuesday, August 9, 2016 18:41 CEST, Peter Senna Tschudin <peter.senna@collabora.com> wrote: > Devicetree bindings documentation for the GE B850v3 LVDS/DP++ > display bridge. > > Cc: Martyn Welch <martyn.welch@collabora.co.uk> > Cc: Martin Donnelly <martin.donnelly@ge.com> > Cc: Javier Martinez Canillas <javier@dowhile0.org> > Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> > Cc: Philipp Zabel <p.zabel@pengutronix.de> > Cc: Rob Herring <robh@kernel.org> > Cc: Fabio Estevam <fabio.estevam@nxp.com> > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> > --- > Unchanged from V4 > > Changes from V3: > - 2/4 instead of 3/5 > > Unchanged from V2 > > Changes from V1: > - Replaced '_' by '-' in node names or compatible strings > - Added missing @73 to the example > > > .../devicetree/bindings/ge/b850v3-lvds-dp.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt > > diff --git a/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt > new file mode 100644 > index 0000000..f05c3e9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt > @@ -0,0 +1,37 @@ > +Driver for GE B850v3 LVDS/DP++ display bridge > + > +Required properties: > + - compatible : should be "ge,b850v3-lvds-dp". > + - reg : should contain the address used to ack the interrupts. > + - interrupt-parent : phandle of the interrupt controller that services > + interrupts to the device > + - interrupts : one interrupt should be described here, as in > + <0 IRQ_TYPE_LEVEL_HIGH>. > + - edid-reg : should contain the address used to read edid information > + - port : should describe the video signal connection between the host > + and the bridge. > + > +Example: > + > +&mux2_i2c2 { > + status = "okay"; > + clock-frequency = <100000>; > + > + b850v3-lvds-dp-bridge@73 { > + compatible = "ge,b850v3-lvds-dp"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg = <0x73>; > + interrupt-parent = <&gpio2>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + > + edid-reg = <0x72>; > + > + port { > + b850v3_dp_bridge_in: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + }; > +}; > -- > 2.5.5 >
diff --git a/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt new file mode 100644 index 0000000..f05c3e9 --- /dev/null +++ b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt @@ -0,0 +1,37 @@ +Driver for GE B850v3 LVDS/DP++ display bridge + +Required properties: + - compatible : should be "ge,b850v3-lvds-dp". + - reg : should contain the address used to ack the interrupts. + - interrupt-parent : phandle of the interrupt controller that services + interrupts to the device + - interrupts : one interrupt should be described here, as in + <0 IRQ_TYPE_LEVEL_HIGH>. + - edid-reg : should contain the address used to read edid information + - port : should describe the video signal connection between the host + and the bridge. + +Example: + +&mux2_i2c2 { + status = "okay"; + clock-frequency = <100000>; + + b850v3-lvds-dp-bridge@73 { + compatible = "ge,b850v3-lvds-dp"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + edid-reg = <0x72>; + + port { + b850v3_dp_bridge_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +};