@@ -100,8 +100,6 @@
spi0: spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
@@ -138,11 +136,6 @@
marvell,function = "gpio";
};
- pmx_spi: pmx-spi {
- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
- marvell,function = "spi";
- };
-
pmx_phy_int: pmx-phy-int {
marvell,pins = "mpp32";
marvell,function = "gpio";
@@ -53,6 +53,11 @@
reg = <0x11100 0x100>;
};
+ spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ };
+
uart2: serial@12200 {
compatible = "snps,dw-apb-uart";
pinctrl-0 = <&uart2_pins>;
@@ -240,6 +245,12 @@
marvell,function = "sd0";
};
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp36", "mpp37",
+ "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+
uart2_pins: uart2-pins {
marvell,pins = "mpp42", "mpp43";
marvell,function = "uart2";
This patch defines common Armada XP pinctrl settings in armada-xp.dtsi for the supported SPI interface (MPP36-39) and use it as default for Armada XP spi interface. That being done, it removes the now redundant definitions in armada-xp-axpwifiap.dts. Note: this patch has the potential to break out-of-tree users w/o specific pinctrl settings for their spi interfaces if the default above does not match their config (i.e. if they do not use CS0). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> --- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 7 ------- arch/arm/boot/dts/armada-xp.dtsi | 11 +++++++++++ 2 files changed, 11 insertions(+), 7 deletions(-)